Abstract:Saturated soil shear strength is a primary factor that reflects the driving resistance of agricultural machinery in paddy soils. The determination of soil shear strength indicators, such as cohesion and internal frictional angle, is crucial to improve the walking efficiency of agricultural machinery in paddy soils. However, the measurement of these indicators is often costly and time-consuming. Soil moisture content, density, and clay content are crucial factors that affect the cohesion and internal friction angle, while very limited studies have been performed to assess the interactive effects of the three factors on soil shear characteristics, especially on paddy soils. In this study, eight soil samples were taken from eight paddy fields in Southeastern China, and the central composition rotatable design was used to classify the soil samples into five levels based on different clay content (X1), moisture content (X2), and density (X3). The direct shear tests were carried out indoors on the remolded paddy soil using a self-made shear characteristic measuring device. Then, both individual and interactive effects of X1, X2, and X3 on soil cohesion and internal friction angles on paddy soils were systematically investigated and analyzed using the regression analysis method in the data processing software Design-Expert. Our results indicated that the effects of the three environmental factors on soil cohesion were in the order of X1 > X2 > X3, while the order was X2 > X3 > X1 for the impact on internal friction angle. The interactive effects were in the order of X1X2 > X1X3 > X2X3 for cohesion and X1X2 > X2X3 > X1X3 for internal friction angle. Two prediction models were successfully established to quantify the soil cohesion and internal friction angle as affected by soil physical properties, and the coefficient of determination (R2) was 0.91 and 0.89 for the two equations, respectively. The model validations using new soil samples suggested that the models were capable of predicting the shear characteristic parameters under different physical parameters effectively, with errors between predicted and measured soil shear strength indicators within 15% and relative root mean square error less than 11%.

Estimating the aggregate/intraaggregate mass ratio of a shrinking soil

An integrated approach to soil structure, shrinkage, and cracking in samples and layers

The soil reference shrinkage curve

Macro- and Meso-Scale Parametric Analysis of Egg-shaped Yield Surface of Structural Soil

The physical effects of an intra-aggregate structure on soil shrinkage

Two-Factor Model of Soil Suction from Capillarity, Shrinkage, Adsorbed Film, and Intra-aggregate Structure

Shrinkage anisotropy characteristics from soil structure and initial sample/layer size

An Improved Quantification Method for Characterisation of Clay Microstructure Using SEM

Physical modeling of the soil swelling curve vs. the shrinkage curve

Estimating Hydraulic Conductivity of Naturally Sedimented Clays Using Compression Curves

Variations in soil erodibility (K-factor) for the Chernozems depending on the method of texture determination

Water retention of rigid soils from a two-factor model for clay

Quantification of the Soil Stiffness Constants Using Physical Properties of Paddy Soils in Yangtze Delta Plain, China

Modeling Strain-Rate Dependent Behavior of KR0-Consolidated Soft Clays

A Numerical Method for the Chloride Diffusivity in Concrete with Aggregate Shape Effect

Bayesian Inference of Spatially Varying Parameters in Soil Constitutive Models by Using Deformation Observation Data

Estimation of Soil Shear Strength Indicators Using Soil Physical Properties of Paddy Soils in the Plastic State

Hydraulic Conductivity of Reconstituted Clays Based on Intrinsic Compression

A Thermal State‐dependent Bounding Surface Model for Volume Change of Clay

Aggregation and Dehydration of Excavated Soft Clay and Use for Subgrade Engineering-Part 2: A Pilot-Scale Study

The connection between soil shrinkage and pore water distribution of compacted clays using the nuclear magnetic resonance technique