Abstract:3D printing has shown promise in the development of notable sensing and health detection devices. Nonetheless, challenges remain in the concurrent development of highly durable wearable sensors with low-friction surfaces. This challenge serves as a limiting factor in the operational lifespans of these sensors. In this study, a magnetically assisted 3D printing technique is developed to fabricate composites reinforced with magnetic Fe3O4@SiO2 nanochains (NCs) with dimensions of 60.2 mu m in length (L) and 0.2 mu m in diameter (D), indicating an L:D ratio exceeding 300. By applying a vertical magnetic field and extrusion flow field to the sensor's surface layer, the NCs can be arranged differently (together with the printed textures), reducing the coefficient of friction by 27.7% and improving the wear resistance. This approach is inspired by nacre, known for its impressive durability and resilience. A motion monitoring sensor with an extended lifespan is successfully fabricated by using liquid metal ink integrated with an anti-wear layer. These findings offer significant insights into the evolution of wearable sensors, demonstrating their adaptability to multi-material printing and resulting in improved performance and service lives. This work introduces a magnetically assisted 3D printing method using Fe3O4@SiO2 nano chains for enhanced wear resistance. Applying a magnetic field alters nanochain alignment, thereby reducing friction and improving durability. The results of this research can be considered to highlight advancements in developing adaptable, multimaterial printed flexible sensors with improved service life and performance. image

3D Printable Self‐Sensing Magnetorheological Elastomer

Self-healing and printable elastomer with excellent shear stiffening and magnetorheological properties

The Conductive Three Dimensional Topological Structure Enhanced Magnetorheological Elastomer Towards a Strain Sensor

Combined Magnetic and Mechanical Sensing of Magnetorheological Elastomers

Development of a Compliant Magnetic 3-D Tactile Sensor with AMR Elements.

A 3D‐Printed Ferromagnetic Liquid Crystal Elastomer with Programmed Dual‐Anisotropy and Multi‐Responsiveness (Adv. Mater. 45/2023)

Dual-modulus 3D printing technology for magnetorheological metamaterials-part I: Manufacturing and performance

Performance Tests on New Developed High Damping Magnetorheological Elastomers

Conductive Magnetorheological Fluid (Cmrf)-Based Flexible Sensor with Adjustable Stiffness for Magneto-Mechanical Dual-Response and Soft Actuator

Magnetically Assisted 3D Printing of Ultra‐Antiwear Flexible Sensor

Printable anisotropic magnetoresistance sensors for highly compliant electronics

Investigation of Macroscopic Mechanical Behavior of Magnetorheological Elastomers under Shear Deformation Using Microscale Representative Volume Element Approach

Versatile Magnetorheological Plastomer with 3D Printability, Switchable Mechanics, Shape Memory, and Self-Healing Capacity

Study on a New Self-Sensing Magnetorheological Elastomer Bearing

Magnetorheological Elastomers: Fabrication, Characteristics, and Applications

Investigation on Magnetorheological Effect of Novel Self-healing Magnetorheological Elastomers

A shape-deformable liquid-metal-filled magnetorheological plastomer sensor with a magnetic field “on-off” switch

On The Sensing Of Magnetorheological Elastomers

Elastic Properties of Magnetorheological Elastomers in a Heterogeneous Uniaxial Magnetic Field

Electrical Properties of Magneto-Rheological Elastomers

Properties, materials, fabrication and characterization of magneto-sensitive elastomers: detailed state of the art