Abstract:The utilisation of cotton waste as precursors in the synthesis of nanocrystalline cellulose has gained significant attention. This approach suggests a sustainable solution to address the growing concern of textile waste accumulation while simultaneously producing a valuable material. The main aim of this study is to examine the properties of cellulose nanocrystals (CNCs) obtained from postconsumer polyester–cotton waste and assess the effect of different fabric structures on the extraction and these properties. To acquire nanocellulose, a thorough decolourisation pretreatment process was utilised, which involved the treatment of polyester–cotton waste with sodium dithionite and hydrogen peroxide. Consequently, the postconsumer material was then treated with an acid hydrolysis method employing a 64% (v/v) sulphuric acid solution at 50 °C for 75 min, resulting in the formation of CNCs with average yield percentages ranging from 38.1% to 69.9%. Separation of the acid from the CNC was facilitated by a centrifugation process followed by dialysis against deionised water. Uniform dispersion was then achieved using ultrasonication. A variety of analytical techniques were employed to investigate the morphological, chemical, thermal, and physical properties of the isolated CNCs. Among these techniques, attenuated total reflection-Fourier-transform infrared spectroscopy (ATR-FTIR), energy-filtered transmission electron microscopy (EF-TEM), thermogravimetric analysis (TGA), and X-ray diffraction (XRD) were utilised to analyse the CNCs. The findings indicated that the separated CNCs exhibited a rod-shaped morphology, measuring between 78 and 358 nm in length and 5 and 16 nm in diameter, and also exhibited high crystallinity (75–89%) and good thermal stability. The extracted CNCs were mixed with polyvinyl alcohol (PVA) and glycerol to assess their reinforcing effect on plastic films. The prepared composite film exhibited improved mechanical properties and thermal stability. Incorporating CNCs led to a 31.9% increase in the tensile strength and a 42.33% rise in the modulus of elasticity. The results from this research proved that CNCs can be extracted from postconsumer mixed fabrics as a potential solution to effectively address the mounting concerns surrounding waste management in the textile industry and also provide avenues for enhancing the qualities of eco-friendly composite films.

End-of-life cotton textile-based engineered cellulose composites

Textile waste-based cellulose composites: a review

Nanocellulose reinforced lightweight composites produced from cotton waste via integrated nanofibrillation and compounding

Physicochemical Properties of Cellulose Nanocrystals Extracted from Postconsumer Polyester/Cotton-Blended Fabrics and Their Effects on PVA Composite Films

In Situ Functionalisation and Upcycling of Post‐Consumer Textile Blends into 3D Printable Nanocomposite Filaments

Epoxy resin composites reinforced with upcycled fabrics: Mechanical, thermal, and morphological analysis

Preparation and characterization of cotton fiber fragments from model textile waste via mechanical milling and enzyme degradation

Efficient and Sustainable Strategy for Recycling of Carbon Fiber-Reinforced Thermoset Composite Waste at Ambient Pressure

Investigation on the role of preform architecture on the property performance of recycled cotton-based engineered eco-composites

Mechanical characterizations of waste face masks reinforced polyester composites: Recycling wastes into resources

Sustainable applications of textile waste fiber in the construction and geotechnical industries: A retrospect

Enhanced Nanocellulose Production from Cotton and Textile Waste Using Binary and Ternary Natural Deep Eutectic Solvents

Transforming textile waste into nanocellulose for a circular future

Preparation and Characterization of Waste Cotton Fabric Reinforced Polylactic Acid Green Composites with Multifunctional Properties in a Low-Carbon Process

Design of experiments investigation into the production of all cellulose composites using regenerated cellulosic textiles

High tensile regenerated cellulose fibers via cyclic freeze-thawing enabled dissolution in phosphoric acid for textile-to-textile recycling of waste cotton fabrics

Upcycling Textile Waste into Anionic and Cationic Cellulose Nanofibrils and Their Assembly into 2D and 3D Materials

Composite panels utilizing microdust and coir pith for eco-friendly construction solutions

Regenerative Textiles: A Framework for Future Materials Circularity in the Textile Value Chain

Design, Development, and Characterization of Advanced Textile Structural Hollow Composites

Development and Evaluation of Biodegradable Weed Control Mulch Mats from End-of-Use Cotton Waste