Abstract:As the advancement of deep earth energy engineering in the 21st century, the challenges imposed by dynamic loads and high temperatures will be increasingly regular. This paper studied the dynamic mechanical behaviors and fracture characteristics of defective red sandstone (single fissure inclination of 0°, 30°, 60°, and 90°) subjected to thermal treatments (25 °C, 200 °C, 400 °C, 600 °C, and 800 °C) under descending amplitude low cycle (DALC) impact loading. The experiments were conducted using a modified split Hopkinson pressure bar (SHPB) system, and the fracture surfaces of the failed specimens were characterized through the use of high-resolution 3D laser scanning to obtain point cloud data. Subsequently, the fractal, roughness, texture, and elevation features of fracture surfaces were analyzed using the boxing-counting method, grayscale co-occurrence matrix (GLCM), and elevation-based statistics. The scanning electron microscopy (SEM) was utilized to study the fracture micromorphology as well. Additionally, the mechanisms of damage and fracture evolution were discussed based on the results of X-ray diffractometry (XRD), synchronous thermal analysis (STA), discrete element method (DEM), and strain energy density theory. The results demonstrate that the peak stress and dynamic elastic modulus deteriorate with rising temperatures and increase with larger fissure angles. While the peak strain, strain rate, and peak stress increase factor (PIF) exhibit the opposite trend. The threshold values for the intensification of these events are 400 °C and 60°. The damage is dominated by tensile cracks, which transition to shear at 30° and 60° due to temperature dependence. Meanwhile, the fractal dimension (D C ), joint roughness coefficient (JRC), second-order statistics of GLCM, and elevation eigenvalues have been modeled using multiple regression analysis to investigate their interaction with temperature and fissure angle. The best-fit models illustrate significant linear or non-linear correlations between the aforementioned parameters and the mechanical parameters. Furthermore, the magnitude and distribution pattern of thermal cracks, as well as the growth of shear fractures, are governed by the dehydration, thermal expansion, phase transition, plasticization, thermal fracture, and thermal decomposition. Finally, strain energy density theory manifests promising prospects for understanding and predicting DALC impact fracture patterns of specimens.

Fatigue-thermal damage characteristics of red sandstone with a hole under high-temperature cyclic loading coupling and microstructural degradation

Energy evolution and macro-micro failure mechanisms of frozen weakly cemented sandstone under uniaxial cyclic loading and unloading

Mechanical behavior and fracture characteristics of high-temperature sandstone under true triaxial loading conditions

Mechanical Characteristics of Sandstone under High Temperature and Cyclic Loading in Underground Coal Gasification

The effects of thermal treatments on the subcritical crack growth of Pingdingshan sandstone at elevated high temperatures

Discrete Element Modeling of Thermally Damaged Sandstone Containing Two Pre-Existing Flaws at High Confining Pressure

Thermal damage and mechanical properties of high temperature sandstone with cyclic heating–cooling treatment

Creep Rupture and Permeability Evolution in High Temperature Heat-Treated Sandstone Containing Pre-Existing Twin Flaws

Study of the mechanical characteristics of coal-serial sandstone after high temperature treatment under true triaxial loading

Physical and Mechanical Properties and Damage Mechanism of Sandstone at High Temperatures

Constitutive Model and Fracture Failure of Sandstone Damage under High Temperature-Cyclic Stress

Evaluation of Thermophysical and Mechanical Properties of Sandstone Due to High-Temperature

Experimental study on response characteristics of micro–macroscopic performance of red sandstone after high-temperature treatment

Dynamic impact properties of deep sandstone under thermal-hydraulic-mechanical coupling loads

Damage deterioration mechanism and damage constitutive modelling of red sandstone under cyclic thermal-cooling treatments

Uniaxial compression tests on red sandstone specimens after different high-temperature processing and cooling time

Experimental Investigation of Temperature Effects on the Physical and Mechanical Properties of Red Sandstone

Effects of high temperature on the mechanical behaviors of sandstone under true-triaxial unloading conditions

The Influence of Temperatures on the Mechanical Properties and Fracture Behavior of Rocks under Mixed Mode I/II Loading

Experimental investigation of a fissured rock with thermal storage potential subjected to descending amplitude low cycle impacts

Study on the Failure Process and Acoustic Emission Characteristics of Freeze–Thawed Sandstone under Cyclic Loading and Unloading