Valorization of marble sludge waste in biodiesel production using a central composite design
Kamilia A. El-Naggar,Eman S. Mansor,Ibrahim M. Maafa,Ahmed Abutaleb,Ayman Yousef,Saleh M. Matar,Eman M. Abdel Hamid
DOI: https://doi.org/10.1038/s41598-024-77819-3
IF: 4.6
2024-11-24
Scientific Reports
Abstract:This work addresses the scarcity of energy resources and environmental issues by concentrating on the synthesis of biodiesel by the transesterification of waste cooking oil with methanol. Marble sludge (MS), a novel heterogeneous catalyst, was used to speed up the rate of reaction. The catalyst's physical and chemical characteristics were thoroughly examined using a variety of methods, including X-ray diffraction, X-ray Fluorescence, SEM, particle size distribution, and BET analysis. Using the MS catalyst, the study investigated the impact of important parameters on the yield of biodiesel from waste cooking oil with the aid of response surface methodology using Design-Expert version 13 software. These parameters included temperature (50–70°C), reaction time (1 – 4 h), catalyst concentration (1–5 wt%), and methanol-to-oil molar ratio (5–20 mol/mol). Optimization of the parameters was performed for economic targets to lower the production cost of biodiesel. The results showed that a methanol-to-oil molar ratio of 20:1, a catalyst of 5 wt%, and a reaction time of 1 h at 57°C were the ideal parameters for obtaining a biodiesel yield of 93.5%. The resultant biodiesel revealed promising characteristics, such as a flash point of 160°C, a kinematic viscosity of 4 mm 2 /s, and a density of 0.871 g/cm 3 . The study demonstrates the significant consequences and real-world advantages of using rational engineering methods to use MS as a very effective, stable, and easily recoverable catalyst for the long-term, sustainable generation of biodiesel from waste cooking oil.
multidisciplinary sciences