Abstract:The purposes of this paper are sixfold. First, any micromechanics model for predicting elastic property (stiffness) of a composite is applicable to a reasonable prediction of a composite strength, provided that the homogenized internal stresses in the matrix are converted into true values. The conversion for all of the stress components free of biaxially transverse loads is presented in the paper. Second, the predictability of 12 well-known micromechanics models for stiffness and strength of a unidirectional composite is assessed against the measured data of all of the nine unidirectional composites used in three world-wide failure exercises. An accuracy ranking is made accordingly. Third, it is demonstrated that the smallest fiber volume in a representative volume element for a finite element approach plays a more dominant role than other issues such as a random fiber array to achieve the highest simulation accuracy. This feature has been largely ignored in the current literature. Fourth, a consistency of a micromechanics model in calculating the internal stresses in the fiber and matrix of the composite is an issue that should be taken into account. Among the 12 models considered, only Bridging Model is consistent. A non-consistency implies that a full three-dimensional approach should be used to predict an effective property of the composite even though it is subjected to a uniaxial load. Fifth, an effective method to detect an interface debonding between the fiber and matrix subjected to an arbitrary load is presented in the paper. Only a transverse tensile strength of the composite, in addition to the original fiber and matrix properties, is needed. Whereas essentially any load can cause the interface to debond earlier before a composite failure, only a transverse tensile load carrying capacity of the composite is influenced significantly by the debonding. Specifically, an interface debonding has insignificant effect on a shear strength of the composite. Sixth, a fiber misalignment-induced kink band failure is analyzed by virtue of the original fiber and matrix properties, and a longitudinal compressive strength is predicted micromechanically.

Prediction of the tensile properties of biocomposites: a review of micro-mechanical models

Multi-Scale Modelling of Long-Term Mechanical Behaviour in Polymer Composite Laminates with Woven Fibre Architecture

Review on Modeling of Mechanical and Thermal Properties of Nano- and Micro-Composites

Numerical modeling of fiber reinforced polymer textile composites for characterizing the mechanical behavior – a review

On micromechanics approach to stiffness and strength of unidirectional composites

Analytical Micromechanics Models for Elastoplastic Behavior of Long Fibrous Composites: A Critical Review and Comparative Study

Exploring biofiber properties and their influence on biocomposite tensile properties

Prediction of elastic properties of woven polymer composites using micromechanical models and measured microstructural parameters

Tensile Performance Mechanism for Bamboo Fiber-Reinforced, Palm Oil-Based Resin Bio-Composites Using Finite Element Simulation and Machine Learning

Numerical Simulation of the Mechanical Behavior of a Weft-Knitted Carbon Fiber Composite under Tensile Loading

Tensile mechanical performance of natural/natural fiber reinforced hybrid bio-composite materials – A statistical approach

An Analytical Model for the Uniaxial Tensile Modulus of Plain-Woven Fabric Composites and Its Application and Experimental Validation

A Multiscale Model for Predicting Mechanical Properties of Polymer Composites

Prediction of the Inter-Fiber Mechanical Properties of Composites: Part I Standardization Micro-Scale Modelling Method and Damage Analysis

Prediction Models of Mechanical Properties of Jute/PLA Composite Based on X-ray Computed Tomography

Multiscale Computational and Artificial Intelligence Models of Linear and Nonlinear Composites: A Review

Prediction for the mechanical property of short fiber-reinforced polymer composites through process modeling method

Prediction of Tensile Strength of Short Fiber Reinforced Elastomer Composites

Micromechanical modeling of discontinuous long fiber reinforced composites

An Experimental and Metamodeling Approach to Tensile Properties of Natural Fibers Composites

Multiscale analysis method and experiments for the transverse mechanical property of unidirectional fiber-reinforced composites