Abstract:Fe3O4 nanoparticles were synthesized by an eco‐friendly process and were used as adsorbents to remove methylene blue from aqueous solutions. The effects of pH, adsorbent dose, kinetics, isotherm, and thermodynamics parameters were studied. The adsorption systems were found to be compatible with the Langmuir isotherm model and the pseudo‐second‐order kinetic model. The magnetic properties of the adsorbents allow them to be separated from wastewater by simple separation. For the optimization of the adsorption variables, response surface methodology was successfully applied, and optimum values of these variables were determined with a quadratic model equation. Water coloring has the properties of resistance to mutagenic, toxic, aggressive, carcinogenic, destructive, strong light and unstable oxidation and air pollution and has serious effects on environmental systems and human health. Because of its severe toxicity, methylene blue (MB) can cause cancer, mutagenesis, and teratogenic consequences in people as well as enter the food chain. The main objective of this investigation is to study the modeling and the optimization parameters of MB adsorption using a low‐cost adsorbent Fe3O4. The parameters evaluated for adsorption are the adsorbent dosage, pH, contact time, and temperature using the response surface methodology. The principal variables affecting MB removal were pH (3–11), catalyst dosage (0.01–0.3 g), contact duration (10–180 min), and temperature (25–55 °C). To select an experimental domain, a preliminary study was performed first. The results showed that at pH 10, 1.4 g L−1 Fe3O4‐nanoparticles (NPs) had the highest removal efficiency of cationic dye MB (20 ppm) from aqueous solutions by batch adsorption technique. The pseudo‐second‐order (PSO) kinetic models and the Langmuir isotherm provided the best fit for the adoption of MB. The adsorption process was exothermic and spontaneous, according to thermodynamics studies. To determine the effect of the investigated variables and their interaction on the adsorption process, a Box–Behnken design was used. A second‐order polynomial equation was used to model the experimental results. The experimental findings were consistent with the suggested model as demonstrated by the high value of the determination coefficient. The performance of the model equation verified the experimental observation with just a slight divergence, and the values acquired from the experiment and model predictions were found to be in suitable agreement. According to the numerical optimization, 98.61 % is the optimal elimination efficiency for MB adsorption. These results suggest that an adsorption process utilizing Fe3O4 NPs is efficient in environmental remediation.

Machine learning and modelling approach for removing methylene blue from aqueous solutions: Optimization, kinetics and thermodynamics studies

Modeling and optimization of process parameters of MB dye adsorption using waste-derived chemically activated biosorbents

Integrating artificial neural networks and response surface methodology for predictive modeling and mechanistic insights into the detoxification of hazardous MB and CV dyes using Saccharum officinarum L. biomass

Introducing machine learning model to response surface methodology for biosorption of methylene blue dye using Triticum aestivum biomass

Intelligent modeling of dye removal by aluminized activated carbon

Sustainable adsorption of methylene blue by biocompatible agro waste biomass: optimization, kinetic isotherms, and ecotoxicity evaluation

Kinetics, mechanism, isotherms, and design analysis on the removal of toxic dye from water using surface-modified agro-waste biomass

Computational intelligence for empirical modelling and optimization of methylene blue adsorption phenomena utilizing an activated carbon‐supported [Co(NH3)6]Cl3 complex

Application of response surface and artificial neural network optimization approaches for exploring methylene blue adsorption using luffa fiber treated with sodium chlorite

Integrating DFT and machine learning for the design and optimization of sodium alginate-based hydrogel adsorbents: Efficient removal of pollutants from wastewater

Functionalized Bioadsorbent Application on Methylene Blue Removal From Wastewater—A Review

Methylene Blue Adsorption by Fe3O4 Nanoparticles: An Optimization Study Using Response Surface Methodology

Biosorption of methylene blue by bone meal: experimental and modeling with machine learning and full factorial design

Optimizing Methylene Blue Dye Adsorption onto Liquid Natural Rubber-Based Hydrogel: Kinetics, Isotherms and Reusability

Prediction and optimizing of methylene blue sequestration to activated charcoal/magnetic nanocomposites using artificial neutral network and response surface methodology

Isotherms, kinetics and thermodynamic mechanism of methylene blue dye adsorption on synthesized activated carbon

Synthesis and characterization of modified activated carbon (MgO/AC) for methylene blue adsorption: optimization, equilibrium isotherm and kinetic studies

Machine learning approaches for the treatment of textile wastewater using sugarcane bagasse (Saccharum officinarum) biochar

Investigating the adsorption potential of char derived from waste latex for methylene blue removal

Synthesis of potential bio-adsorbent from Indian Neem leaves (Azadirachta indica) and its optimization for malachite green dye removal from industrial wastes using response surface methodology: kinetics, isotherms and thermodynamic studies

Ensemble meta machine learning for predicting the adsorption of anionic and cationic dyes from aqueous solutions using Polymer/graphene/clay/MgFeAl-LTH nanocomposite