Abstract:Over the last decade, the global fight against climate change through electrification has led to an increase in research on building heating, ventilation, and air conditioning (HVAC) systems that utilize intelligent control algorithms to provide demand-side grid service while also maintaining the thermal comfort of building occupants. As the pivotal point between building electricity consumption and indoor thermal comfort, high-efficiency electrical vapor-compression heat pumps are at the center of these emerging studies, and various grid-interactive and occupant-comfort control algorithms have been developed for them. The impact of these algorithms on heat pump operation and performance when subjected to different weather conditions, building loads, and grid requests calls for investigation and verification via experimental testing with actual heat pumps integrated with real-time building and grid responses. This study introduces a Water-Source Heat Pump (WSHP) Hardware-in-The-Loop (HIL) Test Facility that is the first of its kind. This testbed utilizes a 2-ton variable speed water-to-air heat pump that is capable of interacting with a virtual environment currently comprised of an EnergyPlus (E+) building simulation, an agent-based occupant behavioral model, and a single U-tube ground-loop heat exchanger (GLHE) model. Detailed descriptions of the testbed’s physical design and operation, virtual environement, as well as their mutual communication is provided. An uncertainty analysis is also performed under manufacturer specified heating and cooling design conditions. This analysis shows that the total load across the WSHP’s demand side heat exchanger, i.e., the sum of its latent and sensible components, can be measured with a relative uncertainty of ± 10.4% and ± 3.6% in cooling and heating mode respectively. The WSHP’s coefficient of performance (COP) can be measured with relative uncertainties of ± 10.4% in cooling mode, and ± 3.7% in heating mode. A preliminary 24-h experimental demonstration is then performed utilizing the DOE prototype small commercial office building model in E+. The simulation takes place in Atlanta, GA on the date of 08/26/15 from 12:00 AM to 11:59 PM using TMY3 weather data. . The results from this demonstration show that over the course of this experiment the simulated outputs of zone dry-bulb temperature, zone humidity ratio, and WSHP inlet water temperature can be tracked by testbed emulators up to a root mean squared error (RMSE) of ± 0.27 °C, ± 0.376 g/kg, and ± 0.85 °C respectively. The WSHP’s dynamic behavioral characteristics and performance are also captured, and correspond well with the authors’ previous understanding of heat pump efficiency as a function of evaporator and condenser fluid inlet conditions respectively.

Simulation-assisted design of a silent façade-integrated R290 mini-split heat pump

Compact Decentral Façade-Integrated Air-to-Air Heat Pumps for Serial Renovation of Multi-Apartment Buildings

Dynamic Modelling and Validation of an Air-to-Water Reversible R744 Heat Pump for High Energy Demand Buildings

Performance Investigation on a Novel Air-Source Heat Pump Using CO2/HC for Recirculated Water Heater in Cold Regions

Development and experimental validation of a novel indirect-expansion solar-assisted multifunctional heat pump

Dynamic Energy Analysis of Different Heat Pump Heating Systems Exploiting Renewable Energy Sources

Prospective Study of a Novel Heat Pump System with Solar Energy Spectral Beam Splitting

Experimental Performance Analysis of an Improved Multifunctional Heat Pump System

Simulation Study on Thermal Performance of Solar Coupled Air Source Heat Pump System with Phase Change Heat Storage in Cold Regions

Performance Investigation on an Air Source Heat Pump System with Latent Heat Thermal Energy Storage

Eco-economic performance and application potential of a novel dual-source heat pump heating system

Performance Analysis of the Developed Air Source Heat Pump System at Low-to-Medium and High Supply Temperatures for Irish Housing Stock Heat Load Applications

A Novel solar-assisted air source heat pump system for urban renewal: Experimental test and numerical simulation

A solar-assisted low-temperature district heating and cooling network coupled with a ground-source heat pump

Performance assessment of a real water source heat pump within a hardware-in-the-loop (HIL) testing environment

A proof-of-concept study of a novel ventilation heat recovery vapour injection air source heat pump

Application of transcritical CO2 heat pumps to boiler replacement in low impact refurbishment projects

Optimal Operation of Low-Capacity Heat Pump Systems for Residential Buildings through Thermal Energy Storage

Wall-embedded micro heat pump for radiant heating in buildings: Evaluation of energy and thermal comfort performance

Design and experimental characterization of a propane-based reversible dual source/sink heat pump

Proposal and performance evaluation of a solar hybrid heat pump with integrated air-source compression cycle