Abstract:Electrochemical cells with aluminum (Al) as the active material offer the benefits of high energy density, low cost, and high safety. Although several research groups have assembled rechargeable Al//MxOy (M = Mn, V, etc) cells with 2 m aqueous Al trifluoromethanesulfonate as an electrolyte and demonstrated the importance of the artificial solid electrolyte interphase (ASEI) on the Al anode for realizing high rechargeable capacity, the reactions of the Al anode in such cells remain underexplored. Herein, we investigate the effects of the ASEI on the charge/discharge cycling stability and activity of Al cells with the abovementioned aqueous electrolyte and reveal that this interphase provides chloride anions to induce the corrosion of Al rather than to support the transportation of Al3+ ions during charge/discharge. Regardless of the ASEI presence/absence, the main reactions at the Al anode during charge/discharge cycling are identified as oxidation and gas evolution, which suggests that the reduction of Al in the employed electrolyte is irreversible. The simple introduction of chloride anions (e.g., 0.15 m NaCl) into the electrolyte is shown to allow the realization of an Al//MnO2 cell with superior performance (discharge working voltage ≈ 1.5 V and specific capacity = 250 mA h/g). Thus, the present work unveils the mechanisms of reactions occurring at the Al anode of aqueous electrolyte Al cells to support their further development.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsami.1c08782.Electrochemical performance of symmetric Al cells (and the related FTIR spectra), compatibility of various electrolytes to ILs, surface morphology of aluminum after various treatment conditions, influence of adding different acids and chloride salts to the electrolyte, electrochemical windows of different electrolytes, TEM analysis of the discharged α-MnO2 sample, CV curves of asymmetric batteries in different electrolytes, OCV curve of full cells, additional EIS data, and effect of cycling on electrolyte pH (PDF)Observation of gas evolution during charge/discharge cycling from Al symmetric cells (MP4)Observation of gas evolution during charge/discharge cycling from an Al//α-MnO2 cell using a 2 m Al(OTf)3 + 0.15 m NaCl aqueous electrolyte (MP4)This article has not yet been cited by other publications.

Amplifying the Differences in Aluminum‐Based Eutectic Electrolytes Through Electrodeposition on MXenes

Rational surface engineering of MXene@N-doped hollow carbon dual-confined cobalt sulfides/selenides for advanced aluminum batteries

Uniformly MXene‐Grafted Eutectic Aluminum‐Cerium Alloys as Flexible and Reversible Anode Materials for Rechargeable Aluminum‐Ion Battery

In-situ TEM Experiments and First-Principles Studies on the Electrochemical and Mechanical Behaviors of Α-Moo3 in Li-ion Batteries

Engineering Ternary Hydrated Eutectic Electrolytes to Realize Rechargeable Cathode-free Aluminum-ion Batteries

Nonflammable localized high-concentration deep eutectic electrolytes for safe and stable rechargeable aluminum batteries

Low-Temperature and High-Rate Rechargeable Aluminum Batteries Enabled by Ternary Eutectic Electrolytes

In Situ Synthesis of MoO3 by Surface Oxidation of Mo2C (MXene) for Stable Near-Surface Reactions in Aqueous Aluminum-Ion Battery

Effects of Multiple Ion Reactions based on a CoSe2/MXene Cathode in Aluminum‐Ion Batteries

In Situ Preparation of MXenes in Ambient-Temperature Organic Ionic Liquid Aluminum Batteries with Ultrastable Cycle Performance

In Situ Synthesis of MoO 3 by Surface Oxidation of Mo 2 C (MXene) for Stable Near‐Surface Reactions in Aqueous Aluminum‐Ion Battery

Modulating Aluminum Solvation with Ionic Liquids for Improved Aqueous-Based Aluminum-Ion Batteries

Adjustable MXene‐Based Materials in Metal‐Ion Batteries: Progress, Prospects, and Challenges

Understanding The Reversible Electrodeposition of Al in Low-Cost Room Temperature Molten Salts

Aqueous Aluminum Cells: Mechanisms of Aluminum Anode Reactions and Role of the Artificial Solid Electrolyte Interphase

Comparative Study of Guanidine-, Acetamidine- and Urea-Based Chloroaluminate Electrolytes for an Aluminum Battery

Locally Concentrated Deep Eutectic Liquids Electrolytes for Low-Polarization Aluminum Metal Batteries

Rechargeable Aluminum Batteries: Effects of Cations in Ionic Liquid Electrolytes

Bare Mo-Based Ordered Double-Transition Metal MXenes As High-Performance Anode Materials for Aluminum-Ion Batteries

Spatial Isolation-Inspired Ultrafine CoSe2 for High-Energy Aluminum Batteries with Improved Rate Cyclability

Reversible Al Metal Anodes Enabled by Amorphization for Aqueous Aluminum Batteries