Abstract:3D printing has become widely used to rapidly prototype and manufacture novel or bespoke objects or replacement components in a wide range of marine industries, engineering, and research. 3D-printed objects are subject to marine biofouling, impacting their operation and longevity. Application of antifouling paints or coatings adds costly and time-consuming steps and may interfere with the function of fine surface features, counteracting some of the benefits of 3D-printing technology. We measured the antifouling performance of two 3D-printing thermoplastics embedded with antifouling biocides to create 3D-printed materials with inherent antifouling properties: 1) polycaprolactone (PCL) mixed with the organic biocide dichlorooctylisothiazolinone (DCOIT) and extruded as 3D-printing filament, and 2) a commercial polylactic acid (PLA) 3D-printing filament with embedded copper powder. Settlement plates printed from these thermoplastics ("PCL-DCOIT" and "PLA-Cu", respectively) and deployed in temperate, coastal marine water for 17 weeks during summer remained free of macrofouling. A biofilm developed, and 16S and 18S rRNA metabarcoding analyses revealed that early stage biofilms (at 5 and 12 weeks) had dramatically altered assemblage structures of both prokaryotes and eukaryotes compared to natural biofilms. The assemblage on PCL-DCOIT had reduced microbial diversity, strong dominance of Proteobacteria and chlorophytes, and almost complete absence of Flavobacteriia, Cyanobacteria, and diatoms. In contrast, the biofilm on PLA-Cu had a dominance of Flavobacteriia over Proteobacteria, and resistance to chlorophytes, yet similar to PCL-DCOIT it resisted Cyanobacteria and diatoms. Such alterations to biofilm microbial assemblages could influence microbial dynamics, biofilm growth, and settlement cues to which biofouler propagules respond. At 17 weeks, the two biocide-embedded thermoplastics completely resisted macrofouling, equally well as three commercial antifouling coatings (Intercept 8500, Hempaguard X7, Hempasil X3); however, PCL-DCOIT was more extensively covered by a microalgal film (79%, evidently chlorophytes) than were the commercial coatings, and PLA-Cu had the most settled detritus (100% cover). Biofilm assemblages on the commercial coatings were investigated for comparison, with PCL-DCOIT standing out due to its almost complete resistance to Flavobacteriia. Thermoplastic 3D-printing filaments with embedded biocides show promise for producing 3D-printed objects with inherent antifouling properties, avoiding or lessening the need to apply antifouling coatings, and possibly extending their service lifetime.

3D printing technology meets marine biofouling: a study on antifouling resin for protecting marine sensors

Construction of corrosion resistant stainless steel mesh and the design for protecting optical window free from biofouling

Growth of marine biofilms and macrofouling organisms on biocide-infused, 3D-printed thermoplastics

Quantifying instant water cleaning efficiency using zinc oxide decorated complex 3D printed porous architectures

Antifouling and antimicrobial 3D printed small household appliances with incorporation of zwitterions and quaternary ammonium compounds

Biomimicking micropatterned surfaces and their effect on marine biofouling.

Pressure-Activatable Liquid Metal Composites Flexible Sensor with Antifouling and Drag Reduction Functional Surface

Enhanced Antifouling Performance with a Synergistic Effect of Self-Renewal Antifouling and Contact Bacteriostasis Via the Ionic Exchange

3D printed porous membrane integrated devices to study the chemoattractant induced behavioural response of aquatic organisms

Marine antifouling behavior of the surfaces modified by dopamine and antibacterial peptide

Design and In Situ Validation of Low-Cost and Easy to Apply Anti-Biofouling Techniques for Oceanographic Continuous Monitoring with Optical Instruments

Application of 3D Printing Technology in Sensor Development for Water Quality Monitoring

Design and Screening of Zwitterionic Polymer Scaffolds for Rapid Underwater Adhesion and Long‐term Antifouling Stability

Synthesis of zinc-based acrylate copolymers and their marine antifouling application

Surface Reconstruction of Silicone-Based Amphiphilic Polymers for Mitigating Marine Biofouling

Sea-trial research on natural product-based antifouling paint applied to different underwater sensor housing materials

A Novel Strategy for Design of Mechanically Robust Antifouling Coatings Via Bifunctional Domain Engineering

Establishment of an antifouling performance index derived from the assessment of biofouling on typical marine sensor materials

Self-Stratified Versatile Coatings for Three-Dimensional Printed Underwater Physical Sensors Applications

Enhanced antifouling strategy with a strong synergistic effect of fluorescent antifouling and contact bacteriostasis using 7-amino-4-methylcoumarin

Materials Selection for Antifouling Systems in Marine Structures