A strategy associated with conductive binder and 3D current collector for aqueous zinc-ion batteries with high mass loading

Liwen Ma,Xinyu Wang,Juncai Sun

DOI: https://doi.org/10.1016/j.jelechem.2020.114395

IF: 4.598

2020-09-01

Journal of Electroanalytical Chemistry

Abstract:<p>In terms of large-scale energy storage, low-cost, environmental-friendly aqueous zinc-ion batteries have great potential, but the mass loading of the cathode materials is still need to be improved for practical application. In order to manufacture VO₂ cathodes with high mass loading for using in zinc ion batteries, a strategy associated with conductive binder and 3D current collectors was developed, where PEDOT and carbon fabric were used as the conductive binder and 3D current collector, respectively. As a result, the aqueous batteries assembled with conductive binder would deliver a higher capacity (332 mAh g⁻¹ at 0.62C) compared to non-conducting binder. Even the current density reaching to 92.9C, the aqueous batteries keep a good capacity (255 mAh g⁻¹⁾, which is higher than the cathodes using a conventional binder. The Zn-VO₂ batteries also have high energy/power density (177 Wh kg⁻¹ even at 35.4 kW kg⁻¹) and superior cycling stability of up to 2000 cycles. Such excellent rate capability and cycle stability can be illustrated by the capacitive response and fast diffusion coefficient of Zn²⁺ (~10⁻⁹ cm⁻² s⁻¹). The VO₂ loading can be as high as 15 mg cm⁻¹. Therefore, the use of 3D current collectors and conductive binder in zinc-ion batteries has a good effect which could enable achieve the zinc-ion batteries to have stable cycle life, great rate capability and high energy and power densities. This method provides a versatile approach to building high mass loading cathodes for the aqueous zinc-ion Batteries (ZIBs) systems with the advantages of environment friendly, low-cost and high security.</p>

chemistry, analytical,electrochemistry