Abstract:In Partial Shading Conditions (PSCs), Photo Voltaic (PV) systems often experience notable output power and efficiency reductions due to weather variations. This study is dedicated to determining the most effective PV array configuration under partial shading. Various configurations, including Series Parallel (SP), Total Cross Tied (TCT), Bridge Linked (BL), Honey Comb (HC), Double Tied (DT), and hybrid connections, are simulated and evaluated under PSCs. Nine shading patterns, such as vertical, horizontal, centre-wise, upper triangular, cross-wise, expansive, arbitrary, L-shaped, and diagonal, are examined using a 6 × 6 array of PV Configuration. Performance analysis is based on parameters such as open circuit voltage (V oc ), short circuit current (I sc ), Global Maximum Power Point (GMPP), maximum voltage (V m ), maximum current (I m ), Fill Factor (FF), Mismatch Loss (ML)/Power Loss (PL), and efficiency (η). Additionally, hybrid configurations like Alternate- Total Cross Tied -Bridge Linked (ALT-TCT-BL), Alternate -Total Cross Tied -Double Tied (ALT-TCT-DT), and Alternate -Total Cross Tied -Triple Tied (ALT-TCT-TT) are investigated and compared with existing configurations. Hybrid configurations with fewer cross-ties are recommended to simplify circuit complexity. MATLAB/Simulink software is employed for simulation, using a Sunpower SPR-E18-295-COM panel. Comparative analysis confirms that hybrid configurations exhibit higher efficiency for various shading patterns than existing configurations, equal or at par with the TCT connection. For eight connections and nine shading scenarios along with zero (no) shading conditions, eighty distinct combinations have been analysed, and on comparative analysis with contemporary work, the optimal output is obtained from the connections considered under PSCs. For all the shading patterns considered, the proposed work fetches maximum efficiency compared to the contemporary work, and it ranges between 13.61 % and 17.84 % for different shading patterns. The maximum value of efficiencies for horizontal, vertical, diagonal, centre-wise, expansive, arbitrary, upper triangular and L-shaped shading patterns is 13.77 %, 17.24 %, 17.84 %, 15.66 %, 13.61 %, 17.21 %,17.35 % and 15.11 % respectively. The hybrid configuration achieves higher efficiency than current methods for all shading patterns and configurations, with improvements in efficiency ranging from 2.1 % to 42.22 % across all cases.

Modified Odd–Even–Prime pattern for effective dispersion of shade over the PV array under partial shading conditions

Performance evaluation of different photovoltaic array configurations under partial shading

A Comprehensive Shade Resilient Approach for Enhanced PV Array Performance Under Irradiance Mismatch Conditions

Composite MPPT Control Algorithm with Partial Shading on PV Arrays

Improved non-symmetrical puzzle reconfiguration scheme for power loss reduction in photovoltaic systems under partial shading conditions

A selective cross-tied array configuration technique for partial shaded solar PV system

Mitigation of mismatch losses in solar PV systems: a hybrid L-shaped propagated array configuration approach

Multi-step optimization for reconfiguration of solar PV array for optimal shade dispersion

Optimal battery based electrical reconfiguration technique for partial shaded PV system

A Simple Global Maximum Power Point Tracking Scheme with Region Segmentation for Partially Shaded PV Modules

A novel arithmetic sequence pattern reconfiguration technique for line loss reduction of photovoltaic array under non-uniform irradiance

Effect of Partially Shaded Conditions on Photovoltaic Array's Maximum Power Point Tracking

Comparative Study of Optimal PV Array Configurations and MPPT under Partial Shading with Fast Dynamical Change of Hybrid Load

Analysis of ludo-shaped configuration of PV arrays under different partial shaded configuration

Evaluation Of Interconnection Configuration Schemes For Pv Modules With Switched-Inductor Converters Under Partial Shading Conditions

A novel cross diagonal pattern for effective shade dispersion in TCT configuration

A novel Global maximum power extraction technique for partial shaded solar PV system

Reduced partial shading effect and enhancement of performance metrics using a Fibonacci based algorithm

A Simple Mismatch Mitigating Partial Power Processing Converter for Solar PV Modules

Intrinsic-Capacitance-based Differential Power Processing for Photovoltaic Modules

Optimal PV Reconfiguration Under Partial Shading Based on White Shark Optimization