Abstract:The process of preparing continuous carbon fiber/BN/SR composites by first infiltrating and then winding. With the development of electronics, there is an increasing demand for high‐performance heat‐dissipation materials in electronic devices. Thermal conductive silicone rubber (SR) has received significant attention in related industries due to its excellent mechanical flexibility and high thermal conductivity. However, the intrinsic thermal conductivity of SR is low, necessitating the addition of thermal conductive fillers to meet the usage requirements. Common thermal conductive fillers typically exist in powder form and require such surface modification and orientation, which increases production costs and poses challenges for large‐scale production. In this study, continuous carbon fibers (CFs) are utilized as fillers. By employing a simple pre‐infiltration and winding method, CFs are uniformly distributed in SR, aligning parallel. The CFs not only serve as thermal conductive pathways but also maintain their orientation distribution within the substrate. Furthermore, by pre‐adding boron nitride (BN) to the SR, the thermal conductivity of SR is enhanced, and BN is distributed along the fibers, further improving the enhancement effect of BN on the thermal conductivity of SR. When CF content reaches 30 vol%, the thermal conductivity of CF/BN/SR composite reaches 2.789 W m−1 K−1. Moreover, by using BN/SR before curing as a coating, it can be applied to the surface of the CF/BN/SR composite. This greatly increases the volume resistivity of the material (>1014 Ω cm) while maintaining the thermal conductivity of the composite. Using continuous fibers as fillers also enables easier implementation of mass production in the preparation of thermal conductive SR. Highlights Prepare continuous carbon fiber and boron nitride (BN)‐filled composite through mechanical winding; The carbon fiber (CF)/BN/silicone rubber (SR) composite exhibits high thermal conductivity; Improve the enhancement of BN on the TC of SR by aligning the BN along the CF; BN/SR used as insulating coating by incremental curing.

A highly thermal conductive and compliant heterogeneous composite with strong interfacial strength controlled by the degree of vulcanization

A Scalable Highly Thermal Conductive Silicone Rubber Composite with Orientated Graphite by Pre-Vulcanizing and Multilayer Stacking Method

Transposable, highly thermal conductive silicone rubber/boron nitride composites with enhanced orientation of BN by multilayer stacked hot pressing according to rheological control

The Liquid-Exfoliation of Graphene Assisted with Hyperbranched Polyethylene-G- Polyhedral Oligomeric Silsesquioxane Copolymer and Its Thermal Property in Polydimethylsiloxane Nanocomposite

Compliant composite elastomers via grafting short dangling chains for promoting thermal transport performance

Constructing a highly vertically aligned network of h-BN/CF in silicone rubber composites: Achieving superior through-plane thermal conductivity and electrical insulation

Multi‐Interfacial Heterostructure Design of Carbon Fiber/Silicone Rubber‐Oriented Composites for Microwave Absorption and Thermal Management

Flexible Composite Films with Ultrahigh Through-plane Thermal Conductivity yet Low Graphene Content

Reduced Graphene Oxide Embedded with MQ Silicone Resin Nano-Aggregates for Silicone Rubber Composites with Enhanced Thermal Conductivity and Mechanical Performance

Oriented BN/Silicone rubber composite thermal interface materials with high out-of-plane thermal conductivity and flexibility

A Novel Branched Al2O3/Silicon Rubber Composite with Improved Thermal Conductivity and Excellent Electrical Insulation Performance

A strong, machinable, and multifunctional Ti3SiC2-(Ti3SiC2-Cf) composite: Gradient architecture and mechanical properties

Thermally conductive silicone rubber composites with vertically oriented carbon fibers: A new perspective on the heat conduction mechanism

Interfacial enhancement by constructing a "flexible-rigid" structure between high-modulus fillers and low-modulus matrix in carbon fiber/silicone rubber composites

Thermally conductive and compliant polyurethane elastomer composites by constructing a tri-branched polymer network

PDMS/functionalized h-BN/liquid metal flexible composite with dual-network structure for achieving superior thermal conductivity and low thermal resistance via interfacial grafting

High-Performance Thermal Interface Materials with Magnetic Aligned Carbon Fibers

Preparation of continuous carbon fiber‐filled silicone rubber with high thermal conductivity through wrapping

Bidirectionally Oriented Carbon Fiber/Silicone Rubber Composites with a High Thermal Conductivity and Enhanced Electromagnetic Interference Shielding Effectiveness

Synergistic Enhanced Thermal Conductivity of Polydimethylsiloxane Composites Via Introducing SCF and Hetero-Structured GB@rGO Hybrid Fillers

Soft, Tough, Antifatigue Fracture Elastomer Composites with Low Thermal Resistance through Synergistic Crack Pinning and Interfacial Slippage