Abstract:The swift industrialization and urbanisation have led to the discharge of significant amounts of hazardous heavy metals into water environments. Heavy metal pollution is currently one of the most significant environmental challenges being addressed, attracting researchers due to its biotoxicity, and non-biodegradability even at minimal concentrations [1]. Chromium (Cr) is among the most prevalent heavy metal contaminants. Its oxidation state, Cr(VI), harms the environment yet has catastrophic consequences for human health [2]. It is removed by physical and chemical procedures such as ion exchange, chemical precipitation and electrochemical treatment. Yet, most of these procedures have downsides, such as the formation of hazardous sludge, causing disposal issues and the need for costly tools and monitoring systems [3]. Adsorption is regarded an appealing and favourable technology because to its ease of design, simplicity, and high efficiency. Carbon-based nanomaterials have been investigated as superior adsorbents in aqueous solutions for the separation of organic and inorganic contaminants. The current study recommends the usage of adsorbents based on graphene oxide (GO). GO is an oxygen-rich material that is produced during the oxidation of graphite. It features hydrophobic areas due to aromatic groups in the nanosheets' centres, along with a large number of hydrophilic functional groups such as hydroxy, aldehyde, epoxy, and carboxyl groups [4]. The latter allow GO to swell and perform electrostatic functions. Chitosan (Cs) is a great adsorbent since it is inexpensive, is biocompatible, and causes no secondary pollution. Its molecular chains include -NH2 and -OH groups, which can interact with heavy metal ions and give significant adsorption capacity [5]. Silicon dioxide (SiO2) nanoparticles with graphene oxide have better physical and chemical characteristics than graphene oxide-like surface area. Similar research has revealed that the presence of SiO2 increases the adsorbent's adsorption capacity for Cr(VI) [6]. The effect of the pH value, contact time and initial chromium concentration was examined in order to determine the feasibility of Cs/GO@SiO2. Its structure and the morphology were studied in detail by the application of BET, XRD, FTIR and SEM techniques. According to the results, the modification of Cs with GO@SiO2 enhanced the percentage removal of chromium ions, especially, in acidic conditions by using 0.5 g/L of the adsorbent. Experimental data of equilibrium were used to calculate adsorption isotherms. According to thermodynamics the spontaneous nature of their adsorption was confirmed. Overall, the results indicate that Cs/GO@SiO2 can be effectively employed for removal of chromium from aqueous solutions.

Experimental and computational studies of crystal violet removal from aqueous solution using sulfonated graphene oxide

Enhancing Graphene Oxide Production and Its Efficacy in Adsorbing Crystal Violet: An In‐Depth Study of Thermodynamics, Kinetics, and DFT Analysis

Graphene oxide functionalized with L-asparagine applied to crystal violet dye removal from water and wastewater

Graphene Oxide Cross-Linked Chitosan Nanocomposite Adsorbents for the Removal of Cr (VI) from Aqueous Environments

Structural Properties of Graphene Oxide Prepared from Graphite by Three Different Methods and the Effect on Removal of Cr(VI) from Aqueous Solution

Adsorptive Removal of Ciprofloxacin by Sodium Alginate/graphene Oxide Composite Beads from Aqueous Solution.

Removal of Crystal Violet by Using Reduced-Graphene-Oxide-Supported Bimetallic Fe/Ni Nanoparticles (rGO/Fe/Ni): Application of Artificial Intelligence Modeling for the Optimization Process

Recycled gold-reduced graphene oxide nanocomposite for efficient adsorption and photocatalytic degradation of crystal violet

Synthesis of graphene oxide–magnesium oxide composites and cationic dyes removal from water

Synthesis of Chitosan Graft Poly (acrylic Acid-Co-2-acrylamide-2-methylpropanesulfonic Acid)/graphite Oxide Composite Hydrogel and the Study of Its Adsorption

Removal of drug and dye from aqueous solutions by graphene oxide: Adsorption studies and chemometrics methods

Synthesis of Amino-Engineered Graphene Oxidize Nanocomposite (GO/SBA-15) for Potential Copper Ions and Dye Removal from Aqueous Solution

Effective Removal of Cr(VI) from Aqueous Solution by 3-Aminopropyltriethoxysilane-functionalized Graphene Oxide

Study on Preparation of Chitosan/Polyvinyl Alcohol Aerogel with Graphene−Intercalated Attapulgite(GO−ATP@CS−PVA) and Adsorption Properties of Crystal Violet Dye

Complex Roles of Solution Chemistry on Graphene Oxide Coagulation onto Titanium Dioxide: Batch Experiments, Spectroscopy Analysis and Theoretical Calculation

Sodium Docusate Surface-Modified Dispersible and Powder Zinc Peroxide Formulation: An Adsorbent for the Effective and Fast Removal of Crystal Violet Dye, an Emerging Wastewater Contaminant

Surface Modified Laterite Soil with an Anionic Surfactant for the Removal of a Cationic Dye (Crystal Violet) from an Aqueous Solution

Chitosan/Graphene oxide/SiO2 Nanoadsorbents for the Removal of Cr(VI) from Wastewaters

Photocatalytic degradation of crystal violet on titanium dioxide/graphene aerogel doped sulfur

Insights into the Synthesis of Monolithic and Structured Graphene Bulks and Its Application for Cu2+ Ions Removal from Aqueous Solution

Removal of crystal violet dye with an innovative biosorbent (equisetum ramosissimum desf.)