Abstract:Semiconducting metal oxides can detect low concentrations of NO2 and other toxic gases, which have been widely investigated in the field of gas sensors. However, most studies on the gas sensing properties of these materials are carried out at high temperatures. In this work, Hollow SnO2 nanofibers were successfully synthesized by electrospinning and calcination, followed by surface modification using ZnO to improve the sensitivity of the SnO2 nanofibers sensor to NO2 gas. The gas sensing behavior of SnO2/ZnO sensors was then investigated at room temperature (~20 & DEG;C). The results showed that SnO2/ZnO nanocomposites exhibited high sensitivity and selectivity to 0.5 ppm of NO2 gas with a response value of 336%, which was much higher than that of pure SnO2 (13%). In addition to the increase in the specific surface area of SnO2/ZnO-3 compared with pure SnO2, it also had a positive impact on the detection sensitivity. This increase was attributed to the heterojunction effect and the selective NO2 physisorption sensing mechanism of SnO2/ZnO nanocomposites. In addition, patterned electrodes of silver paste were printed on different flexible substrates, such as paper, polyethylene terephthalate and polydimethylsiloxane using a facile screen-printing process. Silver electrodes were integrated with SnO2/ZnO into a flexible wearable sensor array, which could detect 0.1 ppm NO2 gas after 10,000 bending cycles. The findings of this study therefore open a general approach for the fabrication of flexible devices for gas detection applications.

Biotemplate-Assisted Growth of ZnO in Gas Sensors for ppb-Level NO 2 Detection

Bioinspired supramolecular arrayed heterojunction-based room-temperature sensor for high-performance gas detection

Enhanced gas-sensing performance of SnO2/Nb2O5 hybrid nanowires

Mesoporous ZnO: In nanosheets grown on g-C3N4 for improved detection of NO2

WO3 Nanosheet/W18O49 Nanowire Composites for NO2 Sensing

ZnO/GaN n-n heterojunction porous nanosheets for ppb-level NO 2 gas sensors

Highly Sensitive, Selective, Flexible and Scalable Room-Temperature NO<sub>2</sub> Gas Sensor Based on Hollow SnO<sub>2</sub>/ZnO Nanofibers

Fabrication of Large-Area Au Nanoparticle Decorated ZnO@ZIF-8 Core-Shell Heterostructure Nanorods for Ppb-Level NO2 Gas Sensing at Room Temperature

Highly Sensitive, Selective, Flexible and Scalable Room-Temperature NO2 Gas Sensor Based on Hollow SnO2/ZnO Nanofibers

ZIF-derived Nanoparticles Modified ZnO Nanorods Hierarchical Structure for Conductometric NO2 Gas Sensor

Confined Formation of Ultrathin ZnO Nanorods/Reduced Graphene Oxide Mesoporous Nanocomposites for High-Performance Room-Temperature NO 2 Sensors.

Enhanced NO2 sensing performance of ZnO@ZnS core-shell structure fabricated using a solution chemical method

Engineering SnO 2 nanorods/ethylenediamine-modified graphene heterojunctions with selective adsorption and electronic structure modulation for ultrasensitive room-temperature NO 2 detection

Controllable synthesis of heterostructured CuO–ZnO microspheres for NO 2 gas sensors

Pd@Pt Core-Shell Nanocrystal-Decorated ZnO Nanosheets for ppt-Level NO2 Detection

ZnO Nanorod/porous Silicon Nanowire Hybrid Structures As Highly-Sensitive NO2 Gas Sensors at Room Temperature

Pompon-like Ni doped ZnO mesoporous microspheres for conductometric NO 2 sensing properties at room temperature

In situ growth of ZnO nanorods array film on the surface of ITO for low temperature detection of NOx gas

Facile solvothermal synthesis of ZnO/Ti3C2Tx MXene nanocomposites for NO2 detection at low working temperature

Conductometric NO2 Gas Sensors Based on MOF-derived Porous ZnO Nanoparticles

An Ultrasensitive NO 2 Gas Sensor Based on a NiO-SnO 2 Composite with a Sub-ppb Detection Limit at Room Temperature