Abstract:The microstructures and mechanical properties of Al-Si-Mg-Cu-Mn alloys that were squeeze-casted with varying La-Ce mixed rare earth content were analyzed by testing tensile strength and hardness and examining microstructures using various methods such as the optical microscopy, scanning electron microscopy, energy dispersive spectrum spectroscopy, and image analysis. The experimental results revealed that the elongation was affected by the iron content and the Chinese script iron phase showed less damage to the elongation compared to other blocky iron phases. The rare earth element Ce reacts with Al 2 O 3 to form Ce 2 O 3 , which can act as a heterogeneous nucleating agent for α-Fe. This is because of the two-dimensional lattice mismatch between the and , which is specifically 4.5%, which is less than 12%. As the amount of α-Fe increases, the Fe content around the growth of the iron phase decreases. Meanwhile, the rare earth adsorbed on the iron phase would inhibit preferential growth and promote isotropic growth. With an increase in mixed rare earth content, the Chinese script iron phase would transform into a round and fine blocky shape. As a result, the fracture mode shifted from a combination of ductile and brittle fracture to a brittle fracture, accompanied by a transition from transgranular cleavage to transgranular–intergranular cleavage. At a mixed rare earth content of 0.07%, the material exhibited the best comprehensive properties after heat treatment, with a tensile strength of 371.7 MPa, yield strength of 285.7 MPa, and elongation of 4.2%. When the rare earth addition was 0.37%, the hardness of 6066 aluminum alloy reached the maximum value of 123.5 HBW.

Rare Earth Lanthanum and Manganese Mixed Al-Si Alloys: An Electromagnetic Stirring Approach for Improved Metallurgical and Mechanical Properties

The Influence of the Combined Addition of La–Ce Mixed Rare Earths and Sr on the Microstructure and Mechanical Properties of AlSi10MnMg Alloy

Effect of Electromagnetic Stirring on Fine Grain Formation and Tensile Property Improvement for Fe-Ni Superalloy

A study of electromagnetic characteristics of Fe-Si-Al magnetic alloy

Numerical Simulation and Experimental Investigation of the Preparation of Aluminium Alloy 2A50 Semi-Solid Billet by Electromagnetic Stirring.

Numerical and Experimental Study on Melt Treatment for Large-Volume 7075 Alloy by a Modified Annular Electromagnetic Stirring

Effects of electromagnetic stirring and subsequent homogenization treatment on the microstructure and mechanical properties of Al70Zn10Mg10Cu5Si5 multi-component alloy

Study on Strengthening and Toughening of Mechanical Properties of Mg-Li Alloy by Adding Non-Rare-Earth Elements Al and Si

Effects of A-EMS on Microstructure and Mechanical Properties of DC Casting Al-10Si-1.1Ni Alloy

Effect of electromagnetic stirring on degassing and mechanical properties of M174 heat-resistant alloy

Microstructural evolution caused by electromagnetic stirring in superheated AlSi7Mg alloys

High solid-solution strengthening mechanism of a novel aluminum-lithium alloy fabricated by electromagnetic near-net shape technology

Study on the synergistic effect of electromagnetic stirring and mechanical reduction on the improvement of the internal homogeneity of high-carbon steel billet

Advancements in Aluminum Matrix Composites: A Comprehensive Review on the Mechanical and Microstructural Attributes of Rare Earth Elements (REEs) and Rare Earth Oxides (REOs) Doped Materials

Influence of Electromagnetic Stirring on Structure of A356 Melt and Its Solidification Behavior

Influence of Samarium (Sm) Addition on Mechanical and Tribological Performance of the Al–Mg Alloy AA5083

Effects of Melt Treatments and Electromagnetic Stirring on the Microstructures of AZ91D Alloy

Development of rare earth element-based hybrid aluminium composites using stir casting process

Effect of Mixed Rare Earth on the Iron Phase and Tensile Properties in Squeeze Casting 6066 Aluminum Alloys

Effect Of Coupled Annular Electromagnetic Stirring And Intercooling On The Microstructures Macrosegregation And Properties Of Large-Sized 2219 Aluminum Alloy Billets

Achieving Outstanding Combination of Strength and Ductility of the Al-Mg-Li Alloy by Cold Rolling Combined with Electropulsing Assisted Treatment