Abstract:The earthquake-induced applicability of key components of the existing high-speed railway CRTS II ballastless track-continuous girder bridge system (HSRCCB) is not clear. The fine simulation model of the HSRCCB is developed herein. Latin hypercube sampling is used to consider the uncertainty of ground motion and HSRCCB modeling parameters. Earthquake-induced residual deformation sample database for key components of the HSRCCB under near-field rare earthquakes is constructed. Furthermore, overlimit state analysis and applicability evaluation of bridge key components are performed using the statistical inference method. The characteristic curve of earthquake-induced residual deformation for track key components is developed using the hypothesis testing principle and statistical inference method, and the overlimit state analysis and applicability evaluation are carried out accordingly. The results show that after the near-field rare earthquake, the bearing undergoes large transverse residual deformation, as well as a longitudinal residual deformation. The box girder has an obvious transverse offset; However, the transverse and longitudinal residual deformation of track key components is smaller than that of the bearing. The maximum overlimit rate of residual deformation of fixed bearing and sliding bearing is 98%, indicating that most of the bearing gets destroyed during the process. Earthquake-induced bending and shear failure do not commonly occur at the abutment/pier bottom. The longitudinal residual deformation overlimit rate of the sliding layer and friction plate is relatively large, reaching more than 82% and 47%, respectively. Shear slots, shear steel bars, and fasteners are not easy to overrun. The overlimit rate of transverse residual deformation of lateral blocks is low, CA mortar and fasteners residual deformation overlimit rate tends to be 0. The bearing is no longer applicable. The shear force and bending moment at the abutment/pier bottom, shear slots, shear steel bars, CA mortar, and fasteners applicability all meet the requirements, while the sliding layer, friction plate, and lateral blocks are difficult to meet the applicability requirements. Among them, the applicability index value of the longitudinal residual deformation of the sliding layer is as high as 181.94, indicating that the sliding layer is far from meeting the seismic design requirements of near-field rare earthquakes. Thus, attention should be paid to the seismic design.

Damaging effects of earth fissures on high-speed railway bridges: Insights from physical experiments and numerical simulations

Effect of Rail Restraints on Seismic Responses of Cushioning Railway Bridges

Model test study on the deformation and failure mechanism of high-speed railway subgrade obliquely crossing ground fissure zones

Navigating the depths: Experimental study on the influence of ground fissures on metro shield tunnels considering different intersection angles

Damage Analysis of High-Speed Railway Bridge-Track System with Unequal Pier Heights Under Near-Fault Earthquake Based on FK-FE Method

Model test study on the dynamic response of high-speed railway subgrade crossing ground fissure zone

Full-Scale Experimental Study on the Effect of Ground Surcharge on the Stress and Deformation of Shield Tunnels

Field Measurement Analysis of the Influence of Double Shield Tunnel Construction on Reinforced Bridge

A novel evaluation of train running safety on the HSR bridges under earthquakes based on the observed track deformation rate

Applicability of existing CRTS II ballastless track – Continuous girder bridge system under near-field transverse rare earthquake

Seismic scenario reproduction and damage mechanism analysis of Liuhuanggou Bridge under near-fault earthquake

Effect of near-fault vertical seismic excitation on running safety of trains on high-speed railway bridges

Multi-defect risk assessment in high-speed rail subgrade infrastructure in China

Risk Prediction of Rock Bursts and Large Deformations in YL Tunnel of the Chongqing–Kunming High-Speed Railway

Seismic response of benchmark high-speed rail (HSR) round-ended rectangular-shaped cross-section solid (RERSCSS) concrete pier based on the shaking table tests

Ground Disturbance and Vibration Effects Under the Action of Subway Shield Tunneling

Study on Damage Evolution of Tunnel Lining under Strike-Slip Fault Movements

Shaking-table tests on seismic behavior of subway station intersecting the ground fissure

Numerical Analysis on the Structure Type and Mechanical Response of Tunnel Crossing Active Reverse Fault

Experimental study on the damage performance and forced response of concrete lining in fault-crossing tunnel

Effect of Lateral Deformations of a Simply-Supported Beam Bridge on High-Speed Railway Traffic Safety under Earthquake Action