Abstract:The influence of hollow ZSM-5 catalysts prepared with two different kinds of alkalis on catalytic performances in methanol to aromatics was studied. It was found that benzene, toluene, and xylene (BTX) selectivities of hollow catalysts were higher than the parent ZSM-5 catalyst due to increasing mesopore volumes and acid strength. Meanwhile, the catalyst prepared by NaOH treatment exhibited higher BTX selectivity than the catalyst prepared by tetrapropylammonium hydroxide treatment. The reason was that the concentration of strong acid sites, Brønsted acid sites, and framework alumina in channel crossings was higher than that of the catalyst prepared by NaOH treatment. All these favored the formation of aromatics. Moreover, the introduction of hollow structures with mesopores improved diffusion behaviors of species and reduced the deactivation rate of the catalysts. However, a relatively higher deactivation rate was obtained over the NaOH-treated sample due to increasing strong acid sites.This article has not yet been cited by other publications.

What problem does this paper attempt to address?

The problems that this paper attempts to solve are: How to improve the selectivity of methanol conversion to aromatics (especially benzene, toluene and xylene, i.e. BTX) and the stability of the catalyst by using hollow ZSM - 5 zeolite catalysts prepared by different alkali treatments. Specifically, the research aims to explore the following issues: 1. **Improving BTX selectivity**: Traditional ZSM - 5 zeolite has a low aromatics yield and a high deactivation rate in the methanol - to - aromatics reaction, mainly due to the diffusion limitations within micropores. Can the selectivity of BTX be improved by introducing hollow structures and mesopores? 2. **Optimizing catalyst stability**: What are the effects of different alkali treatments on the acidic sites, framework aluminum content and mesopore volume of the catalyst? Can these changes improve the stability and lifetime of the catalyst? 3. **Comparing the effects of different alkali treatments**: Are there significant differences in the catalytic performance between the hollow ZSM - 5 zeolites prepared by two different alkali treatments, sodium hydroxide (NaOH) and tetrapropylammonium hydroxide (TPAOH)? Which treatment method is more conducive to improving BTX selectivity and catalyst stability? ### Research background With the development of relevant chemical industries, the demand for aromatics is constantly increasing, and the traditional aromatics production routes are difficult to meet market demands. Therefore, the methanol - to - aromatics (MTA) process has received extensive attention. ZSM - 5 zeolite is often used in the MTA process because of its shape selectivity, thermal stability and adjustable acidic properties. However, traditional ZSM - 5 zeolite has problems of low aromatics yield and high deactivation rate in the MTA reaction, mainly due to the diffusion limitations within micropores. For this reason, researchers have attempted to improve the performance of ZSM - 5 zeolite by introducing mesopores. ### Main findings 1. **Advantages of hollow structures**: By introducing hollow structures and mesopores through alkali treatment, the selectivity of BTX can be significantly improved, and the diffusion performance of the catalyst can be improved, thereby prolonging the service life of the catalyst. 2. **Effects of different alkali treatments**: - The catalyst treated with NaOH shows a higher BTX selectivity because it has a higher concentration of strong acid sites. - Although the catalyst treated with TPAOH has an increase in weak acid sites, its outer surface area is larger, which helps to improve the stability and diffusion performance of the catalyst. 3. **Changes in acidic sites**: After alkali treatment, the acidic sites of the catalyst have changed, especially the Brønsted acid sites have increased significantly, while the Lewis acid sites have decreased. This change is conducive to the formation of aromatics, but it may also lead to an increase in carbon deposition, which in turn affects the stability of the catalyst. ### Conclusion This study shows that the hollow ZSM - 5 zeolite catalysts prepared by different alkali treatments exhibit excellent catalytic performance in the methanol - to - aromatics reaction. The catalyst treated with NaOH performs better in terms of BTX selectivity, while the catalyst treated with TPAOH has advantages in terms of stability and diffusion performance. This research provides new ideas and methods for the development of highly efficient and stable MTA catalysts. Through the above research, the paper has successfully solved the problem of how to improve the MTA reaction efficiency through material modification and provided valuable references for future research.

Influence of Hollow ZSM-5 Zeolites Prepared by Treatment with Different Alkalis on the Catalytic Conversion of Methanol to Aromatics

Catalytic Fast Pyrolysis of Cellulose in a Microreactor System Using Hierarchical Zsm-5 Zeolites Treated with Various Alkalis

Creating Mesopores in ZSM-5 Zeolite by Alkali Treatment: A New Way to Enhance the Catalytic Performance of Methane Dehydroaromatization on Mo/HZSM-5 Catalysts

Effects of post treatment of HZSM-5 zeolites on catalytic cracking of butene

Catalytic properties and deactivation behavior of modified H-ZSM-5 in the conversion of methanol-to-aromatics

Influence of framework Al distribution in HZSM-5 channels on catalytic performance in the methanol to propylene reaction

Influence of Channel, Construction and Brønsted Acid Sites on the Catalytic Conversion Pathways of Isobutane over MFI, TON and RFE Zeolites

Influence of Catalyst Acidity on Dealkylation, Isomerization and Alkylation in Mta Process

Effect of ZSM-5 Acid Modification on Aromatization Performance of Methanol

Catalytic Performance of Methanol to Aromatics over Hierarchical ZSM-5 Zeolite Synthesized by a Soft Template Method

Aromatization of Methanol over La/Zn/HZSM-5 Catalysts

Relay and Feedback Conversion Effect of Hydrocarbons between ZSM-5 Grains on Product Selectivity and Coke Formation during Methanol Aromatization

Selective Alkylation of Benzene with Methanol to Toluene and Xylene over H-ZSM-5 Zeolites: Impact of Framework Al Spatial Distribution

One-step Synthesis of Hierarchical ZSM-5 Zeolites and Their Catalytic Performance on the Conversion of Methanol to Aromatics

Comparative study on the catalytic behaviors of zeolites with different diffusion limitation in ethane aromatization

Synthesis of hollow HZSM-5 zeolite-based catalysts and catalytic performance in MTA reaction

In Situ Synthesis of Metal-Containing ZSM-5 and Its Catalytic Performance in Aromatization of Methanol.

Size controllable synthesis of ZSM-5 zeolite and its catalytic performance in the reaction of methanol conversion to aromatics

Effect of Preparation Method on the Catalytic Performance of HZSM-5 Zeolite Catalysts in the MTH Reaction

Regulation of framework Al distribution of high-silica hierarchically structured ZSM-5 zeolites by boron-modification and its effect on materials catalytic performance in methanol-to-propylene reaction

High-Impact Promotional Effect of Mo Impregnation on Aluminum-Rich and Alkali-Treated Hierarchical Zeolite Catalysts on Methanol Aromatization