Abstract:In order to investigate the impact of freeze–thaw damage on sandstone under the coupling of ground stress and pore water pressure, three types of porous sandstone were subjected to freezing at different negative temperatures (−5 °C, −10 °C, −15 °C, and −20 °C). Subsequently, hydraulic coupling triaxial compression tests were conducted on the frozen and thawed sandstone. We analyzed the effects of porosity and freezing temperature on the mechanical properties of sandstone under hydraulic coupling and performed nuclear magnetic resonance tests on sandstone samples before and after freezing and thawing. The evolution of the pore structure in sandstone at various freezing and thawing stages was studied, and a statistical damage constitutive model was established to validate the test results. The results indicate that the stress–strain curves of sandstone samples under triaxial compression after a freeze–thaw cycle exhibit minimal changes compared to those without freezing at normal temperature. The peak deviator stress shows a decreasing trend with decreasing freezing temperature, particularly between −5 °C and −10 °C, and then gradually stabilizes. The elastic modulus of sandstone with different porosity decreases with the decrease in freezing temperature, and the decrease is more obvious in the range of −5 °C~−10 °C, decreasing by 2.33%, 6.11%, and 10.5%, respectively. Below −10 °C, the elastic modulus becomes similar to that at −10 °C, and the change tends to stabilize. The nuclear magnetic porosity of sandstone samples significantly increases after freezing and thawing. The smaller the initial porosity, the greater the rate of change in nuclear magnetic porosity after a freeze–thaw cycle. The effects of freeze–thaw damage on the T2 distribution of sandstone with different porosity levels vary. We established a statistical damage constitutive model considering the combined effects of freeze–thaw damage, ground stress, and pore water pressure. The compaction coefficient K was introduced into the constitutive model for optimization. The change trend of the theoretical curve closely aligns with that of the test curve, better characterizing the stress–strain relationship of sandstone under complex pressure environments. The research findings can provide a scientific basis for wellbore wall design and subsequent maintenance in complex environments.

Experimental study on ultrasonic characteristics of frozen sandstone under uniaxial compression

Energy evolution and macro-micro failure mechanisms of frozen weakly cemented sandstone under uniaxial cyclic loading and unloading

Experimental study on AE response and damage evolution characteristics of frozen sandstone under uniaxial compression

Effects of ice content on compression characteristics of frozen sandstone by in-situ NMR technology

Hysteresis in the ultrasonic parameters of saturated sandstone during freezing and thawing and correlations with unfrozen water content

Damage Evolution and Acoustic Emission Characteristics of Sandstone under Freeze-Thaw Cycles

Effect of freeze–thaw cycle on physical and mechanical properties and damage characteristics of sandstone

Experimental Study of the Mechanical and Acoustic Emission Characteristics of Sandstone by Using High-Temperature Water-Cooling Cycles

Experimental study of creep properties of quartz sandstone after freezing-thawing cycles

Study on a Damage Model and Uniaxial Compression Simulation Method of Frozen–Thawed Rock

Effects of Water and Cyclic Loading on Ultrasonic and Mechanical Properties of Sandstone: An Experimental Study

Study on the Failure Process and Acoustic Emission Characteristics of Freeze–Thawed Sandstone under Cyclic Loading and Unloading

Mechanical Properties and Damage Constitutive Model of Saturated Sandstone Under Freeze–Thaw Action

An experimental study on the influence of ice saturation and sub-zero temperatures on the dynamic mechanical properties of sandstones

Dynamic tensile mechanical properties of water-saturated and frozen sandstone after freeze-thaw fatigue damage treatment

The influence of saturation and loading angle on sandstone damage characteristics after freeze-thaw cycle

Ultrasonic time-frequency method to evaluate the deterioration properties of rock suffered from freeze-thaw weathering

Quantitative Study of the Failure Characteristics of Sandstone with Freeze–Thaw Damage: Insight into the Cracking Behavior

Study on the pore structure characteristics and damage constitutive model of sandstone under freeze-thaw conditions

Detecting freeze–thaw damage degradation of sandstone with initial damage using NMR technology

Experimental Study on Dynamic and Static Combined Dynamics of Temperature–Water-Coupled Sandstone and Energy Consumption Analysis