Abstract:PEO-based solid electrolytes are eagerly anticipated for being explored in batteries with remarkable performance. Their narrower electrochemical window and weak mechanical strength, however, limit the potential for wide application in safe and high-capacity electronic devices. Herein, a self-healing solid-state electrolyte () is fabricated by the incorporation of an imidazolium-based polymerized ionic liquid (poly(ethylene glycol) monomethacrylate (PEGMA)) block polymer into PEO, and the influence of copolymer configuration on electrochemical performances of the system is investigated in-depth. In addition to reducing the crystallinity of PEO, an inimitable orderly and orderless microphase separation structure is introduced in , which brings about a "green fast track" for Li-ion migration. This contributes to a lithium-ion transference number of 0.63 that is an unsurpassed level. The electrochemical stability window of the optimized can achieve 5.0 V (vs Li+/Li). As a result, the capacity and endurance discharge performances for based cells are significantly improved. Moreover, the bountiful charged ions on the scaffold endue the electrolyte with generous interactions, conferring the predominant adhesiveness toward lithium metal (the hanging weight = 200 g) and standout self-healing ability (recovering time <30 min, 60 °C). The restriction toward lithium dendrite is thus enhanced. The laminate polymer battery presents ascendant antifolding deformation ability and still exhibits good electrochemical performances after reiterative damage. In combination with the high flame retardancy of polymerized ionic liquid, this work affords a splendid idea for an emerging power supply battery.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acssuschemeng.1c08306.1H NMR spectra, FT-IR spectra, GPC curves, XRD patterns, TG curves, DSC curves, stress–strain curve, chronoamperometry profile and the AC impedance spectra, polarization curves, comparison of electrochemical capabilities of PEO-based electrolytes, results of SAXS tests, a sketch map of the self-repairing process, the local magnification of the infrared spectrum of the samples at 1700–950 cm–1, the Li+ conductivity for SPE with various proportion of LITFSI, and the Li+ transfer mechanism of PEO SPE (PDF)This article has not yet been cited by other publications.

Highly Stretchable and Elastic Polymer Electrolytes with High Ionic Conductivity and Li‐ion Transference Number for High‐Rate Lithium Batteries

Porous polymer electrolytes with high ionic conductivity and good mechanical property for rechargeable batteries

Highly elastic and mechanically robust polymer electrolytes with high ionic conductivity and adhesiveness for high-performance lithium metal batteries

A Stretchable and Safe Polymer Electrolyte with a Protecting-Layer Strategy for Solid-State Lithium Metal Batteries

Novel PEO-based Solid Polymer Electrolyte with High Elasticity and High Ionic Conductivity for Room Temperature Lithium Metal Batteries

Metal‐Organic Framework‐Derived Elastic Solid Polymer Electrolytes Enabled by Covalent Crosslinking for High‐Performance Lithium Metal Batteries

Poly(ionic liquid)@PEGMA Block Polymer Initiated Microphase Separation Architecture in Poly(ethylene oxide)-Based Solid-State Polymer Electrolyte for Flexible and Self-Healing Lithium Batteries

A Cellulose/Polyethylene Oxide Gel Polymer Electrolyte with Enhanced Mechanical Strength and High Ionic Conductivity for Lithium‐Ion Batteries

A Stretchable and Highly Conductive Sulfonic Pendent Single-Ion Polymer Electrolyte Derived from Multifunctional Tri-Block Polyether

A stretchable all-solid-state polymer electrolyte with decoupled ion transport and mechanical supporting networks to achieve high and stable ion-conductivity

Diethylenetriaminepentaacetic Acid-based Conducting Solid Polymer Electrolytes Impede Lithium Dendrites and Impart Antioxidant Capacity in Lithium-Ion Batteries

Gel Polymer Electrolytes Based on an Interconnected Porous Matrix Functionalized with Poly(ethylene Glycol) Brushes Showing High Lithium Transference Numbers for High Charging-Rate Lithium Ion Batteries

Porous Polyamide Skeleton-Reinforced Solid-State Electrolyte: Enhanced Flexibility, Safety, and Electrochemical Performance

Elastomeric Electrolyte for High Capacity and Long‐Cycle‐Life Solid‐State Lithium Metal Battery

A Fibrotic Poly (ethylene Oxide) Polymer Electrolyte with High Ionic Conductivity for Stable Lithium Metal Batteries

Conducting Composite Polymer‐Based Solid‐State Electrolyte with High Ion Conductivity via Amorphous Condensed Structure and Multiple Li+ Transport Channels

Poly(Ether-Ester)-Based Solid Polymer Electrolytes with High Li-Ion Transference Number for High Voltage All-Solid-State Lithium Metal Batteries

Exploring High Li + Transference Number Solid-State Electrolytes Based on a Poly(ε-caprolactone) Polymer Matrix with Efficient Lithium Salt Dissociation for Applications in Lithium-Metal Batteries

PVDF-HFP based polymer electrolytes with high Li+ transference number enhancing the cycling performance and rate capability of lithium metal batteries

A high ion-conducting, self-healing and nonflammable polymer electrolyte with dynamic imine bonds for dendrite-free lithium metal batteries

Built-in elasticity-rigidity balanced polymer electrolyte in solid-state Li-batteries with high-loading cathode