Abstract:Schematic representation of the procedure used to prepare Hybrid composites and their Flexural results. This study aims to investigate the mechanical properties of natural fiber hybrid composites, specifically those based on jute and bamboo fibers. Jute fibers made in the form of highly scattered mesh and fine‐meshed bamboo mat were selected as reinforcing materials. The highly scattered meshed jute fabric composite showed poor mechanical properties owing to resin agglomeration, leading to the brittle fracture of the composite before elongation. In contrast, the randomly oriented fine‐meshed bamboo fabric performed better in terms of both mechanical properties and strain energy absorption under the same loading conditions. Hybridization with fine bamboo mesh fibers can be a solution to improve the mechanical properties of jute fabric composites. The tensile, flexural, and in‐plane shear properties of the composites are investigated in our study. We found that hybridizing a fine‐meshed bamboo mat with jute fabric resulted in an improved mechanical performance of the composite. Composite panels have been manufactured using vacuum assisted resin transfer molding (VARTM). Experimental and numerical methods have been used to investigate the flexural behavior. Of the stacking sequences considered, the (J/B4/J) stacking showed the highest flexural strength (141.1 Mpa) and the (B2/J2/B2) 2/2 stacking sequence showed the minimum flexural strength. The alternating stacking sequence (B/J/B/J/B/J) exhibited intermediate properties. The randomly oriented bamboo fabric near the neutral axis enhanced the properties of the hybridized composite. This was verified numerically using the ANSYS ACP software. Highlights Mechanical behavior of Hybrid composite of two natural fibers was investigated. Vacuum assisted resin transfer molding was used to manufacture composite panels. Tensile, in plane shear, 3 point flexural tests and SEM micro analysis were done. FEA was used to validate and compare the experimental and numerical results. Resin agglomeration was improved by fibers with better resin impregnation property.

Mechanical behaviour analysis for banana/coir natural fiber hybrid epoxy composites through experimental modelling

Multi-Scale Modelling of Long-Term Mechanical Behaviour in Polymer Composite Laminates with Woven Fibre Architecture

Optimization of mechanical properties of bamboo fiber reinforced epoxy hybrid nano composites by response surface methodology

Evaluation of Acoustic and Structural Behavior of Banana Fiber Reinforced Polymer Composites

Mechanical behavior of banana fiber polymer composite

Investigation on mechanical and biodegradable behavior of banana/betel nut shell fiber reinforced epoxy composites

Wear Properties and Post-Moisture Absorption Mechanical Behavior of Kenaf/Banana-Fiber-Reinforced Epoxy Composites

Investigation on Mechanical Properties of Bamboo and Coconut Fiber with Epoxy Hybrid Polymer Composite

Tensile, compressive, and fracture behavior of Habeshian chopped banana/epoxy core sandwich woven banana composite

Mechanical, microstructure, and dynamic mechanical analysis of nano-shell and plant fiber hybrid biocomposite

Exploration of Mechanical Attributes, Thermal Behaviors and Atomic Force Analysis of Alkali Treated Hybrid Polyester Composites for an Engineering Application

Thermo-mechanical and viscoelastic behavior of microwave-processed sisal and banana hybrid composite laminates

Modeling and optimization of the manufacturing parameters of a hybrid fiber reinforced polymer composite PxGyEz

Experimental Investigation on Volume Fraction of Mechanical and Physical Properties of Flax and Bamboo Fibers Reinforced Hybrid Epoxy Composites

Mechanical and Thermal Characterization of Bamboo and Interlaminar Hybrid Bamboo/Synthetic Fibre-Reinforced Epoxy Composites

Comparative Analysis on the Elastic Behavior of Composite Materials Based on Plant Fibers: Bamboo / Epoxy and Coconut / Epoxy

Development of hybrid green composites by dual natural fibers (jute/bamboo) reinforcement and investigation of their mechanical behavior

Experimental investigation on mechanical and tribological analysis of pineapple leaf ( Ananas comosus ) and sisal ( Agave sisalana ) fibers reinforced hybrid epoxy composites

Tensile mechanical performance of natural/natural fiber reinforced hybrid bio-composite materials – A statistical approach

Mechanical characterization of jute/carbon hybrid epoxy composites

Dynamic Mechanical Analysis of Banyan/Ramie Fibers Reinforced with Nanoparticle Hybrid Polymer Composite