Abstract:Spatial heterodyne Raman spectrometers (SHRSs) are modified forms of Michelson interferometers, except the mirrors in a Michelson interferometer are replaced with stationary diffraction gratings. This design removes the need for an entrance slit, as is the case in a dispersive spectrometer, and removes the need to scan the spectrum by using a moving mirror in a modern Michelson interferometer. In previous studies, various SHRS variants, such as free-standing two-grating SHRS, single-grating SHRS (1g-SHRS), monolithic SHRS (mSHRS), and single-grating mSHRS (1g-mSHRS), have been evaluated. However, the present study exclusively focuses on the 1g-mSHRS configuration. The 1g-mSHRS and 1g-SHRS increase the spectral range at fixed grating line density while trading off spectral resolution and resolving power. The mSHRS benefits from increased rigidity, lack of moving parts, and reduced footprint. In this study, we investigate how the choice of detector impacts the performance of the 1g-mSHRS system, with a specific focus on evaluating the performance of three types of cameras: charged-coupled device (CCD), intensified CCD (ICCD), and complementary metal–oxide–semiconductor (CMOS) cameras. These systems were evaluated using geological, organic, and inorganic samples using a 532 nm continuous wave laser for the CMOS and CCD cameras, and a 532 nm neodymium-doped yttrium aluminum garnet pulsed laser for the ICCD camera. The footprint of the 1g-mSHRS was 3.5 × 3.5 × 2.5 cm3 with a mass of 272 g or 80 g, depending on whether the monolith housing is included or not. We found that increasing the number of pixels utilized along the x-axis of the camera increases fringe visibility (FV) and optimizes the resolution (by capturing the entirety of the grating and magnifying the fringes). The number of pixels utilized in the y-axis, chip size, and dimensions, affect the signal-to-noise ratio of the systems. Additionally, we discuss the effect of pixel pitch on the recovery of Fizeau fringes, including the relationship between the Nyquist frequency, aliasing, and FV.

Theoretical analysis of multi-grating-based cross-dispersed spatial heterodyne spectrometer

Design of Compact Wide-Band Triple Grating Imaging Spectrometer Based on Freeform Surfaces

Design and theoretical analysis of a conical-diffraction-based cross-dispersed spatial heterodyne spectrometer

Design of Large-Deflection-angle High-Diffraction-efficiency High-Dispersion Hybrid Gratings

Broad-band spatial heterodyne interferometric spectrometer

Direct Design Method for Holographic Grating Imaging Spectrometer and Corresponding Recording System

Optical Design of Imaging System Based on Spatial Heterodyne Spectrometer

Development of a high-resolution, broadband spatial heterodyne Raman spectrometer based on field-widened grating-echelle structure

An Ultrahigh-Resolution Spectrometer Using Parallel Double Gratings

Data Processing for Interferogram of Spatial Heterodyne Spectrometer

Compact High-Resolution Spectrometer Using Two Plane Gratings with Triple Dispersion

An improved method for optical system design and optimization of double grating spectrometer

A new spectrometer using multiple gratings with a two-dimensional charge-coupled diode array detector

Experimental study on spatial heterodyne spectroscopy

Development of the two-dimensional spectrum-folded spectrometer

A Design Method for Direct Vision Coaxial Linear Dispersion Spectrometers

Research on the Technology of Alternative Continuous Wide Spectral Spatial Heterodyne Spectrometer

Design of orthogonal tunable spatial heterodyne spectrometer based on prism dispersion

Study for the Dispersion of Double-Diffraction Spectrometers

High dynamic range spatial heterodyne one-dimensional imaging spectroscopy based on a digital micromirror device

Single-Grating Monolithic Spatial Heterodyne Raman Spectrometer: An Investigation on the Effects of Detector Selection