Abstract:To meet the application needs of rechargeable Zn–air battery and electrocatalytic overall water splitting (EOWS), developing high-efficiency, cost-effective, and durable trifunctional catalysts for the hydrogen evolution reaction (HER), oxygen evolution, and reduction reaction (OER and ORR) is extremely paramount yet challenging. Herein, the interface engineering concept and nanoscale hollowing design were proposed to fabricate N-doping carbon nanoboxes confined with Co/MoC nanoparticles. Uniform zeolitic imidazolate framework nanocube was employed as the starting material to construct the trifunctional electrocatalyst through the conformal polydopamine–Mo layer coating and the subsequent pyrolysis treatment. The / catalyst displayed superior electrochemical ORR performances with a positive half-wave potential of 0.875 V and a high limiting current density of 5.89 mA/cm2. When practically employed as an electrocatalyst in regenerative Zn–air battery, a high specific capacity of 728 mAh/g, a large peak power density of 221 mW/cm2, a high open-circuit voltage of 1.482 V, and a low charge/discharge voltage gap of 0.41 V were obtained. Moreover, its practicability was further exploited by overall water splitting, affording low overpotentials of 277 and 68 mV at 10 mA/cm2 for the OER and HER in 1 M KOH solution, respectively, and a decent operating potential of 1.57 V for EOWS. Ultraviolet photoelectron spectroscopy and density functional theory calculation revealed that the Co/MoC interface synergistically facilitated the charge-transfer, thereby contributing to the enhancements of electrocatalytic ORR/OER/HER processes. More importantly, this catalyst design concept can offer some interesting prospects for the construction of outstanding trifunctional catalysts toward various energy conversion and storage devices.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsnano.1c03766.Experimental section; XRD patterns, photographs, EDS spectra, SEM and TEM images of different precursors; Raman and XPS spectra of various catalysts; schematic model; partial density of states and total density of states; ORR and OER polarization curves; methanol crossover tolerance for ORR; durability evaluation curves; digital image of the Zn–air button battery; reduction peaks; linear fitting; amounts of H2 and O2 experimentally measured and theoretically calculated; SEM images and HRXPS spectra after OER and HER; summaries of electrochemical performances (PDF)Movie S1 of HER performance of / product (MP4)Movie S2 of OER performance of / product (MP4)Movie S3 of EOWS performance of / product (MP4)This article has not yet been cited by other publications.

Trifunctional Self‐Supporting Cobalt‐Embedded Carbon Nanotube Films for ORR, OER, and HER Triggered by Solid Diffusion from Bulk Metal

Integrating a Metal Framework with Co-confined Carbon Nanotubes As Trifunctional Electrocatalysts to Boost Electron and Mass Transfer Approaching Practical Applications

Isolated Transition Metal Nanoparticles Anchored on N-doped Carbon Nanotubes As Scalable Bifunctional Electrocatalysts for Efficient Zn–air Batteries

A Freestanding 3D Heterostructure Film Stitched by MOF‐Derived Carbon Nanotube Microsphere Superstructure and Reduced Graphene Oxide Sheets: A Superior Multifunctional Electrode for Overall Water Splitting and Zn–Air Batteries

1D/3D Heterogeneous Assembling Body as Trifunctional Electrocatalysts Enabling Zinc–Air Battery and Self‐Powered Overall Water Splitting

Nitrogen and cobalt co-doped carbon nanotube films as binder-free trifunctional electrode for flexible zinc-air battery and self-powered overall water splitting

Carbon nanotube-encapsulated Co/Co3Fe7 heterojunctions as a highly-efficient bifunctional electrocatalyst for rechargeable zinc-air batteries

Highly-dispersed cobalt clusters decorated onto nitrogen-doped carbon nanotubes as multifunctional electrocatalysts for OER, HER and ORR

Co-Co 6 Mo 6 C 2 heterostructure grown on carbon nanofibers as tri-functional electrocatalyst for overall water splitting and rechargeable Zn-air batteries

Engineering Non-precious Trifunctional Cobalt-Based Electrocatalysts for Industrial Water Splitting and Ultra-High-Temperature Flexible Zinc-Air Battery

High-Performance Trifunctional Electrocatalysts Based on FeCo/Co2P Hybrid Nanoparticles for Zinc-Air Battery and Self-Powered Overall Water Splitting

Hierarchical 3D macrosheets composed of interconnected in situ cobalt catalyzed nitrogen doped carbon nanotubes as superior bifunctional oxygen electrocatalysts for rechargeable Zn–air batteries

Architecting N-doped Carbon Nanotube-Rich Carbon Nanofibers with Biomimetic Vine-Leaf-Whisker Structure as Robust Bifunctional Electrocatalysts for Rechargeable Zn-Air Batteries

Encapsulating CoNi nanoparticles into nitrogen-doped carbon nanotube arrays as bifunctional oxygen electrocatalyst for rechargeable zinc-air batteries

Self-Catalyzed Growth Of Co, N-Codoped Cnts On Carbon-Encased Cosx Surface: A Noble-Metal-Free Bifunctional Oxygen Electrocatalyst For Flexible Solid Zn-Air Batteries

Formation of mesoporous Co/CoS/Metal-N-C@S, N-codoped hairy carbon polyhedrons as an efficient trifunctional electrocatalyst for Zn-air batteries and water splitting

Trifunctional catalyst of FeCo,N-doped mixed-dimensional carbon for the high-performance zinc-air flow battery

Constructing FeNiPt@C Trifunctional Catalyst by High Spin‐Induced Water Oxidation Activity for Zn‐Air Battery and Anion Exchange Membrane Water Electrolyzer

Ultralong nitrogen/sulfur Co‐doped carbon nano‐hollow‐sphere chains with encapsulated cobalt nanoparticles for highly efficient oxygen electrocatalysis

Trifunctional electrocatalysts based on a bimetallic nanoalloy and nitrogen-doped carbon with brush-like heterostructure

Co/MoC Nanoparticles Embedded in Carbon Nanoboxes as Robust Trifunctional Electrocatalysts for a Zn–Air Battery and Water Electrocatalysis