Abstract:<p>Compliant mechanisms with multiple inputs and multiple outputs have a wide range of applications in precision mechanics, e.g., cell manipulations, electronic microscopes, and etc. The movement uncoupling and maximum desired output displacements among these devices all become critical because many inputs and outputs are involved. The topology optimization design of compliant mechanisms, which can solve output coupling and input coupling problems, hinge and gray region problems, and the multiple objective optimal problem, is an important topic of researches for achieving fully decoupled motion. It is also a challenge area of research due to serious conflicts of between the four of output and input uncoupling constraints, volume constraint, the hinge‐free requirement, and the good black/white solution requirement. In order to comprehensively solve these problems, a simple optimization model overcoming these serious conflicts is posed, which includes small change rate constraints of structural compliances corresponding to the driving input loads and output point virtual loads. Then, the multiple output displacement functions of the model are equivalently converted into non‐negative functions. The multiple objective model is converted into a single‐objective optimization model by using a bound variable. The MMA (Method of Moving Asymptotes) algorithm is adopted to solve it. Several examples are presented to demonstrate the validity of the proposed method.</p>

A constraint-flow based method of synthesizing XYθ compliant parallel mechanisms with decoupled motion and actuation characteristics

A constraint-flow based method of synthesizing XY? compliant parallel mechanisms with decoupled motion and actuation characteristics

Type synthesis approach for the 2R1T compliant parallel mechanism with a suitable constrained branch

Synthesis and modelling of one rotational constraint orientated compliant mechanisms

Design, modeling, analysis and testing of a novel piezo-actuated XY compliant mechanism for large workspace nano-positioning

Topology optimization of a spatial compliant parallel mechanism based on constant motion transmission characteristic matrix

Structure synthesis of 3-DOF translational parallel mechanisms with configurable platform of translation

Compliant Mechanism Synthesis Using Nonlinear Elastic Topology Optimization with Variable Boundary Conditions

Systematic Design Method And Experimental Validation Of A 2-Dof Compliant Parallel Mechanism With Excellent Input And Output Decoupling Performances

The Design and Kinetostatic Modeling of 3PPR Planar Compliant Parallel Mechanism Based on Compliance Matrix Method.

Nonlinear synthesis of compliant mechanisms with selective compliance

Task-driven geometric synthesis method of a bistable compliant mechanism for the rigid guidance problem

Synthesis of One DOF Single-Loop Mechanisms with Prismatic Pairs Based on the Atlas Method

Computational synthesis of large deformation compliant mechanisms undergoing self and mutual contact

Type Synthesis Method for Parallel Robots With Special Topologies

Design of compliant mechanisms: An explicit topology optimization method using end-constrained spline curves with variable width

A new method for optimizing the topology of hinge‐free and fully decoupled compliant mechanisms with multiple inputs and multiple outputs

Type synthesis of a new parallel mechanism with complete separation of constraints and drives

Design and Analysis of a 3-DOF Planar Flexure-based Parallel Mechanism with Large Motion Range

A novel compliance modeling method for compliant parallel mechanisms and its application