Innovative approach for predicting biogas production from large-scale anaerobic digester using long-short term memory (LSTM) coupled with genetic algorithm (GA)

Mohammad Milad Salamattalab,Maryam Hasani Zonoozi,Mahboubeh Molavi-Arabshahi
DOI: https://doi.org/10.1016/j.wasman.2023.12.046
IF: 8.816
2024-03-01
Waste Management
Abstract:An artificial neural network (ANN) model called long-short term memory (LSTM), coupled with a genetic algorithm (GA) for feature selection, was used to predict biogas production of large-scale anaerobic digesters (ADs) of Tehran South Wastewater Treatment Plant (Iran), with a biogas production of approximately 30,000 Nm<sup>3</sup>/d. In order to employ the real conditions, the hydraulic retention time (HRT) of the ADs (21 days) was considered as the LSTM look-back window. To evaluate the model predictions, three different scenarios were defined. In the first scenario, the model predicted the produced biogas by using raw wastewater characteristics and reached the coefficient of determination of R<sup>2</sup> = 0.84. The GA selected four out of eleven parameters of raw wastewater, including loads of BOD<sub>5</sub>, COD, TSS, and TN (kg/d), as the most informative data for the model. In the second scenario, the model predicted the produced biogas by employing the data of the thickened sludge streams entering the ADs and yielded a higher accuracy (R<sup>2</sup> = 0.89). In this scenario, GA selected two out of six parameters of the sludge streams, including total flow rate (m<sup>3</sup>/d) and average solids content (w/w%). Finally, in the third scenario, by putting the parameters of the two previous scenarios together, the model's prediction accuracy increased slightly (R<sup>2</sup> = 0.90). The results demonstrated that the GA-LSTM modeling technique could achieve reliable performance in predicting biogas production of large-scale ADs by including HRT in modeling procedure. It was also found that the raw wastewater characteristics severely affect AD behavior and can be successfully used as the input data of the AD models.
environmental sciences,engineering, environmental
What problem does this paper attempt to address?