Abstract:Ion mobility-mass spectrometry (IM-MS) is a powerful analytical tool for structural characterization. IM measurement provides collision cross section (CCS) values that facilitate analyte identification. While CCS values can be directly calculated from mobility measurements obtained using drift tube ion mobility spectrometry (DT-IMS), this method has limited mobility resolution due to the practical constraints on the length of the ion drift path. Consequently, DT-IMS cannot differentiate analytes with similar mobilities or resolve fine mobility features of individual ions. Cyclic IMS (cIMS) instruments leverage a cyclic path enabled by traveling wave ion mobility (TWIM) technology and offer increased mobility solution to address this challenge. While TWIM devices must first be calibrated to enable CCS measurements, current calibration strategies are primarily tailored for single-pass analyses. This preference is partly attributed to the challenges associated with multi-pass calibration methods, which require both calibrants and analytes to experience the same number of passes. Achieving this consistency can be complicated due to factors like peak splitting and diffusion, and may not be feasible for on-line IM-MS analyses. A recent report employed average ion velocities obtained from multiple measurements under different separation pathlengths as a pathlength-independent metric for CCS calibration. However, the ability to exploit this averaging approach is limited by observed variation in ion drift time/velocity in these measurements. In this study, we introduce a novel calibration strategy designed for multi-pass cIMS analyses, directly targeting the root cause for the pathlength- and mobility-dependent variations in ion drift time. With this method, we demonstrate that CCS values derived from multi-pass measurements closely align with those obtained from single-pass analyses, with an average deviation of 0.1%. We apply this method to characterize four isomeric trisaccharides. Our approach not only results in excellent agreement between our measured cIMSCCS values and the reported DTCCS values, with an average difference of only 0.5%, but also allows us to effectively identify subtle mobility characteristics of each compound and determine their respective CCS values. This level of detail and accuracy was previously unattainable using DT-IMS or single-pass cIMS measurements. We developed an algorithm for reconstructing arrival time distribution in cases where wrap-around has resulted in peak splitting. Collectively, the new calibration strategy and the reconstruction procedure maintain reproducibility and precision in CCS measurements while largely eliminating the need for meticulous selection of separation times. We expect that our method will empower researchers to harness the high mobility resolution offered by multi-pass cIMS analyses without compromising the accuracy of CCS measurement, making it appropriate for straightforward use across a wide range of applications.

MOCCal: A Multiomic CCS Calibrator for Traveling Wave Ion Mobility Mass Spectrometry

[Ion Moblity Mass Spectrometry in Multi-omics Studies]

Accurate Collisional Cross Section Measurement by Multi-pass Cyclic Ion Mobility Spectrometry

Large-Scale Collision Cross-Section Profiling on a Traveling Wave Ion Mobility Mass Spectrometer

A Flexible, Modular Platform for Multidimensional Ion Mobility of Native-like Ions

Computational tools and algorithms for ion mobility spectrometry‐mass spectrometry

MobiLipid: A Tool for Enhancing CCS Quality Control of Ion Mobility-Mass Spectrometry Lipidomics by Internal Standardization

Amphitrite: A Program for Processing Travelling Wave Ion Mobility Mass Spectrometry Data

Developing Liquid Chromatography Ion Mobility Mass Spectometry Techniques

Benchmark Comparison for a Multi-Processing Ion Mobility Calculator in the Free Molecular Regime

Ion Mobility Separation Using a Dual-LIT Miniature Mass Spectrometer.

Squeezing of Ion Populations and Peaks in Traveling Wave Ion Mobility Separations and Structures for Lossless Ion Manipulations Using Compression Ratio Ion Mobility Programming.

Ion Mobility, Hydrogen/Deuterium Exchange, and Isotope Scrambling: Tools to Aid Compound Identification in 'Omics Mixtures

CCSfind: A tool for chemically informed LC‐IM‐MS database building

Ion Mobility Separations of Isomers Based Upon Long Path Length Structures for Lossless Ion Manipulations Combined with Mass Spectrometry.

CCSfind: A tool for chemically informed LC-IM-MS database building

Combining Fourier Transform Ion Mobility with Charge Detection Mass Spectrometry for the Analysis of Multimeric Protein Complexes

Ion Mobility Mass Spectrometry (IM-MS) for Structural Biology: Insights Gained by Measuring Mass, Charge, and Collision Cross Section

Development of a Platform for High-Resolution Ion Mobility Separations Coupled with Messenger Tagging Infrared Spectroscopy for High-Precision Structural Characterizations

A Multimodal SIMS/MALDI Mass Spectrometry Imaging Source with Secondary Electron Imaging Capabilities for Use with timsTOF Instruments

Drift tube ion mobility and four-dimensional molecular feature extraction enable data-independent tandem mass spectrometric 'omics' analysis without quadrupole selection.