Abstract:MXene aerogels with a porous microstructure are a promising electromagnetic interference (EMI) shielding material due to its low density and excellent electrical conductivity, which has attracted widespread attention. Compared with traditional EMI shielding materials that rely on reflection as the primary mechanism, MXene aerogels with absorption as the dominant mechanism have greater potential for development as a novel EMI shielding material because of its ability to reduce environmental contamination from reflected electromagnetic (EM) waves from materials. In this study, a novel Ti3C2Tx MXene/PEDOT:PSS hybrid aerogel was presented by freeze-drying and thermal annealing using few-layered Ti3C2Tx MXene and the conductive polymer poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT:PSS). PEDOT:PSS not only improved the gelling ability of Ti3C2Tx but also successfully established a conductive bridge between MXene nanosheets. The experimental results demonstrated that the hybrid aerogel exhibited an obvious porous microstructure, which was beneficial for the multiple scattering of EM waves within the materials. The EMI shielding effectiveness and specific shielding effectiveness reached up to 59 dB and 10,841 dB·cm2·g-1, respectively, while the SER/SET ratio value was only 0.05, indicating superior wave absorption performance. Furthermore, the good impedance matching, due to the electrical conductance loss and polarization loss effect of the composites, plays a critical role in their excellent wave absorption and EMI shielding performance. Therefore, this work provides a practical approach for designing and fabricating lightweight absorption-dominated EMI shielding materials.

A broadband and strong microwave absorption of Ti3C2Tx MXene/PPy composites with a core-shell structure

Electrostatic Adsorption Enables Layer Stacking Thickness-Dependent Hollow Ti3 C2 Tx MXene Bowls for Superior Electromagnetic Wave Absorption.

High-performance electromagnetic wave absorption by two-dimensional mesoporous monolayer Ti3C2Tx MXene

Broadband High-Performance Microwave Absorption of the Single-Layer Ti3C2Tx MXene

Ultralight, Conductive Ti3C2Tx MXene/PEDOT:PSS Hybrid Aerogels for Electromagnetic Interference Shielding Dominated by the Absorption Mechanism

Dielectric properties and electromagnetic simulation of molybdenum disulfide and ferric oxide-modified Ti3C2TX MXene hetero-structure for potential microwave absorption

3D Ti3C2Tx MXene/C Hybrid Foam/epoxy Nanocomposites with Superior Electromagnetic Interference Shielding Performances and Robust Mechanical Properties

Modulation of Multifunctional Electric Dipoles on MXenes for Boosting Electromagnetic Interference Shielding

Ti3C2Tx MXene/polyaniline (PANI) sandwich intercalation structure composites constructed for microwave absorption

Synthesis of CuS Nanoparticles Decorated Ti3C2Tx MXene with Enhanced Microwave Absorption Performance

2D Ti3C2T MXene/MOFs composites derived CoNi bimetallic nanoparticles for enhanced microwave absorption

Ti3C2Tx/Co-MOF derived TiO2/Co/C composites for broadband and high absorption of electromagnetic wave

0D/1D/2D architectural Co@C/MXene composite for boosting microwave attenuation performance in 2–18 GHz

Fabrication of S-doped Ti3C2Tx materials with enhanced electromagnetic wave absorbing properties

MXene-based accordion 2D hybrid structure with Co9S8/C/Ti3C2Tx as efficient electromagnetic wave absorber

Tailoring permittivity and permeability of M-type hexagonal ferrite and 2D Ti3C2Tx MXene composites for broadband microwave stealth performance

CeO2/Ti3C2Tx MXene Nanostructures for Microwave Absorption

Facile Preparation of Ti 3 C 2 T x MXene@Zn–Mn Ferrite Composites with Enhanced Microwave Absorption Performance

Ti3C2Tx/Co-BTC derived multidimensional hierarchical Co@NC/TiO2/C nanocomposites with efficient microwave absorption

Facile Preparation of Ti3c2tx Mxene @Zn-Mn Ferrite Composites and Their Excellent Microwave Absorption Performance

Synthesis and Microwave Absorption of Ti3C2Tx MXene with Diverse Reactant Concentration, Reaction Time, and Reaction Temperature