Abstract:Abstract This paper presents 3D Fabry–Pérot (FP) cavities fabricated directly onto cleaved ends of low-loss optical fibers by a two-photon polymerization (2PP) process. This fabrication technique is quick, simple, and inexpensive compared to planar microfabrication processes, which enables rapid prototyping and the ability to adapt to new requirements. These devices also utilize true 3D design freedom, facilitating the realization of microscale optical elements with challenging geometries. Three different device types were fabricated and evaluated: an unreleased single-cavity device, a released dual-cavity device, and a released hemispherical mirror dual-cavity device. Each iteration improved the quality of the FP cavity’s reflection spectrum. The unreleased device demonstrated an extinction ratio around 1.90, the released device achieved 61, and the hemispherical device achieved 253, providing a strong signal to observe changes in the free spectral range of the device’s reflection response. The reflectance of the photopolymer was also estimated to be between 0.2 and 0.3 over the spectrum of interest. The dual-cavity devices include both an open cavity, which can interact with an interstitial medium, and a second solid cavity, which provides a static reference reflection. The hemispherical dual-cavity device further improves the quality of the reflection signal with a more consistent resonance, and reduced sensitivity to misalignment. These advanced features, which are very challenging to realize with traditional planar microfabrication techniques, are fabricated in a single patterning step. The usability of these FP cavities as thermal radiation sensors with excellent linear response and sensitivity over a broad range of temperature is reported. The 3D structuring capability the 2PP process has enabled the creation of a suspended FP heat sensor that exhibited linear response over the temperature range of 20 oC –120 oC; temperature sensitivity of ∼50 pm oC −1 at around 1550 nm wavelength; and sensitivity improvement of better than 9x of the solidly-mounted sensors.

Dynamic and Wavelength‐Dependent Optical Transmission Control with Uniform Bending and Recovery of Shape Memory Nanopillars

4D Printing of a Digital Shape Memory Polymer with Tunable High Performance

Optical Device Based on a Nanopillar Array by the Pattern Transfer of an Anodic Aluminum Oxide Membrane

Deformable, Programmable, and Shape-Memorizing Micro-Optics

High-Performance Multifunctional Shape Memory Epoxy with Hybrid Graphene Oxide and Carbon Nanotube Reinforcement

Digital Laser Direct Writing of Internal Stress in Shape Memory Polymer for Anticounterfeiting and 4D Printing.

Frequency Control of Beams and Cylindrical Shells With Light-Activated Shape Memory Polymers

Stiff Shape Memory Polymers for High-Resolution Reconfigurable Nanophotonics.

Light‐Coded Digital Crystallinity Patterns Toward Bioinspired 4D Transformation of Shape‐Memory Polymers

Frequency Control Of Light-Activated Shape Memory Polymer Laminated Beams: Characterization And Experiments

Shape Memory Polymers with Patternable Recovery Onset Regulated by Light

Wrinkling of Silicon Nanoribbons on Shape Memory Polymers

Integrated Photonics Put at Full Stretch: Flexible and Stretchable Photonic Devices Enabled by Optical and Mechanical Co-Design

Precise Controlling of Friction and Adhesion on Reprogrammable Shape Memory Micropillars

Experimental Study of Frequency Control of LaSMP Laminated Beams

Three-dimensional Fabry–Pérot cavities sculpted on fiber tips using a multiphoton polymerization process

Actuation of Light-Activated Shape Memory Polymer Laminated Beams: Theory and Experiment

Shape memory photonic materials: fabrication and emerging applications

Shape Matters: A Gold Nanoparticle Enabled Shape Memory Polymer Triggered by Laser Irradiation

Precise stimulation of near-infrared light responsive shape-memory polymer composites using upconversion particles with photothermal capability

On-Demand Shape Recovery Kinetics Modulation with A Wide Regulation Range and Spatially Heterogeneous Shape Recovery Rate