Abstract:Compliant leg function found during bouncy gaits in humans and animals can be considered a role model for designing and controlling bioinspired robots and assistive devices. The human musculoskeletal design and control differ from distal to proximal joints in the leg. The specific mechanical properties of different leg parts could simplify motor control, e.g., by taking advantage of passive body dynamics. This control embodiment is complemented by neural reflex circuitries shaping human motor control. This study investigates the contribution of specific passive and active properties at different leg joint levels in human hopping at different hopping frequencies. We analyze the kinematics and kinetics of human leg joints to design and control a bioinspired hopping robot. In addition, this robot is used as a test rig to validate the identified concepts from human hopping. We found that the more distal the joint, the higher the possibility of benefit from passive compliant leg structures. A passive elastic element nicely describes the ankle joint function. In contrast, a more significant contribution to energy management using an active element (e.g., by feedback control) is predicted for the knee and hip joints. The ankle and knee joints are the key contributors to adjusting hopping frequency. Humans can speed up hopping by increasing ankle stiffness and tuning corresponding knee control parameters. We found that the force-modulated compliance (FMC) as an abstract reflex-based control beside a fixed spring can predict human knee torque-angle patterns at different frequencies. These developed bioinspired models for ankle and knee joints were applied to design and control the EPA-hopper-II robot. The experimental results support our biomechanical findings while indicating potential robot improvements. Based on the proposed model and the robot's experimental results, passive compliant elements (e.g. tendons) have a larger capacity to contribute to the distal joint function compared to proximal joints. With the use of more compliant elements in the distal joint, a larger contribution to managing energy changes is observed in the upper joints.

Slack-based tunable damping leads to a trade-off between robustness and efficiency in legged locomotion

Implementation of Stable and Efficient Hopping with Serial Elastic Actuators

Effective Viscous Damping Enables Morphological Computation in Legged Locomotion

Stable Running on A Kneed Biped Robot with Only Hip-Joint Actuation

Optimizing and designing a leg shape to increase robustness of a running robot on rough terrain

Diaphragm Ankle Actuation for Efficient Series Elastic Legged Robot Hopping

Bipedal locomotion using variable stiffness actuation

Hybrid leg compliance enables robots to operate with sensorimotor delays and low control update frequencies

Muscle pre-stimulation tunes viscous-like perturbation rejection in legged hopping

Optimizing Design and Control of Running Robots Abstracted as Torque Driven Spring Loaded Inverted Pendulum (TD-SLIP)

Role of compliant mechanics and motor control in hopping - from human to robot

Efficient, Responsive, and Robust Hopping on Deformable Terrain

Robust and efficient walking with spring-like legs

Mechanics and optimization of undulatory locomotion in different environments, tuning geometry, stiffness, damping and frictional anisotropy

3D-SLIP model based dynamic stability strategy for legged robots with impact disturbance rejection

A model-based strategy for quadruped running with differentiated fore- and hind-leg morphologies

Extending The Lossy Spring-Loaded Inverted Pendulum Model with a Slider-Crank Mechanism

Maximize the Foot Clearance for a Hopping Robotic Leg Considering Motor Saturation

Enhancing Adaptability Of A Legged Walking Robot With Limit-Cycle Based Local Reflex Behavior

Nonlinear stiffness allows passive dynamic hopping for one-legged robots with an upright trunk

An Open Torque-Controlled Modular Robot Architecture for Legged Locomotion Research