Abstract:Standard procedures for stability assessment of unstable trees are based, among other, on the interpretation of on-site, non-destructive static pulling tests. To this goal, a simple phenomenological equation is usually adopted in professional agronomic practice, and an estimation of the ultimate toppling resistance is extrapolated by fitting the test data, without taking root geometrical parameters and soil mechanical properties into account. From a geotechnical point of view, however, the root plate of a tree plays the role of a "living foundation", and its behaviour under toppling actions (like those produced by intense wind gusts) conceptually corresponds to the mechanical response of shallow foundations under rocking loads. In the paper, several static pulling tests on real-scale trees (some of them have been run until the complete collapse, after some unloading–reloading cycles) and some tests taken from the literature are considered in order to investigate the toppling behaviour. A possible new interpretative equation is proposed and critically compared with the existing one against experimental results. The new equation allows for a mechanically meaningful description of the toppling curve of the tree and accounts for strength and deformability issues. It allows to introduce innovative "performance-based" approaches, which are commonly neglected by practitioners and professional agronomists in this field. Nevertheless, the experimental results show that tree toppling is a complex phenomenon, and capturing its failure condition requires more advanced multi-mechanism models and second-order effects to be accounted for. From a practical point of view, the proposed equation, employed within the same standard interpretative procedure currently adopted in practice for pulling tests, seems to provide conservative estimations of "operational" values of the ultimate toppling resistance, and in perspective, it could be used to significantly optimize—when needed—the design of structural stabilizing interventions on potentially unstable trees.

Centrifuge modelling of root-soil interaction of laterally loaded trees under different loading conditions

Small-scale modelling of root-soil interaction of trees under lateral loads

Centrifuge Modelling for Seismic Response of Single Pile for Wind Turbine Subjected to Lateral Load

Centrifuge model test on suction caisson foundation in soft clay subjected to lateral loads

Centrifuge Modelling of Lateral Loading Behaviour of a “Semi-Rigid” Mono-pile in Soft Clay

Centrifuge Modeling of Monotonic and Cyclic Lateral Behavior of Monopiles in Sand

Centrifuge Modelling of Lateral Cyclic Behaviour of a Tetrapod Piled Jacket in Soft Clay

Centrifuge modelling on tetrapod jacket foundation subjected to lateral loads

Centrifuge Modelling of Suction Anchor Subjected to Inclined Load in Soft Clay

Effect of Loading Rate on Lateral Pile-Soil Interaction in Sand Considering Partially Drained Condition

Large-deformation simulations of root pull-out and breakage using material point method with a multi-level grid

Centrifuge Modeling of Plant Root Reinforcement on Slopes under Drawdown Conditions

Lesson learnt from static pulling tests on trees: an experimental study on toppling behaviour of complex foundations

Centrifuge Model Tests on Ecologically Reinforced Soil Slopes Under Vertical Loading

An experimental study on root-reinforced soil strength via a steel root analogue in unsaturated silty soil

Instability and deformation behaviors of root-reinforced soil under constant shear stress path

Elucidating the impacts of trees on landslide initiation throughout a typhoon: Preferential infiltration, wind load and root reinforcement

Influence of root distribution patterns on soil dynamic characteristics

Numerical simulation and field tests on vertical load bearing behaviour of bored root piles

Centrifuge Modeling of Dynamic Response of High Fill Slope by Using Generalized Scaling Law

Centrifuge Model Design for Axially Loaded Structures under Large Ground Movements