Abstract:Depleted gas reservoir type underground gas storage is the most widely distributed gas storage in the world. Due to the complex geological conditions and frequent gas injection and production operations, it is prone to the wellbore integrity failures leading to hazards such as annular pressure. To protect the wellbore integrity and contain the escape of gas to subterranean formations or surface, a finite element model is developed to study the wellbore integrity change. This model simulates the typical gas injection and production processes of gas storage with complex geological conditions and non-uniform ground stress. A new comprehensive method considering complex well conditions was developed to simulate the wellbore integrity failure process more realistically. This model can predict the wellbore integrity failure and high-risk areas during the gas injection and production processes. The simulation results indicate that the cement shear failure sections are mainly concentrated near the upper and lower boundaries of the formation interlayer during the gas injection process, and the distribution area and trend of the shear failure areas are the same as the gas production process. The most common cement tensile failure sections during the gas injection process all occur on the inner side of the cement in the direction of maximum ground stress during the gas injection process. The highest effective (Von Mises) stress area of the casing is mainly concentrated in the upper and lower boundary zone of the formation interlayer during the gas injection process. And the highest Von Mises stress sections are mainly distributed in the direction of the minimum ground stress near the formation interlayer lower boundary inside the casing, which is similar to the distribution in gas production process. The first cohesive failure position and final failure distribution result of cement inner interface both appear in the depth range of the formation interlayer. The cement outer interface's first and final failure areas are all concentrated on the lower boundary of the formation interlayer and consistent with the direction of the maximum ground stress. The cement inner interface failure occurred earlier but not as significant as the outer interface failure, which occurred later but the failure range was large in this case. Practical guidelines and solutions derived from the simulation results can be useful for improved wellbore integrity protection in field applications.

Study on prediction of sustained casing pressure in tubing-casing annulus based on bubble migration experiment

Prediction of annulus liquid level depth in high-temperature and high-pressure gas wells based on sustained casing pressure

Research on the establishment of gas channeling barrier for preventing SCP caused by cyclic loading-unloading in shale gas horizontal wells

Prediction Analysis of Downhole Tubing Leakage Location for Offshore Gas Production Wells

Study on annular pressure buildup phenomenon in subsea wells considering the effect of cement

Risk Assessment of Annular Pressure Caused by Tubing Leakage in Offshore Gas Wells with High CO2

Study on Annular Pressure Buildup in Offshore Heavy Oil Thermal Recovery Wells Considering Dissolved Gas Contained in Annuli

Gas Migration Model for Non-Newtonian Fluids Under Shut-In Well Conditions

Research and engineering application of pre-stressed cementing technology for preventing micro-annulus caused by cyclic loading-unloading in deep shale gas horizontal wells

Dynamic performance prediction of coalbed methane wells under the control of bottom-hole pressure and casing pressure

Study on the Mechanism of Gas Intrusion and Its Transportation in a Wellbore under Shut-in Conditions

Numerical Study of Casing Microleakage Flow Field Sensitivity and Acoustic Field Characteristics

Experimental and Numerical Simulation on the Generation and Development of Cumulative Plastic Strain of Cement Sheath in Salt Cavern Gas Storage Well

Response analysis and safety control of tubing vibration in HPHT and ultra-deep gas wells

An Analytical Method for Timely Predicting of Coal Seam Pressure during Gas Production for Undersaturated Coalbed Methane Reservoirs

Research on Prediction Model of Interlayer Leakage in Separate Injection Wells in Offshore Oilfields

Modeling of gas migration in a dual-porosity coal seam around a borehole: The effects of three types of driving forces in coal matrix

Analysis of depleted gas reservoir underground gas storage wellbore integrity change during gas injection and production processes

Study on gas leakage along cement sheath interfaces in salt cavern gas storage well

Influence of stress on the maximum shut-in pressure of double casing under non-uniform stress