Abstract:On the basis of the yellow iridium phosphor, bis(2-phenylbenzothiozolato-N,C-2 ')iridium(acetylacetonate) [(bt)(2)Ir(acac)], the three halogen-substituted analogues were designed and synthesized by introducing the F, Cl, and Br atoms to the 4-position of phenyl ring in the ligand of 2-phenylbenzo[d]thiazole. The optoelectronic properties of all the four iridium complexes were fully investigated. Compared to the 559 nm peak emission of (bt)(2)Ir(acac) in CH2Cl2 solution, adding F atom caused the peak emission of (4-F-bt)(2)Ir(acac) blue shift to 540 nm, while adding Cl and Br atoms made the peak emissions of (4-Cl-bt)(2)Ir(acac) and (4-Br-bt)(2)Ir(acac) slightly blue shift to 554 and 555 nm, respectively. The PhOLEDs using the four iridium complexes as dopants were initially fabricated in the conventional device structure (device I): ITO/MoO3/NPB/CBP/CBP:dopants/TPBi/LiF/Al. The three halogen-substituted analogues exhibited turn-on voltages of 3.5-3.9 V, maximum current efficiencies of 35.5-52.4 cd A(-1), maximum power efficiencies of 18.3-29.4 lm W-1 and maximum external quantum efficiencies (EQE) of 12.1-17.3%, which were superior than the (bt)(2)Ir(acac)-based device (28.4 cd A(-1), 19.9 lm W-1, 9.8%). After reducing the hole-injecting barrier and using better carrier-transporting materials in the optimized device II, ITO/MoO3/TAPC/TCTA/CBP:dopants/TmPyPB/LiF/Al, all the four devices exhibited lower turn-on voltages of 2.9-3.1 V and excellent performance with maximum EQE over 20%. As a result, they showed high power efficiencies in the range of 55.9-83.2 lm W-1. Among the four optimized devices, the (4-F-bt)(2)Ir(acac)-based device achieved the highest power efficiency of 83.2 lm W-1. Remarkably, the (bt)(2)Ir(acac)-based device still possessed high current efficiency of 53.5 cd A(-1), power efficiency of 23 lm W-1, and EQE of 19.6% at extremely high luminance of 10 000 cd m(-2).

Blue‐Emitting Iridium(III) Carbene Phosphors with Suppressed Efficiency Roll‐Off and Enhanced Durability of Hyper‐OLED Devices

Structural Engineering of Iridium(III) Phosphors with Imidazo[4,5-b]pyrazin-2-ylidene Cyclometalates for Efficient Blue Electroluminescence

Iridium(III) Carbene Phosphors with Fast Radiative Transitions for Blue Organic Light Emitting Diodes and Hyperphosphorescence

Ir(III) Metal Emitters with Cyano‐Modified Imidazo[4,5‐b]pyridin‐2‐ylidene Chelates for Deep‐Blue Organic Light‐Emitting Diodes

Blue Electrophosphorescence from Iridium(III) Phosphors Bearing Asymmetric Di‐N‐Aryl 6‐(trifluoromethyl)‐2H‐imidazo[4,5‐b]pyridin‐2‐ylidene Chelates

Bis-tridentate Ir(III) Phosphors and Blue Hyperphosphorescence with Suppressed Efficiency Roll-Off at High Brightness

New [3+2+1] Iridium Complexes As Effective Phosphorescent Sensitizers for Efficient Narrowband Saturated-Blue Hyper-OLEDs

Suppression of Efficiency Roll-off in Highly Efficient Blue Phosphorescent Organic Light-Emitting Devices Using Novel Iridium Phosphors with Good Electron Mobility

Novel Design of Iridium Phosphors with Pyridinylphosphinate Ligands for High-Efficiency Blue Organic Light-emitting Diodes

Blue Hyperphosphorescence Based on Green Ir(III) Sensitizer with Dual CF3 Substituted Imidazo[4,5-c]pyridin-2-ylidene Cyclometalates

Blue Iridium (III) Phosphorescent OLEDs with High Brightness Over 10 000 cd m−2 and Ultralow Efficiency Roll‐Off

High Fluorescence Rate of Thermally Activated Delayed Fluorescence Emitters for Efficient and Stable Blue OLEDs

Low Efficiency Roll‐Off Blue Phosphorescent OLEDs at High Brightness Based on [3+2+1] Coordinated Iridium (III) Complexes

Highly Efficient Bluish Green Organic Light-Emitting Diodes Of Iridium(Iii) Complexes With Low Efficiency Roll-Off

Carbazole‐Based Iridium(III) Complexes for Electrophosphorescence with EQE of 32.2% and Low Efficiency Roll‐Off

Iridium(III) phosphors with bis(diphenylphorothioyl)amide ligand for efficient green and sky-blue OLEDs with EQE of nearly 28%

Regioselective Syntheses of Imidazo[4,5- b ]pyrazin-2-ylidene-Based Chelates and Blue Emissive Iridium(III) Phosphors for Solution-Processed OLEDs

Enhanced Emitting Dipole Orientation Based on Asymmetric Iridium(III) Complexes for Efficient Saturated-Blue Phosphorescent OLEDs

Bis-tridentate Ir(III) Phosphors Bearing Two Fused Five-Six Membered Metallacycles; Strategy to Improved Photostability of Blue Emitters.

Peripheral engineering of Ir(III) emitters with imidazo[4,5-b]pyrazin-2-ylidene cyclometalates for blue organic light emitting diodes

High Power Efficiency Yellow Phosphorescent Oleds by Using New Iridium Complexes with Halogen-Substituted 2-Phenylbenzo[d]thiazole Ligands