Dan Li,Chongning Li,Haolin Wang,Jiao Li,Yuxiang Zhao,Xin Jiang,Guiqing Wen,Aihui Liang,Zhiliang Jiang
Abstract:Bisphenol A (BPA), as a typical endocrine disruptor, poses a serious threat to human health. Therefore, it is urgent to establish a rapid, sensitive, and simple method for the determination of BPA. In this paper, based on the aptamer-mediated single-atom Fe carbon dot catalyst (SA<sub>Fe</sub>) catalyzing the HAuCl<sub>4</sub>-ethylene glycol (EG) nanoreaction, a new SERS/RRS di-mode detection method for BPA was established. The results show that SA<sub>Fe</sub> exhibits a strong catalytic effect on the HAuCl<sub>4</sub>-EG nanoreaction, which could generate purple gold nanoparticles (AuNPs) with resonance Rayleigh scattering (RRS) signals and surface-enhanced Raman scattering (SERS) effects. After the addition of BPA aptamer (Apt), it could encapsulate SA<sub>Fe</sub> through intermolecular interaction, thus inhibiting its catalytic action, resulting in the reduction of AuNPs generated and the decrease of RRS and SERS signals of the system. With the addition of BPA, Apt was specifically combined with BPA, and SA<sub>Fe</sub> was re-released to restore the catalytic ability; the generated AuNPs increased. As a result of this RRS and SERS signals of the system recovered, and their increment was linear with the concentration of BPA. Thus, the quantification of 0.1–4.0 nM (RRS) and 0.1–12.0 nM (SERS) BPA was realized, and the detection limits were 0.08 nM and 0.03 nM, respectively. At the same time, we used molecular spectroscopy and electron microscopy to study the SA<sub>Fe</sub>-HAuCl<sub>4</sub>-ethylene glycol indicator reaction, and proposed a reasonable SA<sub>Fe</sub> catalytic reaction mechanism.
What problem does this paper attempt to address?
The problem that this paper attempts to solve is to establish a fast, sensitive and simple method for determining the content of bisphenol A (BPA). As a typical endocrine disruptor, BPA poses a serious threat to human health. Therefore, there is an urgent need for a method that can detect BPA quickly and sensitively. This paper proposes a chloroauric acid - ethylene glycol nano - reaction catalyzed by single - atom iron catalyst (SA Fe), combined with surface - enhanced Raman scattering (SERS) and resonance Rayleigh scattering (RRS) dual - mode detection methods for the quantitative analysis of BPA.
### Research Background and Objectives
1. **Research Background**:
- Bisphenol A (BPA) is a common endocrine disruptor, widely used in industrial raw materials, food storage and packaging materials, water pipes, bottle caps, tableware and microwave oven utensils, etc.
- BPA will enter the human body through food during heating, sterilization and washing processes, threatening health.
- Current BPA detection methods include absorption spectroscopy, fluorescence method, electrochemistry method and SERS method. Although these methods have high accuracy and stability, due to high cost, complex sample preparation and the need for professional training of operators, they are not suitable for rapid on - site detection of complex actual samples.
2. **Research Objectives**:
- Establish a fast, sensitive and simple BPA detection method.
- Utilize the chloroauric acid - ethylene glycol nano - reaction catalyzed by single - atom iron catalyst (SA Fe), combined with SERS and RRS dual - mode detection methods to improve the sensitivity and reproducibility of detection.
### Main Innovation Points
1. **Preparation of Single - Atom Iron Catalyst (SA Fe)**:
- Using Ferrocene (Fer) as a single precursor, a stable and highly catalytic SA Fe nano - sol was prepared by hydrothermal method.
- SA Fe has a strong catalytic effect and can effectively promote the chloroauric acid - ethylene glycol nano - reaction to generate purple gold nanoparticles (AuNPs).
2. **SERS and RRS Dual - Mode Detection Methods**:
- By adding BPA aptamer (Apt), Apt can wrap SA Fe through intermolecular interactions, inhibiting its catalytic activity, resulting in a decrease in the generated AuNPs and a reduction in RRS and SERS signals.
- After adding BPA, Apt specifically binds to BPA, releasing SA Fe, restoring its catalytic ability, generating more AuNPs, and the RRS and SERS signals are restored, and the increment is linearly related to the BPA concentration.
3. **Detection Limit and Linear Range**:
- Through the RRS method, the quantitative detection of 0.1 - 4.0 nM BPA was achieved, and the detection limit was 0.08 nM.
- Through the SERS method, the quantitative detection of 0.1 - 12.0 nM BPA was achieved, and the detection limit was 0.03 nM.
### Experimental Methods
- **Reagents and Instruments**:
- All required reagents were purchased from Shantou Xilong Science Co., Ltd. and Sinopharm Chemical Reagent Co., Ltd.
- A Hitachi F - 7000 fluorescence spectrophotometer and a TU - 1901 double - beam ultraviolet - visible spectrophotometer were used to obtain RRS and absorption spectra respectively.
- A DXR intelligent Raman spectrometer was used to obtain SERS spectra.
- **Experimental Steps**:
- Prepare single - atom iron catalyst (SA Fe), silver nanoparticles (AgNPs) and TMB oxide (TMB OX).
- In a 5.0 mL test tube, successively add 80 μL of 0.1 μmol/L Apt, a certain concentration of BPA and 400 μL of 4 μg/mL SA Fe, and let stand for 20 minutes.
- Subsequently, add 150 μL of 1.12 g/mL EG, 60 μL of 0.01 mol/L HCl and 80 μL of 1 mg/mL HAuCl₄, and dilute to 2.0 mL.
- After reacting in an 80 °C water bath for 30 minutes, terminate the reaction with ice water, and add 50 μL of 0.2 mmol/L TMB OX or 70 μL of 10 μmol/L VB4R.
- Use a fluorescence spectrophotometer to scan the solution to obtain the RRS spectrum.
- Use a DXR intelligent Raman spectrometer to obtain the SERS spectrum.
### Results and Discussion
- **Analysis Principle**:
- RRS and SERS signals are respectively proportional to the concentration of AuNPs.