Abstract:This study characterized and modeled heterogeneous surface wettability in sandstone and investigated the role of spatial heterogeneity and correlation length of surface wettability on relative permeability in a supercritical CO2 (scCO(2))-brine-rock system. Understanding the role of wettability heterogeneity on relative permeability is essential to geological CO2 sequestration, oil and gas recovery, and contaminated groundwater remediation. Although numerous studies have attempted to understand the influences of surface wettability, capillary number (Ca), and viscosity ratio, the role of the spatial variation and correlation length of surface wettability on two-phase flow in three-dimensional (3D) porous media has not been unraveled due to the challenges in the measurement and representation of realistic rock surface wettability. In this work, we conducted in-situ measurements of surface contact angle (CA) in a Bentheimer sandstone after CO2 flooding using micro-computed tomography (micro-CT), and found that the pore-scale CA distribution on rock surfaces followed a log-normal distribution associated with a spatial correlation length. Based on the statistical information from CT scanning, a Gaussian random field was used to model CA distributions that had desired standard deviations and spatial correlation lengths, which were then adjusted within a certain range of values for sensitivity analyses to study their combined effects on the two-phase flow in the porous medium using the lattice Boltzmann (LB) method. The LB two-phase flow simulation was accelerated using hybrid, multicore parallel computing to overcome the challenges in simulating multiphase flow in a large 3D domain having 800 x 800 x 600 nodes. The simulation results showed that the surface wettability heterogeneity (i.e., standard deviation of CA) had a lesser effect on the relative permeability of the wetting fluid (water) but a more significant impact on the relative permeability of the non-wetting fluid (scCO(2)). The Corey model was used to fit the LB-simulated relative permeability curves of water and scCO(2) and showed that the variations in the relative permeability curves for both water and scCO(2) increased as the standard deviation and spatial correlation length of CA increased. This study illustrated that the assumption of homogeneous surface wettability may cause errors in multiphase flow simulations. The impacts of both the standard deviation and spatial correlation length of CAs should be accounted for. This is the first study that explored the spatial correlation lengths associated with CA distributions on sandstone surfaces and comprehensively investigated the roles of both spatial variation and correlation length of CA on two-phase flow properties in 3D porous media. The optimized LB multiphase flow model was proved a powerful tool to study the interplays and combined effects of these statistical parameters, which had critical applications in numerous natural and engineering processes that involved multiphase flow in porous media.

An extension of gases-brine mutual solubility models to include geochemical reactions: Modeling and applications

Modelling of the Phase-Partitioning Behaviors for CO2-Brine System at Geological Conditions

A simple model for the prediction of mutual solubility in CO2-brine system at geological conditions

Using Reaktoro for mineral and gas solubility calculations with the Extended UNIQUAC model

The Role of the Spatial Heterogeneity and Correlation Length of Surface Wettability on Two-Phase Flow in a CO2-water-rock System

Thermodynamic Modeling of Mutual Solubilities in Gas-Laden Brines Systems Containing CO2, CH4, N2, O2, H2, H2O, NaCl, CaCl2, and KCl: Application to Degassing in Geothermal Processes

A State-Dependent Constitutive Model for Coarse-Grained Gassy Soil and Its Application in Slope Instability Modelling

Predicting CO2 and H2 Solubility in Pure Water and Various Aqueous Systems: Implication for CO2–EOR, Carbon Capture and Sequestration, Natural Hydrogen Production and Underground Hydrogen Storage

A Fully Coupled Hydro-Mechanical-Gas Model Based on Mixture Coupling Theory

A review of interaction mechanisms and microscopic simulation methods for CO 2 -water-rock system

A dual porosity model of high-pressure gas flow for geoenergy applications

Multiphase Reactive Transport Modeling – the Impacts of Two-Phase Flow on Mineral Reaction Rate

A constitutive model for predicting the solubility of gases in water at high temperature and pressure

Simulating the Fate and Transport of Coal Seam Gas Chemicals in Variably-Saturated Soils Using HYDRUS

A mineral-water-gas interaction model of pCO2 as a function of temperature in sedimentary basins

Analyzing the Dynamics of Mineral Dissolution during Acid Fracturing by Pore-Scale Modeling of Acid-Rock Interaction

Prediction of the Solubility and Gas-Liquid Equilibria for Gas-Water and Light Hydrocarbonwater Systems at High Temperatures and Pressures with a Group Contribution Equation of State

Pore-scale simulation of multicomponent multiphase reactive transport with dissolution and precipitation

Simulations of CO2 Dissolution in Porous Media Using the Volume-of-Fluid Method

A Model on Assessing Effects of Gas Diffusion in Multifield Coupled Process for Unsaturated Soils