Abstract:Infrastructure development is crucial in densely populated countries like India, which leads to high demand for construction materials such as cement and aggregate. The production of these materials is energy-intensive and has adverse effects on the environment. Sustainable construction aims to reduce energy and resource usage while maintaining the strength and durability of the concrete. Using supplementary materials in concrete to replace cement and aggregate is essential. In this study, trial mixes were prepared to determine the optimal water-to-cement ratio based on fresh concrete properties like filling ability, passing ability, segregation resistance and viscosity. Cement was then partially replaced with fly ash (FA) at 10% up to 40% intervals. The FA mix was further optimized by replacing natural fine aggregate (NFA) with processed laterite fine aggregate (PLFA) at 10%, 20%, 30% and 40% to measure corrosion and bond strength properties. To conduct the testing, 150 mm cubes with centrally inserted 16 mm diameter High Yield Strength Deformed (HYSD) rebars were cast and cured in water diluted with 3.5% sodium chloride (NaCl) to maintain the marine environment for up to 120 days. Electrochemical tests were performed to measure corrosion properties, including Open Circuit Potential (OCP) and Tafel Plot Corrosion tests. As the corrosion tests are non-destructive, the same specimens were used for pull-out tests to measure the bond strength properties of the specimen.The experimental results indicate that adding FA to concrete improves its fresh properties. For further studies, 30% FA was selected based on its strength characteristics. Further examination was carried out by replacing NFA with PLFA at various percentages. The specimens containing 40% PLFA showed better corrosion resistance in terms of OCP values and corrosion rates after continuous exposure to a chloride environment. The bond strength values increase as the curing period increases. However, the bond strength of the 40% PLFA specimen decreased by 6.23% at 28 days and by 26.89% at 120 days of the curing period, compared to the 0% PLFA specimen with no laterite.

Development and characterization of fly ash enriched epoxy coatings for corrosion protection in Deep Sea water

Surface modification and interface strengthening strategies for fly ash and its application in anti-corrosion coatings

Corrosion resistance of surface texturing epoxy resin coatings reinforced with fly ash cenospheres and multiwalled carbon nanotubes

Anticorrosion mechanism of FACs-GO hybrids in ER coatings by EIS and MD simulation

Epoxy Flooring/Oil Fly Ash as a Multifunctional Composite with Enhanced Mechanical Performance for Neutron Shielding and Chemical-Resistance Applications

Study on Thick Film Wearable Solvent-free Epoxy Anticorrosive Coatings

Influence of fly ash filler on the mechanical properties and water absorption behaviour of epoxy polymer composites reinforced with pineapple leaf fibre for biomedical applications

Development and Characterization of PA 450 and PA 3282 Epoxy Coatings as Anti-Corrosion Materials for Offshore Applications

Mechanical, thermal and dielectric behaviour of C-class fly-ash coarse and fine particles reinforced epoxy resin composite

Oxygen-consuming and anti-corrosion epoxy composite coatings based on polyfurfuryl alcohol as multifunctional bio-based material

Effect of fly ash chemical components on epoxy mortar composite material performance

Enrichment of epoxy coating on amalgamation with corrosion-resistant poly (2,3-benzopyrrole)/zinc oxide nanoflowers (PBZNF) synthesized composite for carbon steel alloy featuring excellent hydrophobicity

Behavior of Alkali-Activated Fly Ash through Underwater Placement

Corrosion Resistance of Inorganic Zinc-Rich Coating Reinforced by Ni-coated Coal Fly Ash

Corrosion and Bond Strength Behaviour of Fly Ash-Based Lateritic Self-Compacting Concrete

Highly durable macromolecular epoxy resin as anticorrosive coating material for carbon steel in 3% NaCl: Computational supported experimental studies

Synthesis and characterization of polypyrrole‐fly‐ash‐adenosine composite reinforced epoxy coating for anticorrosive applications

Fabrication and characterization of novel p-Phenylamine-N(4-chloro salicylaldenemine) ligand and its metal complexes and evaluation their anti-corrosion and chemical resistance properties in epoxy/SiO2 nanocomposite for steel surface coating

A Study on the Corrosion Inhibition of Fe-Based Amorphous/Nanocrystalline Coating Synthesized by High-Velocity Oxy-Fuel Spraying in an Extreme Environment

Developing epoxy-based anti-corrosion functional nanocomposite coating with CaFe-Tolyl-triazole layered double hydroxide@g-C3N4 as nanofillers on Q235 steel substrate against NaCl corrosive environment

A smart anti-corrosion coating based on triple functional fillers