Abstract:Water-evaporation-induced electricity generation provides an ideal strategy to solve growing energy demand and supply power for self-powered systems because of its advantages of a highly spontaneous process, continuous power generation, and low cost. However, the reported evaporation-induced generators are limited to working only in deionized (DI) water, leading to a low output power. Herein, we utilize a modified multiple ion mode to demonstrate that the streaming potential can be optimized in microchannels filled with salt solution and achieve an enhanced evaporation-induced output power in salt solution by a generator based on honeycomb-structured reduced graphene oxide (rGO) film with abundant interconnected microchannels. This generator enables an around 2-fold open-circuit voltage (Voc) and a 3.3-fold power density of 0.91 μW cm–2 in 0.6 M NaCl solution compared to that in DI water. Experiments evidence that the honeycomb structure with abundant interconnected microchannels plays a key role in achieving high and stable output power in salt solution because of its large specific surface area and excellent ion-exchange capacity. Notably, it can work at all times of day and night for more than 240 h in natural seawater, delivering a stable Voc of ∼0.83 V with a power density of 0.79 μW cm–2. This study expands a working solution for water-evaporation-induced electricity generation from DI water to natural seawater, advancing a great step toward practical applications.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.1c04508?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.1c04508</a>.Supplementary experimental details, including a schematic of a full analytical multiple ion model and the equivalent electric circuit of the considered system; modulus and apparent viscosity and XPS spectrum of rGO; optical photograph of the generator; XRD patterns of layered-structured rGO film and honeycomb-structured rGO film; Voc–time curve and Isc density–time curve of a generator based on a honeycomb-structured rGO film in DI water, seawater, and natural river water; Voc–time curve and Isc density–time curve of a generator based on a layer-structured rGO film in DI water; specific surface area of a layer-structured rGO film and honeycomb-structured rGO film; output Voc (red curve), Isc density (blue curve), and power density of a device of a honeycomb-structured rGO film measured for different load resistances in 0.6 M NaCl solution and DI water; experimental and simulated Isc versus NaCl concentration curves of a honeycomb-structured rGO film; periodic Voc test; laboratory temperature and relative ambient humidity variation as a function of time; application show (commerical LED and capacitors); performance overview of reported evaporation-induced generators (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c04508/suppl_file/am1c04508_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Self-Powered Analytical Strips Based on Evaporation-Driven Generator for ESDD Detection of Insulator in Electrical Equipment

Multifunctional Conductive Copper Tape-Based Triboelectric Nanogenerator and As a Self-Powered Humidity Sensor

Freestanding silicon nanowires mesh for efficient electricity generation from evaporation-induced water capillary flow

Self-powered Wearable Ultraviolet Index Detector Using a Flexible Thermoelectric Generator

Asymmetrical Electrode Modified by Metal Oxide Nanoparticles for Power Generation Devices from Water Evaporation

Enhancing energy extraction from water microdroplets through synergistic electrokinetic and galvanic effects

Measurements of Equivalent Salt Deposit Density (ESDD) on a Suspension Insulator

Intelligent sensing technology inspired by cell electrophoresis: Dielectric polarization sensor for monitoring the electrical equipment status of IoT nodes

Direct ink writing of fluoropolymer/CNT-based superhydrophobic and corrosion-resistant electrodes for droplet energy harvesters and self-powered electronic skins

Portable self-powered electrochemical aptasensor for ultrasensitive and real-time detection of microcystin-RR based on hydrovoltaic-photothermal coupling effect

Surface Carbonized Natural Wood Via Hydrogen-Oxygen Flame for Electricity Generation from Water Evaporation

Ethylene chlorotrifluoroethylene/hydrogel-based liquid-solid triboelectric nanogenerator driven self-powered MXene-based sensor system for marine environmental monitoring

Harvesting Water‐Evaporation‐Induced Electricity Based on Liquid–Solid Triboelectric Nanogenerator

High‐Performance Dielectric Elastomer Nanogenerator for Efficient Energy Harvesting and Sensing via Alternative Current Method

Printed Honeycomb-Structured Reduced Graphene Oxide Film for Efficient and Continuous Evaporation-Driven Electricity Generation from Salt Solution

Hydrophilic 1T-WS2 Nanosheet Arrays toward Conductive Textiles for High-Efficient and Continuous Hydroelectric Generation and Storage

All Wood‐Based Water Evaporation‐Induced Electricity Generator

Paper‐Based Hydroelectric Generators for Water Evaporation‐Induced Electricity Generation

Self-operating Seawater-Driven Electricity Nanogenerator for Continuous Energy Generation and Storage

An electrochemical paper-based analytical device with facile carbon fiber-sewed electrodes for highly sensitive detection of hydrogen peroxide in real water

A Simple High Power, Fast Response Streaming Potential/Current-Based Electric Nanogenerator Using a Layer of Al2O3 Nanoparticles.