Abstract:Bacterial nanocellulose (BNC) is an exopolysaccharide produced by certain acetic acid bacteria. It has high crystallinity, high mechanical strength, high purity and high water-holding capacity. These properties make it useful in making artificial skin (1), electronic paper, composite reinforcement, development of food and cosmetic applications (2). The cost of fermentation media is believed to contribute significantly to the operational costs, especially if synthetic commercial media are used. Hence, much research on BNC production using low-cost substrates has been done focusing on lowering the production costs (3). Also, to meet the requirement for industrial applications, effective large-scale BNC production systems need to be developed, which involves improving the fermentation conditions and identifying high yield BNCproducing strains (4). However, as with many fermentation systems, while promoting the recycling of low value-added products, the use of complex substrates may in fact represent a bottleneck in the BNC fermentation processes. Some of these substrates present, comparatively to synthetic nutrients, high chemical oxygen demand (COD), total and volatile solids (TS and VS), total nitrogen (TN), antimicrobial components (such as phenols) Consequently, these alternative substrates may place an economic problem either downhill, due to the need for wastewaters treatments and/or, uphill, due to the need of substrates pre-treatment. In this work, the optimization of alternative BNC culture medium (Molasses-Corn Steep Liquor, MOL-CSL), using Response surface methodology – central composite design was used to evaluate the effect of inexpensive and widely available nutrients sources, namely MOL, ethanol (EtOH), CSL and ammonium sulphate on BNC production yield under static culture by komagataeibacter xylinus BPR 2001. The optimized parameters for maximum BNC production were: % (m/v): MOL 5.38, CSL 1.91, ammonium sulphate 0.63, disodium phosphate 0.270, citric acid 0.115 and ethanol 1.38 % (v/v). The maximum BNC production yield were 7.5 ± 0.54 g/L versus 1.79 ± 0.04 g/L for MOL-CSL and synthetic medium (HS-EtOH) culture medium, respectively. The resulting wastewater from each culture medium was characterized regarding COD, TN, TS and VS, leading to the conclusion that the wastewaters generated using MOL-CSL are more heavily charged with organic matter, increasing the final costs of BNC production due to the higher costs associated to wastewater treatment. Anaerobic digestion (AD) was studied for wastewater treatment and biogas production from the wastewaters of the BNC fermentation and purification process. Finally, a preliminary Life Cycle Assessment of BNC production was performed and will be presented. Acknowledgements: This study was supported by the Portuguese Foundation for Science and Technology (FCT) (PhD grant SFRH/BD/89547/2012 attributed to Ana Cristina Rodrigues and under the scope of the strategic funding of UID/BIO/04469 unit and COMPETE 2020 (POCI-01-0145-FEDER-006684) and 4th INTERNATIONAL SYMPOSIUM ON BACTERIAL NANOCELLULOSE 3-4th October, 2019 Almeida Garrett Library Auditorium, Porto-Portugal Multibiorefinery PAC (SAICTPAC/0040/2015) and BioTecNorte operation (NORTE-01-0145-FEDER000004) funded by the European Regional Development Fund under the scope of Norte2020 Programa Operacional Regional do Norte and project no 003435: “BUILD – Bacterial cellulose Leather”, funded by Fundo Europeu de Desenvolvimento Regional (FEDER) through the Programa Operacional do Regional do Norte (NORTE 2020) The authors also acknowledge the financial support of the FCT (ESF) through the grant given to J.V. Oliveira (SFRH/BD/111911/2015).

Ecologically Modified Leather of Bacterial Origin

Design of a Naturally Dyed and Waterproof Biotechnological Leather from Reconstituted Cellulose

Biocomposites from Polylactic Acid and Bacterial Cellulose Nanofibers Obtained by Mechanical Treatment

Bacterial nanocellulose in papermaking

Chemical Modification of Bacterial Cellulose for the Development of an Antibacterial Wound Dressing

Life Cycle Environmental Impacts of a Biobased Acrylic Polymer for Leather Production

Reproducibility of Bacterial Cellulose Nanofibers Over Sub-Cultured Generations for the Development of Novel Textiles

On to the impact of low cost substrates for BNC production

Bacterial Nanocellulose toward Green Cosmetics: Recent Progresses and Challenges

Biofilm inspired fabrication of functional bacterial cellulose through ex-situ and in-situ approaches

Targeting Bacterial Nanocellulose Properties through Tailored Downstream Techniques

Hydrogel bacterial cellulose: a path to improved materials for new eco-friendly textiles

SCOBY Cellulose Modified with Apple Powder-Biomaterial with Functional Characteristics

Catalyst-Free Crosslinking Modification of Nata-de-Coco-Based Bacterial Cellulose Nanofibres Using Citric Acid for Biomedical Applications

Development of sustainable ternary bionanocomposite film reinforced with nanocellulose and nanoclay for microbial efficacy

Bacterial Cellulose—A Remarkable Polymer as a Source for Biomaterials Tailoring

Characterization of Bioactive Colored Materials Produced from Bacterial Cellulose and Bacterial Pigments

Bacterial Nanocellulose—A Biobased Polymer for Active and Intelligent Food Packaging Applications: Recent Advances and Developments

Antibacterial Films Made of Bacterial Cellulose

Bacterial Nanocellulose Fortified with Antimicrobial and Anti-Inflammatory Natural Products from Chelidonium majus Plant Cell Cultures

Three‐phase bio‐nanocomposite natural‐rubber‐based microfibers reinforced with cellulose nanowhiskers and 45S5 bioglass obtained by solution blow spinning