Research on precision automatic tool setting technology for KDP crystal surface damage mitigation based on machine vision

Linjie Zhao,Jian Cheng,Zhaoyang Yin,Hao Yang,Mingjun Chen,Xiaodong Yuan

DOI: https://doi.org/10.1016/j.jmapro.2021.02.012

IF: 5.684

2021-04-01

Journal of Manufacturing Processes

Abstract:<p>Up to now, micro milling has been recognized as the most promising technique to mitigate the surface damage of large-aperture KDP crystal used in laser fusion facility. However, there are quantities of damages on the surface of large-aperture KDP crystal to be mitigated. Furthermore, the efficiency and accuracy of manual tool setting is relatively low, and it is easy to damage KDP crystal surface due to mis-operation. Therefore, an automatic tool setting technology for KDP crystal surface damage mitigation based on machine vision is proposed in this research. The automatic tool setting includes fast pre tool setting achieved by image ranging and final tool setting achieved by micro-chip detection. In the process of fast pre tool setting, real-time image of the micro milling cutter is obtained, and the distance between the tool tip and the KDP crystal surface is obtained by image ranging. Finally, the tool tip is quickly positioned 20 μm away from the KDP crystal surface. In the process of final tool setting, the micro milling cutter is retreated to a distance of about 50 μm away from the KDP crystal surface before detecting micro-chips. Therefore, the micro-chips covered by the micro milling cutter will be exposed and appear in the view field of microscope, so as to improve the micro-chip recognition rate. The results showed that the total time of automatic tool setting is 130 s, and the accuracy of automatic tool setting is better than 1.359 μm. Compared with manual tool setting, the automatic tool setting based on machine vision proposed in this research improves the safety, efficiency, and accuracy of independently developed mitigation system for KDP crystal surface damage.</p>

engineering, manufacturing

What problem does this paper attempt to address?

This paper aims to address the issue of surface damage on large-diameter KDP crystals. Specifically, the paper proposes an automatic tool alignment technology based on machine vision technology to improve the efficiency, accuracy, and safety of KDP crystal surface damage repair. Traditional manual tool alignment methods have problems of low efficiency and easy misoperation, which can lead to further damage to the crystal surface. Therefore, this study developed an automatic tool alignment system, including two stages: rapid pre-alignment and final alignment, utilizing image distance measurement and micro-chip detection technology to achieve precise alignment. Experimental results show that compared to manual tool alignment, this system can significantly improve the safety, efficiency, and accuracy of tool alignment, reducing the total alignment time to 130 seconds and achieving an alignment accuracy better than 1.359 micrometers. This helps to enhance the optical performance and service life of KDP crystals in laser nuclear fusion facilities.

Research on precision automatic tool setting technology for KDP crystal surface damage mitigation based on machine vision

A high-resolution detecting system based on machine vision for defects on large aperture and super-smooth surface

INTEGRATED TECHNOLOGY FOR DETECTION AND REPAIR OF MECHANICAL COMPONENT SURFACE FATIGUE MICROCRACKS USING PULSED LASER

Precision tool setting for fabrication of a microstructure array

Alignment Methods for Micron-Scale Surface Defects Automatic Evaluation of Large-Aperture Fine Optics

Surface defects evaluation system based on electromagnetic model simulation and inverse-recognition calibration method

Application of light diffraction theory to qualify the downstream light field modulation property of mitigated KDP crystals

On-machine detection of face milling cutter damage based on machine vision

Evolution of brittle-ductile transition and size effect in the micro-milling repairing process of soft-brittle KDP crystal with surface defect

On the Ultra-Precision Fabrication of Damage-Free Optical KDP Components: Mechanisms and Problems

Combining laser-induced fluorescence and light-scattering microscopies to diagnose low-fluence damage precursors on KDP-based crystal surface

Dynamic behavior modeling of laser-induced damage initiated by surface defects on KDP crystals under nanosecond laser irradiation

Width and Depth Gauging of Rectangular Subsurface Defects Based on All-Optical Laser-Ultrasonic Technology

Characterization of manufacturing-induced surface scratches and their effect on laser damage resistance performance of diamond fly-cut KDP crystal

Initial energy deposition and initiation mechanism of nanosecond laser damage caused by KDP surface micro-defects

The Influence of Planar Array Charge-coupled Device (CCD) Staggered Imaging on the Detection Precision of the Tool Setting Gap when Using Laser Diffraction

Laser damage evolution by defects on diamond fly-cutting KDP surfaces

Rapid Inspection System for Weak Feature Micro-Flaw on Large-Aperture Optics Surface Based on Multi-Illumination Modes and Multitask Learning Algorithms

Automatic evaluation system for bulk defects in optics

Visual high-precision detection method for tool damage based on visual feature migration and cutting edge reconstruction

Surface damage evolution of KDP crystals induced by conical cracks under irradiation of nanosecond laser