Abstract:Background It is crucial to introduce new strategies to intensify the efficiency of photovoltaic thermal (PVT) unit. The incorporation of a thermoelectric generator (TEG) within a solar unit can notably improve its electrical performance. Additionally, modifying the properties of the cooling fluid by incorporating nano-powders proves to be an effective approach in optimizing PVT systems. Methods This study delves into an inventive design for a PVT unit, exploring novel techniques to boost its performance. To enhance the cooling of the PV component, two strategies were employed: 1) the implementation of a new-style turbulator, and 2) the integration of confined jets. Thus, three cases were simulated: case 1 (without any enhancement), case 2 (with the turbulator), and case 3 (employing both techniques). Additionally, the TEG layer was incorporated with the PV layers to augment overall efficiency. The testing fluid, water, was infused with SiO 2 nanoparticles, and their properties were determined using a homogeneous mixture formulation. For simulating the current 3D model, the Finite Volume Method was chosen, accounting for laminar flow in fluid zones and applying the pure conduction equation for solid zones. The impacts of altering geometry, heat flux (G), inlet velocity within the tube (V i ), and jet (V j ) on performance metrics (including PV electrical (η PV ), thermoelectric (η TE ), thermal (η th ), overall electrical (η El ), total (η Tot )) have been detailed in the results section. Significant findings By implementing two cooling techniques, the uniformity of panel temperature experiences a notable enhancement of about 79.96 %. With an increase in the velocity of the nanofluid within the tube, there is an approximately 1.99 % improvement in the value of η Tot . Furthermore, when V i =0.08 m/s, the values of η El , and η Tot see an increase of about 3.09 % and 12.59 %, respectively, upon the installation of the jet and turbulator. An augmentation in G leads to a rise in η Tot by approximately 5.32 % and 7.32 % for cases 1 and 3, respectively. When G = 810 W/m 2 , incorporating a jet and turbulator in the PVT system results in improvements of about 2.64 % in η El , and 10.45 % in η Tot . The increment of η Tot with switching from case 1 to case 3 enhances about 24.62 % with the rise of G. Moreover, as the inlet velocity of the jet increases, the values of η TE , η th , and η Tot enhance by about 3.43 %, 1.87 %, and 1.06 %, respectively. Graphical abstract Download : Download high-res image (124KB) Download : Download full-size image

Enhancing PVT/air system performance with impinging jet and porous media: A computational approach with machine learning predictions

Improving the performance of solar photovoltaic thermal cells using jet impingement and phase change materials cooling technology

Energy-economic-environmental analysis of bifacial photovoltaic thermal (BPVT) solar air collector with jet impingement

Predicting the performance of a photovoltaic unit via machine learning methods in the existence of finned thermal storage unit

Environmental and energy analysis for photovoltaic-thermoelectric solar unit in existence of nanofluid cooling reporting CO 2 emission reduction

Experimental evaluation of photovoltaic thermal (PVT) system using a modular heat collector with flat back shape fins, pipe, nanofluids and phase change material

Outdoor Performance Analysis of a Photovoltaic Thermal (PVT) Collector with Jet Impingement and Compound Parabolic Concentrator (CPC)

Experimental investigation on thermal management of a photovoltaic module using water-jet impingement cooling

A comprehensive investigation of porous media's effects on the performance of photovoltaic thermal systems

Numerical analysis and optimization of a novel photovoltaic thermal solar unit improved by Nano-PCM as an energy storage media and finned collector

Performance Improvement of a Photovoltaic-Thermal System Using a Wavy-Strip Insert with and Without Nanofluid

A Comprehensive Investigation of Porous Media’s Effects on the Performance of Photovoltaic Thermal Systems

Evaluation of electrical efficiency of photovoltaic thermal solar collector

Mixed convection air-cooled PV/T solar collector with integrate porous medium

Efficiency upgrading of solar PVT finned hybrid system in Bangladesh: Flow rate and temperature influences

Effects of Forced Convection on the Performance of a Photovoltaic Thermal System: an Experimental Study

Performance’s improvement methods of PV solar panel by different cooling systems: A review of experimental and numerical studies

Simulation of solar photovoltaic system integrated with TEG in presence of hybrid nanomaterial

Heat transfer and energy performance analysis of photovoltaic thermal system using functionalized carbon nanotubes enhanced phase change material

Optimization Assessment and Performance Analysis of an Ingenious Hybrid Parabolic Trough Collector: A Machine Learning Approach

Heat pipes and nanofluids utilization for cooling photovoltaic panels: an application of hybrid machine learning and optimization models