Abstract:Piezoelectric materials are defined by their ability to display a charge across their surface in response to mechanical strain, making them great for use in sensing applications. Such applications include pressure sensors, medical devices, energy harvesting and structural health monitoring (SHM). SHM describes the process of using a systematic approach to identify damage in engineering infrastructure. A method of SHM that uses piezoelectric wafers connected directly to the structure has become increasingly popular. An investigation of a novel pitch-catch method of determining instrumentation quality of piezoelectric wafer active sensors (PWASs) used in SHM was conducted as well as an investigation into the effects of defects in piezoelectric sensors and sensor bonding on the sensor response. This pitch-catch method was able to verify defect-less instrumentation quality of pristinely bonded PWASs. Additionally, the pitch-catch method was compared with the electromechanical impedance method in determining defects in piezoelectric sensor instrumentation. Using the pitch-catch method, it was found that defective instrumentation resulted in decreasing amplitude of received and transmitted signals as well as changes in the frequency spectrums of the signals, such as the elimination of high frequency peaks in those with defects in the bonding layer and an increased amplitude of around 600 kHz for a broken PWAS. The electromechanical impedance method concluded that bonding layer defects increase the primary frequency peak's amplitude and cause a downward frequency shift in both the primary and secondary frequency peaks in the impedance spectrum, while a broken sensor has the primary peak amplitude reduced while shifting upward and nearly eliminating the secondary peak.

A piezoelectric sensor with high accuracy and reduced measurement error

Piezoelectric Sensing Techniques in Structural Health Monitoring: A State-of-the-Art Review

A Soft Piezoresistive Pressure Sensor Based on Porous Conductive CB/PDMS Composite

Simulation and Design of Piezoelectric Microcantilever Chemical Sensors

Exploring the performance of piezoresistive accelerometers: modelling, validation, and optimization

Study of piezo-induced surface vibration in solids using atomic force probe

Characterization of a Piezoelectric Acoustic Sensor Fabricated for Low-Frequency Applications: A Comparative Study of Three Methods

Design And Simulation Of A Novel Piezoresistive Accelerometer For High Accuracy And Overload Ability

Diagonal Piezoelectric Sensors on Cylindrical Shells

Piezoelectric Sensors for Real-time Monitoring and Quality Control in Additive Manufacturing

Piezothermoelasticity and Precision Control of Piezoelectric Systems: Theory and Finite Element Analysis

Development of a Novel Strategy Based on In-Process Compensation of Charge Leakage for Static Force Measurement by Piezoelectric Force Sensors

Piezoelectric Sensors and Sensor Materials

High-Pressure Sensor With High Sensitivity and High Accuracy for Full Ocean Depth Measurements

Study on a High-Precision Piezoelectric Resonators Quartz Crystal Temperature Sensor by Means of Three-Dimensional Finite Element Method

Ultra-High Sensitivity Anisotropic Piezoelectric Sensors for Structural Health Monitoring and Robotic Perception

Piezoelectric Wafer Active Sensor Transducers for Acoustic Emission Applications

Modelling and Characterisation of a Micromachined Resonant Pressure Sensor with Piezoelectric Excitation and Sensing

Analytical Model of the Piezoresistive Behavior of Highly Compressible Sensors Made of Microporous Nanocomposites

Analysis and research of piezoelectric dynamic weighing sensor

New Solid-State Acoustic Motion Sensors: Sensing Potential Estimation for Different Piezo Plate Materials