Abstract:Currently, researchers are concerned with preparing β-Ti alloys with low Young's modulus, with biocompatible elements such as Nb, Ta, and Zr. Ti–35Nb–5Ta–7Zr (TNZT) alloy can be considered a well-known β-Ti alloy which is utilised in different biomedical applications owing to its low Young's modulus and high biocompatibility. So, the preparation and characterisation of this alloy were studied. Ti–35Nb–5Ta–7Zr alloy is effectively prepared by powder metallurgy using 800 MPa compacting pressure and 18 h of sintering time (2 h at 500°C and 16 h at 1200°C), where X-ray diffraction, optical microscope analysis, and scanning electron microscope with Energy dispersive X-ray spectroscopy (SEM-EDS) ensure sintering success and true porosity of (23%) ensure the suitability of the used level for the compacting pressure. The Ti–35Nb–5Ta–7Zr samples fabricated by powder metallurgy have comparable mechanical properties and microstructure with those fabricated by the casting method. The high mechanical properties, good wear resistance in SBF solution, and low elastic modulus made this alloy a strong candidate for biomedical applications such as intramedullary nails, surgical plates, and joint replacement. Présentement, les chercheurs s'intéressent à préparer des alliages Ti-β à faible module d'élasticité, avec des éléments biocompatibles tels que Nb, Ta et Zr. On peut considérer l'alliage Ti-35Nb-5Ta-7Zr (TNZT) comme un alliage Ti-β bien connu, qui est utilisé dans des différentes applications biomédicales en raison de son faible module d'élasticité et de sa biocompatibilité élevée. Donc, on a étudié la préparation et la caractérisation de cet alliage. L'alliage Ti-35Nb-5Ta-7Zr est préparé efficacement par la métallurgie des poudres en utilisant une pression de compaction de 800 MPa et 18 heures de temps de frittage (2 heures à 500°C et 16 heures à 1200°C), où la diffraction des rayons X, l'analyse au microscope optique et le microscope électronique à balayage avec spectroscopie à dispersion d'énergie (MEB-EDS) assurent le succès du frittage et une porosité réelle de 23% assure la pertinence du niveau utilisé de la pression de compaction. Les échantillons de Ti-35Nb-5Ta-7Zr fabriqués par la métallurgie des poudres ont des propriétés mécaniques et une microstructure comparables à ceux fabriqués par la méthode de coulée. Les propriétés mécaniques élevées, la bonne résistance à l'usure dans une solution de liquide organique simulé (SBF) et un faible module d'élasticité rendent cet alliage un candidat fort pour des applications biomédicales telles que des clous intramédullaires, des plaques chirurgicales et le remplacement d'articulation.

Characterization of biomedical Ti-35Nb-5Ta-7Zr alloy prepared by powder metallurgy route

Combined First-Principles and Experimental Study on the Microstructure and Mechanical Characteristics of the Multicomponent Additive-Manufactured Ti-35Nb-7Zr-5Ta Alloy

Synthesis and Characterization of a Novel Biocompatible Alloy, Ti-Nb-Zr-Ta-Sn

Alloy Design and Fabrication of Duplex Titanium-Based Alloys by Spark Plasma Sintering for Biomedical Implant Applications

Mechanical, corrosion, nanotribological, and biocompatibility properties of equal channel angular pressed Ti-28Nb-35.4Zr alloys for biomedical applications

Study of a new titanium alloyTi-39Nb-5.1Ta-7.1Zr for biomedical application

Microstructure and Corrosion Resistance of Powder Metallurgical Ti-Nb-Zr-Mg Alloys with Low Modulus for Biomedical Application

Biocompatibility, corrosion, and wear resistance of β titanium alloys for biomedical applications

Mechanical, physical–chemical and biological properties of the new Ti–30Nb–13Ta–5Zr alloy

Fabrication of Biomedical Ti–35Nb–7Zr–5Ta Alloys by Mechanical Alloying and Spark Plasma Sintering

Effect of Silicon Content on the Microstructure Evolution, Mechanical Properties, and Biocompatibility of Β-Type TiNbZrTa Alloys Fabricated by Laser Powder Bed Fusion.

Optimizing the cell compatibility and mechanical properties in TiZrNbTa medium-entropy alloy/β-Ti composites through phase transformation

Nb-Ti-Zr Alloys for Orthopedic Implants

Microstructure Characterization and Property Tailoring of a Biomedical Ti–19Nb–1.5Mo–4Zr–8Sn Alloy

A Β-Type TiNbZr Alloy with Low Modulus and High Strength for Biomedical Applications

Investigation of sliding wear, electrochemical corrosion, and biocompatibility of Ti-Nb alloys for biomedical applications

Microstructural, Biomechanical, and In Vitro Studies of Ti-Nb-Zr Alloys Fabricated by Powder Metallurgy

Tribological Behavior and In‐Vitro Biocompatibility of a Newly Designed TiZrNbMoTa High‐Entropy Alloy

High–Strength Porous TiNbZrTaFe Alloys Fabricated by Sintering of Nanocomposite Powder Precursor with Space Holder Technique

Preparation and characterization of metastable β-type titanium alloys with favorable properties for orthopedic applications

Microstructure and Final Properties of Cold-Rolled Ti-32.5Nb-6.8Zr-2.7Sn-0.3O Biomedical Β Titanium Alloy