Abstract:An integration hydrogen adsorption benign component such as a metal with an oxygen-containing reactant adsorption benign component such as metal oxide allows for efficient overall water splitting in alkaline solutions and yet remains a considerable challenge. Herein, 5d transition metal oxide WO2 and WO3 (denoted as WOx) nanoparticles are purposely integrated with a porous Ni nanosheet array grown on nickel foam (NF) to design a strongly coupled Ni/WOx/NF porous nanosheet array electrocatalyst. Through the anion exchange of Ni(OH)2 nanosheets with tungstate, followed by hydrogenation treatment, abundant Ni/WOx interfaces with strong coupling interaction are generated. Benefiting from the strong synergies between Ni and WOx and the unique nanostructure, Ni/WOx/NF only requires the overpotentials of 42 mV for hydrogen evolution reaction (HER) and 395.7 mV for oxygen evolution reaction (OER) to achieve the current densities of 10 and 100 mA cm–2, respectively. Furthermore, the Ni/WOx/NF can achieve a current density of 10 mA cm–2 at a low cell voltage of 1.54 V in a two-electrode system. This work opens a novel avenue for the design of high-performance but low-cost electrocatalysts for overall water splitting.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acs.inorgchem.1c00841?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acs.inorgchem.1c00841</a>.XRD patterns of the Ni(OH)2/NF; SEM images of Ni(OH)2/NF; XRD patterns of the NiW/NF-pre; SEM images of NiW/NF-pre; N2 adsorption/desorption isotherms and pore-size distribution of 500-Ni/WOx/NF; SEM images of 500-Ni/NF; SEM images of 500-WOx/NF; XRD patterns of 500-Ni/WOx/NF-m (m = 1, 2, and 4); SEM images of 500-Ni/WOx/NF-m (m = 1, 2, and 4); XRD patterns of T-Ni/WOx/NF-3 (T = 300, 400, and 600 °C); SEM images of T-Ni/WOx/NF-3 (T = 300, 400, and 600 °C); polarization curves of T-Ni/WOx/NF-3 (T = 300, 400, 500, and 600 °C); HER performances of 500-WOx/CC, 500-Ni/CC, and 500-Ni/WOx/CC; CV curves of 500-Ni/WOx/NF-m (m = 1, 2, 3, and 4), 500-Ni/NF, and 500-WOx/NF; calculation formula of TOF; CVs of sample 500-Ni/WOx/NF-3, 500-WOx/NF, and 500-Ni/NF in 0.2 M phosphate buffer (pH = 7) at a scan rate of 50 mV s–1; SEM images of 500-Ni/WOx/NF-3 after the HER stability test of 50 h; EDX spectra of 500-Ni/WOx/NF-3 before and after the HER stability test; high-resolution XPS spectra of Ni 2p, W 4f, and O 1s of 500-Ni/WOx/NF-3 after the HER stability test; polarization curves of T-Ni/WOx/NF-3 (T = 300, 400, 500, and 600 °C); OER performances of 500-WOx/CC, 500-Ni/CC, and 500-Ni/WOx/CC; CV curves of 500-Ni/WOx/NF-m (m = 1, 2, 3, and 4), 500-WOx/NF, and 500-Ni/NF; SEM images of 500-Ni/WOx/NF-3 after the OER stability test of 50 h; high-resolution XPS spectra of Ni 2p, W 4f, and O 1s of 500-Ni/WOx/NF-3 after the OER stability test; and comparisons of the HER and OER performances of recently reported catalysts (<a class="ext-link" href="/doi/suppl/10.1021/acs.inorgchem.1c00841/suppl_file/ic1c00841_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Modulated electronic structure of atomic W-doped NiO/Cr 2 S 3 nanotube heterostructure on nickel foam for enhanced overall water splitting

Co–Ni‐Based Nanotubes/Nanosheets As Efficient Water Splitting Electrocatalysts

Hierarchical NiCo2S4@NiFe LDH Heterostructures Supported on Nickel Foam for Enhanced Overall-Water-Splitting Activity

N, P co-doped Ni/Mo-based multicomponent electrocatalysts in situ decorated on Ni foam for overall water splitting

Synergism of Interface and Electronic Effects: Bifunctional N-Doped-Ni3S2/N-Doped-MoS2 Heteronanowires for Efficient Electrocatalytic Overall Water Splitting.

Crystalline/Amorphous Mo-Ni(OH)2/FexNiy(OH)3x+2y hierarchical nanotubes as efficient electrocatalyst for overall water splitting

Constructing heterolytic cleavage process of water on Ni3N nanosheets through single transition metal doping for ultra-efficient alkaline hydrogen evolution

Hierarchical NiCo2S4@NiMoO4 nanotube arrays on nickel foam as an advanced bifunctional electrocatalyst for efficient overall water splitting

Synergistically Integrating Nickel Porous Nanosheets with 5d Transition Metal Oxides Enabling Efficient Electrocatalytic Overall Water Splitting

Regulating the Electronic Structure and Active Sites in Ni Nanoparticles by Coating N-Doped C Layer and Porous Structure for an Efficient Overall Water Splitting

Promoting the activity of Ni3S2-x/Ni2P fuzzy-like nanorods as a bifunctional electrocatalyst for efficient overall water splitting through dealloying and active site design strategy

Interface engineering and heterometal doping Mo-NiS/Ni(OH)2 for overall water splitting

Fabrication of NiC/MoC/NiMoO4 Heterostructured Nanorod Arrays as Stable Bifunctional Electrocatalysts for Efficient Overall Water Splitting

Nanoarchitectonics of La‐Doped Ni3S2/MoS2 Hetetostructural Electrocatalysts for Water Electrolysis

Vertically oriented Ni-doped MoS2 nanosheets supported on hollow carbon microtubes for enhanced hydrogen evolution reaction and water splitting

Interface engineering of crystalline-amorphous heterostructures with strong electronic interactions for efficient alkaline overall water splitting

Epitaxial Heterogeneous Interfaces on N-NiMoO 4 /NiS 2 Nanowires/Nanosheets to Boost Hydrogen and Oxygen Production for Overall Water Splitting

High efficiency in overall water-splitting via Co-doping heterointerface-rich NiS2/MoS2 nanosheets electrocatalysts

N-doped carbon-coupled nickel nitride species/Ni 2 P heterostructure for enhancing electrochemical overall water splitting performance

In situ evolved NiMo/NiMoO 4 nanorods as a bifunctional catalyst for overall water splitting

Three-Dimensional N-Doped Carbon Nanotube Frameworks on Ni Foam Derived from a Metal-Organic Framework as a Bifunctional Electrocatalyst for Overall Water Splitting