Abstract:In order to study the fatigue, 13° impact and 90° impact performance of wheel and propose a wheel structure design and optimization method based on these performance, taking a type wheel as research objects, united topology optimization was performed based on dynamic bending and radial fatigue tests, and an assembled wheel with a magnesium alloy rim and an aluminum alloy disc was designed. Finite element models of the assembled wheel for 13° impact tests were established to analyze the effective plastic strain of the wheel under two conditions of the hammer facing the spoke and the window respectively. And established finite element models of the assembled wheel for 90° impact tests, analyzed the deformation of the inner wheel flange and the effective plastic strain of the rim and disc when the hammer impacted facing the window, and analyzed the failure range of the wheel and the effective plastic strain of the rim and disc beyond the 25% circumferential range (90°) of the impact position when the hammer impacted facing the valve window. Then studied the relationship between these performance and the wheel structure. The parametric models of the assembled wheel under four finite element conditions were established with 12 design variables defined by using the mesh morphing technology. The Optimal Latin Hypercube design and Hammersley design were used to fit the Kriging surrogate model and to validate the precision of the surrogate model in Isight software platform where the DEP-MeshWorks and LS-DYNA software were integrated. Using the established surrogate model, Non-dominated Sorting Genetic Algorithm-II (NSGA-II) was adopted to perform the multi-objective optimization of the wheel. The Pareto frontier was obtained, and a compromise solution was selected as the optimal design result. The weight of the optimized assembled wheel was 28.59% less than that of the same type cast aluminum alloy wheel. Test the optimized wheels referencing four finite element conditions, and validate the correctness of finite element models by comparing the simulation and test values of equivalent strain and maximum acceleration on measuring points. The simulation analyses were in agreement with the test results. A wheel structural design process and multi-objective optimization method based on the fatigue, 13° impact and 90° impact tests performance were realized in this article, providing the theoretical and technical basis for wheel optimization design.

An optimization design method of asymmetric wheel bearing with equal friction torque and equal fatigue life in two rows

Study on the Design Method of Equal Strength Rim Based on Stress and Fatigue Analysis Using Finite Element Method

Multi-objective Optimization Design for Automotive Wheel Bearings by Simulated Annealing Method

Adaptive Multi-Objective Optimum Design of Journal Bearing Based on A Back-Stepping Approach

Fatigue life optimization and lightweight design of wheel based on entropy weight grey relation analysis and modified NSGA-II

Optimization Analysis on Assembly Interference of Cylindrical Roller Bearings

Numerical Optimization Design for Automotive Wheel Bearings Using Genetic Algorithm

Multi-objective optimization design of wheel based on the performance of 13° and 90° impact tests

Optimization Design of Non-liquid Friction Spherical Sliding Bearing Based on ANSYS

Optimizing Multi-Row Cam Roller Bearing for Long Fatigue Life of Hydraulic Motors

Structural Optimization of Ball Bearings with Three-Point Contact at High-Speed

Topology Optimization and Multi-objective Optimization of Wheel Based on Fatigue Tests

Investigation Of Optimizing Arrangement Forms For Combined Angular Contact Ball Bearings

Optimization design of assembled wheel based on performance of fatigue and 13° impact

Fatigue Life Analysis and Research on Double Row Angular Contact Ball Bearing

An Optimization Design Method of a Cylindrical Roller Bearing with the Low Friction Torque

Optimization Design of Thin Wall Angular Contact Ball Bearing Based on MATLAB Genetic Algorithm

Optimization and Design of a Railway Wheel Profile Based on Interval Uncertainty to Reduce Circular Wear

Multi-objective optimisation of a metro wheel profile to reduce wheel flange wear and RCF considering the distribution density of wheel−rail contact points

Multi‐objective optimization of main bearing assembly structure based on improved NSGA‐II

Bi-level optimization and integrated multiple-criteria decision making under uncertainty for structural design of insulated bearings