Liquid Viscosity for Binary Mixtures of R22 + R1234ze(E) and R22 + R1234yf from (273 to 353) K at Pressures Up to 15 MPa
Ximei Liang,Jinrong Sun,Xianyang Meng,Jiangtao Wu
DOI: https://doi.org/10.1016/j.jct.2021.106641
IF: 3.269
2021-01-01
The Journal of Chemical Thermodynamics
Abstract:Liquid viscosities for two binary systems of chlorodifluoromethane (R22) + Trans-1,3,3,3-Tetrafluoropr op-1-ene (R1234ze(E)) and chlorodifluoromethane (R22) + 2,3,3,3-tetrafluoroprop-1-ene (R1234yf) were measured with a vibrating-wire viscometer. Measurements were operated at 5 isotherms over the tem-perature range from (273 to 353) K and at pressures from slightly above saturation pressure up to 15 MPa. Four mole fractions of R22 were covered for each system, more specifically, x(1) = (0.2269, 0.4376, 0.6379, and 0.8212) for R22 (1) + R1234ze(E) (2) and x(1) = (0.2214, 0.4510, 0.6296, and 0.8163) for R22 (1) + R1234yf (2). The combined expanded uncertainty (k = 2) of the measured viscosity is about 2.0%. In addition, the extended hard-sphere (EHS) model was used to correlate the experimental viscosi-ties for each individual composition, respectively. The average absolute relative deviations between the calculation and experiment for R22 + R1234ze(E) and R22 + R1234yf are within 0.3% and 0.4%, respectively. In addition, the EHS model combined with the mixing rules was applied to estimate the viscosity of these binary mixtures. The predicted results are in good agreement with the experimental data with relative deviations range from (-4.41 to 3.15) %. (C) 2021 Elsevier Ltd.