Abstract:Threads of colloidal dispersions can be formed in microfluidic channel systems and are often used for analytical purposes or to assemble macroscopic structures from colloidal particles. Here, we report a combined experimental and numerical study of thread formation in channel systems with varying geometry. In the reference flow-focusing configuration, the sheath flows impinge the core flow orthogonally while in four other channel configurations, the sheath flows impinge the core flow at different confluence angles, which are both positive and negative with respect to the reference sheath direction. Tomographic measurements of the thread development are made using optical coherence tomography (OCT) and are compared to numerically simulated 3D data. The numerical simulations performed with an immiscible fluid solver show good agreement with the experiments in terms of 3D thread shapes, wetted region morphologies, and velocity fields provided an ultralow interfacial tension is applied between the low viscosity (solvent) sheath flows and the high viscosity (dispersion) core flow. Such an ultralow interfacial tension is motivated by the so-called Korteweg stresses induced as a result of the concentration gradient between two miscible fluids in nonequilibrium state. These stresses mimic the effect of interfacial tension, and are often modeled as an effective interfacial tension (EIT), an approach chosen in the present work as well. The value of interfacial tension applied in the simulations was determined through an optimization procedure and compares well with a value deduced from a scaling analysis utilizing the downstream development of experimentally determined thread shape. The experimental and numerical results show that for channel configurations with modest deviations from orthogonal sheath flows, the effect on the thread is similar regardless of whether the sheath flows are co- or counterflowing the core flow. In fact, for these cases, the effect of co- and counterflowing sheath flows can be reproduced with orthogonal sheath flows, if the sheath channel width is increased. However, for channel configurations with larger deviations from orthogonal sheath flows, the effects on the thread are direction dependent. The one-to-one comparison and analysis of numerical and experimental results bring useful insights to understand the behavior of miscible systems involving high-viscosity contrast fluids. These key results provide the foundation to tune the flow-focusing for specific applications, for example in tailoring the assembly of nanostructured materials. https://doi.org/10.1103/PhysRevFluids.6.114001 Published by the American Physical Society under the terms of the Creative Commons Attribution 4.0 International license. Further distribution of this work must maintain attribution to the author(s) and the published article's title, journal citation, and DOI. Funded by Bibsam. Published by the American Physical Society

Variation of focusing patterns of laterally migrating particles in a square-tube flow due to non-Newtonian elastic force

Nanoscale fluid flows in the vicinity of patterned surfaces

Elasto-Inertial Focusing Mechanisms of Particles in Shear-Thinning Viscoelastic Fluid in Rectangular Microchannels

Particle Focusing in a Straight Microchannel with Non-Rectangular Cross-Section

Inertial Focusing and Rotating Characteristics of Elliptical and Rectangular Particle Pairs in Channel Flow

On the Polydisperse Particle Migration and Formation of Chains in a Square Channel Flow of Non-Newtonian Fluids

Microfluidic pressure-driven flow of a pair of deformable particles suspended in Newtonian and viscoelastic media: A numerical study

Finite-size spherical particles in a square duct flow of an elastoviscoplastic fluid: an experimental study

Rigid Spheroid Migration in Square Channel Flow of Power-Law Fluids

Inertial Focusing of Spherical Particles: The Effects of Rotational Motion

Elasto-inertial focusing and rotating characteristics of ellipsoidal particles in a square channel flow of Oldroyd-B viscoelastic fluids

Deciphering viscoelastic cell manipulation in rectangular microchannels

Formation of colloidal threads in geometrically varying flow-focusing channels

Dynamics of an Oblate Spheroidal Particle in a Square Duct Filled with Viscoelastic Fluids

Elasto-inertial focusing and particle migration in high aspect ratio microchannels for high-throughput separation

Synchronous oscillatory electro-inertial focusing of microparticles

Spreading and engulfment of a viscoelastic film onto a Newtonian droplet

Tunable Particle Focusing in a Straight Channel with Symmetric Semicircle Obstacle Arrays Using Electrophoresis-Modified Inertial Effects

Flow Pattern Variations of Viscoelastic Fluid Flows in Three‐dimensional Branching Channel

Viscoelastic Liquid Film Flowing Down A Flexible Tube