Abstract:Despite the non-contact underwater explosion phenomena (UNDEX) have been studied for decades and several numerical methods have been proposed in literature, its effects on military structures, especially composite ones, are even nowadays matter of research. In early design phases, it is not always possible to verify the shock resistance of hull structures modelling the whole phenomenon, in which fluid, gas and solid properties must be properly set in a fully coupled fluid-structure interaction (FSI) numerical model. These ones are extremely complex to set, computationally demanding and certainly not suitable for everyday design practice. In this paper, a simplified finite element (FE) model, easy to use in an early design phase, is proposed. Both, the structure and the fluid are simulated. In this approximation, the fluid behaviour is simplified, using special finite elements, available in a commercial software environment. This choice reduces the computational time and numerical efforts avoiding the problem of combining computational fluid dynamics (CFD) and FE domains and equations in a fully coupled fluid-structure interaction model. A typical parallel body block of a minesweeper is modelled, using two-dimensional multi-layered shell elements to properly account for the composite materials behaviour. For the fluid instead, three dimensional volumetric elements, directly coupled to the structural elements, are placed. In addition, the same calculation is performed, modelling separately fluid in the CFD environment and structures in the finite element one. Thus, realizing a fully coupled fluid-structure interaction model. The results obtained by applying both numerical models are compared with the structural response measured on board of a composite ship during a full-scale shock test. The simplified proposed procedure provides results in satisfactory agreement with experiments, allowing the validation of the model. Approximations are discussed and differences with the real phenomenon and fully coupled CFD+FE method are shown, providing a better understanding of the phenomena. Eventually, the modelling strategy has been considered a valuable and cost-effective tool for the concept and preliminary design of composite structures subject to underwater explosions.

Predicting the near field underwater explosion response of coated composite cylinders using multiscale simulations, experiments, and machine learning

Probabilistic Machine Leaning Models for Predicting the Maximum Displacements of Concrete-Filled Steel Tubular Columns Subjected to Lateral Impact Loading

Predictions of the responses of stiffened plates subjected to underwater explosion based on machine learning

Applying machine learning techniques to predict the properties of energetic materials

Improved deep neural network for predicting structural response of stiffened cylindrical shells to far-field underwater explosion

Deep learning for energetic material detonation performance

Damage prediction of stiffened plates subjected to underwater contact explosion using the machine learning-based method

Prediction of Ductile Damage in Composite Material Used in Type IV Hydrogen Tanks by Artificial Neural Network and Machine Learning with Finite Element Modeling Approach

LS-DYNA Machine Learning-based Multiscale Method for Nonlinear Modeling of Short Fiber-Reinforced Composites

Deep learning-based prediction of structural responses of RC slabs subjected to blast loading

A machine learning assisted multifidelity modelling methodology to predict 3D stresses in the vicinity of design features in composite structures

Piezo resistance response prediction in multifunctional hybrid composites under dynamic loading conditions using machine learning methods

A machine learning accelerated inverse design of underwater acoustic polyurethane coatings with cylindrical voids

Accurate Prediction of Microstructure of Composites using Machine Learning

Machine Learning of Energetic Material Properties

Experimental and Numerical Investigation Integrated with Machine Learning (ML) for the Prediction Strategy of DP590/CFRP Composite Laminates

Machine learning for naval architecture, ocean and marine engineering

Predicting the Strength of Composites with Computer Vision Using Small Experimental Datasets

Physics-informed machine learning approach for molten pool morphology prediction and process evaluation in directed energy deposition of 12CrNi2 alloy steel

A Design Approach to Assess Effects of Non-Contact Underwater Explosions on Naval Composite Vessels

The intersection of damage evaluation of fiber-reinforced composite materials with machine learning: A review