Abstract:An experimental and computational investigation directed at understanding the role of buoyancy-driven convection during constrained melting of phase change materials (PCM) inside a spherical capsule is reported. The computations are based on an iterative, finite-volume numerical procedure that incorporates a single-domain enthalpy formulation for simulation of the phase change phenomenon. A Darcy’s Law-type porous media treatment links the effect of phase change on convection. Paraffin wax n-octadecane was constrained during melting inside a transparent glass sphere through the use of thermocouples installed inside the sphere. The melting phase front and melting fraction of the PCM are analyzed and compared with numerical solution obtained from the CFD code Fluent. Following a short period of symmetric melting due to prominence of diffusion, expedited phase change in the top region of the sphere and a wavy surface at the bottom of the PCM are observed. The computational predictions point to the strong thermal stratification in the upper half of the sphere that results from rising of the molten liquid along the inner surface of the sphere thus displacing the colder fluid. The waviness and excessive melting of the bottom of the PCM is shown to be underestimated by the experimental observation. This discrepancy is linked to the use of a support structure to hold the sphere. Measured temperature data and computational results near the bottom indicate the establishment of an unstable fluid layer that promotes chaotic fluctuations and is responsible for waviness of the bottom of the PCM. On the other hand, the comparison between the measured and computed temperatures in the top half of the sphere show the stable nature of the molten liquid layer. The computational results start to deviate from the thermocouple readings as one moves lower from the top of the sphere. This delay in predicting the melting instant is linked to the thermal stratification within the “constant temperature bath” that encloses the capsule.

The "Effect of Marangoni Convection on Heat Transfer in Phase Change Materials" experiment: Design and performance of the cuboidal cell

Experimental Investigation of the Comprehensive Heat Transfer Performance of PCMs Filled with CMF in a Heat Storage Device

An Experimental Investigation of Constrained Melting Heat Transfer of Nano-Enhanced Phase Change Materials in a Horizontal Cylindrical Capsule Using Thermochromic Liquid Crystal Thermography

Heat Transfer During Constrained Melting of Nano-Enhanced Phase Change Materials in A Spherical Capsule: an Experimental Study

Experimental and Computational Study of Constrained Melting of Phase Change Materials (pcm) Inside A Spherical Capsule

Thermal conductivity enhancement of phase change materials for thermal energy storage: A review

Thermophysical Properties of a Novel Nanoencapsulated Phase Change Material

A volume-shrinkage-based method for quantifying the inward solidification heat transfer of a phase change material filled in spherical capsules

Melting Performance Enhancement of Phase Change Material with Magnetic Particles under Rotating Magnetic Field

Performance Enhancement of Latent Thermal Energy System under Alternating Magnetic Field

Experimental Investigation On Laminar Forced Convection Heat Transfer Enhancement Of Microencapsulated Phase Change Suspension With Constant Heat Flux

Experimental investigation of thermal performance in a shell-and-tube phase change thermal energy storage unit with an inner square tube

Heat transfer mechanism in solar thermal energy storage systems using phase change materials

Experimental Investigation into Heat Transfer Enhancement of Phase Change Material

Experimental study on a loop thermosyphon with microencapsulated phase change material suspension

EXPERIMENTAL RESEARCH ON LAMINAR FORCED CONVECTION HEAT TRANSFER CHARACTERISTICS OF MICROENCAPSULATED PHASE CHANGE MATERIAL SUSPENSION

An experimental study of melting behavior of the phase change material in cylindrical capsules for thermal energy storage

Experimental and numerical analysis of a phase change material-based shell-and-tube heat exchanger for cold thermal energy storage

Investigation of Phase Change Material Integrated With High Thermal Conductive Carbon Foam Inside Heat Sinks for Thermal Management of Electronic Components

Thermal performance investigations of the melting and solidification in differently shaped macro-capsules saturated with phase change material

Simulation and Experimental Investigation of the Effect of Pore Shape on Heat Transfer Behavior of Phase Change Materials in Porous Metal Structures