Abstract:This paper describes the design of a new magnetic flux leakage (MFL) inspection tool that performs an inline inspection to detect and characterize both metal loss and mechanical damage defects. An inspection tool that couples mechanical damage assessment as part of a routine corrosion inspection is expected to have considerably better prospects for application in the pipeline industry than a tool that complicates existing procedures. The design is based on study results that show it is feasible to detect and assess mechanical damage by applying a low magnetic field level in addition to the high magnetic field employed by most inspection tools. Nearly all commercially available MFL tools use high magnetic fields to detect and size metal loss such as corrosion. A lower field than is commonly applied for detecting metal loss is appropriate for detecting mechanical damage, such as the metallurgical changes caused by impacts from excavation equipment. The lower field is needed to counter the saturation effect of the high magnetic field, which masks and diminishes important components of the signal associated with mechanical damage. Finite element modeling was used in the design effort and the results have shown that a single magnetizer with three poles is the most effective design. Furthermore, it was found that for the three-pole system the high magnetization pole must be in the center, which was an unexpected result. The three-pole design has mechanical advantages, including a magnetic null in the backing bar, which enables installation of a pivot point for articulation of the tool through bends and restrictions. This design was prototyped and tested at Battelle’s Pipeline Simulation Facility (West Jefferson, OH). The signals were nearly identical to results acquired with a single magnetizer reconfigured between tests to attain the appropriate high and low field levels.

Range of Applicability of a Technique for Constructing Magnetic Induction Lines for Flaw Sizing in Extended Objects

Magnetic Flux Leakage Method: Large-Scale Approximation

A New Approach for Fast Identification of Flaw in Metallic Material

A 3-D Imaging Method for Local Shallow Defects on the Surface of Ferromagnetic Materials

Optimization Design Method for Excitation Magnetic Field in Motion Induced Eddy Current Magnetic Field Testing

Nondestructive Testing Method for Internal Defects in Ferromagnetic Materials under Weak Bias Magnetization

Nondestructive Testing for Shallow Defect of Ferromagnetic Objects Based on Magnetic Probe Structure

A Novel Defect Quantification Method Utilizing Multi-Sensor Magnetic Flux Leakage Signal Fusion

Detection of crack on a mild steel plate by using a magnetic probe incorporating an array of fluxgate sensors

Phase-Extraction-Based MFL Testing for Subsurface Defect in Ferromagnetic Steel Plate

Reconstruction of Damage-Induced Magnetization with Leakage Magnetic Field Signals

Detection mechanism and magnetic field distribution characteristics for plate remote-field eddy-current testing

Defect localization method for ferromagnetic pipes based on stepped magnetization in magnetic permeability perturbation testing

Magnetic Particle Testing using Cross- and Additional Orthogonal Magnetic Coils-Application in Components of Large Dimensions

The Design of a Mechanical Damage Inspection Tool Using Dual Field Magnetic Flux Leakage Technology

A NDT&E Methodology Based on Magnetic Representation for Surface Topography of Ferromagnetic Materials

High-resolution Magnetic Imaging Probe with Staggered Sensor Arrays for Small Defects Inspection

A Fast Method for Rectangular Crack Sizes Reconstruction in Magnetic Flux Leakage Testing

Magnetic nanoemulsion aided optical defect detection in carbon steel components: Effect of defect width variation on optical contrast

Structural Coupled Electromagnetic Sensing of Defects Diagnostic System.

Evaluation of Depth Size Based on Layered Magnetization by Double-Sided Scanning for Internal Defects