Abstract:A phase-field description of brittle fracture is employed in the reported four-point bending analyses of monolithic and laminated glass plates. Our aims are: (i) to compare different phase-field fracture formulations applied to thin glass plates, (ii) to assess the consequences of the dimensional reduction of the problem and mesh density and refinement, and (iii) to validate for quasi-static loading the time-/temperature-dependent material properties we derived recently for two commonly used polymer foils made of polyvinyl butyral or ethylene-vinyl acetate. As the nonlinear response prior to fracture, typical of the widely used Bourdin–Francfort–Marigo model, can lead to a significant overestimation of the response of thin plates under bending, the numerical study investigates two additional phase-field fracture models providing the linear elastic phase of the stress-strain diagram. The typical values of the critical fracture energy and tensile strength of glass lead to a phase-field length-scale parameter that is challenging to resolve in the numerical simulations. Therefore, we show how to determine the fracture energy concerning the applied dimensional reduction and the value of the length-scale parameter relative to the thickness of the plate. The comparison shows that the phase-field models provide very good agreement with the measured stresses and resistance of laminated glass, despite the fact that only one/two cracks are localised using the quasi-static analysis, whereas multiple cracks evolve during the experiment. It was also observed that the stiffness and resistance of the partially fractured laminated glass can be well approximated using a 2D plane-stress model with initially predefined cracks, which provides a better estimation than the one-glass-layer limit.

Three-stage breakage model for laminated glass plate under low-velocity impact

Soft Impact Response of Laminated Glass Plates

An Analytical Model for Deformation and Damage of Rectangular Laminated Glass under Low-Velocity Impact

Deformation and Damage Mechanisms of Laminated Glass Windows Subjected to High Velocity Soft Impact

An Ordinary State-Based Peridynamic Modeling for Dynamic Fracture of Laminated Glass under Low-Velocity Impact

Impact Fracture Simulation of Laminated Glass Based on Thick Shell Elements and a Cohesive Zone Model

Nonlinear analytical study of structural laminated glass under hard body impact in the pre-crack stage

Experimental and analytical study on the pre-crack impact response of thick multi-layered laminated glass under hard body impact

Applicability Evaluation of Damage Evolution Models in Simulating Repeated Low-Velocity Impact Behavior of Composite Laminates

Experimental study on the gradual fracture of layers in multi-layer laminated glass plates under low-velocity impact

A finite element model for impact simulation with laminated glass

Dynamic Structural Response of Laminated Glass Panels to Blast Loading

Influences of temperature and impacting velocity on dynamic failure of laminated glass: Insights from peridynamic simulations

Modeling And Experimental Studies Of Crack Propagation In Laminated Glass Sheets

Parametric analyses on the impact fracture of laminated glass using the combined finite-discrete element method

Investigation of Dynamic Multi-Cracking Behavior in PVB Laminated Glass Plates

Different Driving Mechanisms of In-Plane Cracking on Two Brittle Layers of Laminated Glass

Investigation on Dynamic Propagation Characteristics of In-Plane Cracks in PVB Laminated Glass Plates

An Experimental Study on the Structural Behaviour of Laminated Glass Members under Combined Axial Compression and In-Plane Bending

Phase-Field Fracture Modelling of Thin Monolithic and Laminated Glass Plates under Quasi-Static Bending

Finite element analysis of dynamic progressive failure properties of GLARE hybrid laminates under low-velocity impact