Abstract:In the present framework, the TiO2 thin film at different thicknesses (where d =100, 120, 140, 160, 180, and 200 nm) has been successfully synthesized using the well-known thermal evaporation technique. The thickness of TiO2 layer has been monitored utilizing the quartz crystal monitor (type-FTM4, Edwards). The effect of TiO2 film’s thickness on the structural, optical, electrical and photovoltaic properties has been investigated. The structural parameters of TiO2 layer such as the lattice strain, ε and the crystalline size, D have been computed utilizing the XRD pattern. According to the results of the XRD, it has been found that the crystalline size has been increased while the lattice stress decreased as the thickness of the TiO2 layer increased. The results of SEM have been shown that as the TiO2 film’s thickness increases, the grain size improves. On the other hand, the values of the optical bandgap decreases as the thickness of the film increases. The energy diagram of TiO2 layer and also for the fabricated solar cell have been plotted. The capacitance-voltage (C-V) characteristics have been studied to determine the type of the heterojunction (sharp or gradual). According to such measurements, the built-in-voltage, the width of the depletion region, and the maximum electric field have been extracted. The polarization dependence of an electric field has been investigated. As well, the significant influence of TiO2 layer on optimizing the performance of the TiO2/p-Si solar cell has been also studied. The dark and illuminated current density-voltage (J-V) characteristics for the fabricated solar cell has been studied. The Ohmic, SCLC regions and the transition voltage have been determined. The parameters of the TiO2/P-Si solar cell such as the rectification ratio, RR, the junction resistance and the parasitic resistances have been studied. Furthermore, it has been found that the power conversion efficiency PCF and the fill factor FF of the heterojunction have been increased with increasing the thickness of TiO2 layer. Finally, the temperature dependence of the open-circuit voltage (V OC ) has been studied to estimate the activation energy as a function of the thickness of TiO2 layer in the fabricated system.

Potential of TiO2 as a capping layer for industrial c-Si PERC solar cells

One-step preparation of TiO2 anti-reflection coating and cover layer by liquid phase deposition for monocrystalline Si PERC solar cell

Influence of Al2O3/SiNx Rear-Side Stacked Passivation on the Performance of Polycrystalline PERC Solar Cells

Atomic Layer Deposition of an Effective Interface Layer of TiN for Efficient and Hysteresis-Free Mesoscopic Perovskite Solar Cells

Tuning Back Side Passivation for Enhancing the Performance of PERC Solar Cells

TiO 2 Thin Films by Atmospheric Pressure Chemical Vapor Deposition for Rear Surface Passivation of p-PERT Solar Cells

Mitigated Front Contact Energy Barrier for Efficient and Stable Perovskite Solar Cells

Nitrogen-Doped Titanium Dioxide as a Hole Transport Layer for High-Efficiency Formamidinium Perovskite Solar Cells

Solution-Processed Titanium Oxide for Rear Contact Improvement in Heterojunction Solar Cells

Reconfiguration toward Self‐Assembled Monolayer Passivation for High‐Performance Perovskite Solar Cells

Self‐Diffusion Effect Assisted TiO2/Li3PO4 Electron Selective Passivating Contact in Silicon Solar Cells Approaching 23% Efficiency

Improved Al 2 O 3 / SiN x and SiO 2 / SiN x stack passivation layer structure PERC sc‐silicon solar cells on mass production line

Efficiency improvement of PERC solar cell using an aluminum oxide passivation layer prepared via spatial atomic layer deposition and post-annealing

The pivotal role of TiO2 layer thickness in optimizing the performance of TiO2/P-Si solar cell

Comparative Study on TiO 2 and C 60 Electron Transport Layers for Efficient Perovskite Solar Cells

Bifunctional Interface Engineering by Oxidating Layered TiSe 2 for High-Performance CsPbBr 3 Solar Cells

Highly efficient overlayer derived from peroxotitanium for dye-sensitized solar cells

Photoelectrical Dynamics Uplift in Perovskite Solar Cells by Atoms Thick 2D TiS2 Layer Passivation of TiO2 Nanograss Electron Transport Layer.

Numerical Simulation of Nitrogen-Doped Titanium Dioxide as an Inorganic Hole Transport Layer in Mixed Halide Perovskite Structures Using SCAPS 1-D

Enhancing poly-Si contact through a highly conductive and ultra-thin TiN layer for high-efficiency passivating contact silicon solar cells

Efficient printable carbon-based mesoscopic perovskite solar cells based on aluminum and indium doped TiO2 compact layer